Akg Hub 4000 Q Hiqnet Ethernet Interface Dms700 Wms4000 Ivm4

Product Code: eq151129
Availability: In Stock

$3,000.00 $4,170.00

Qty

13 reviews Write a review

Description
Reviews (13)

Connect up to eight AKG wireless devices to a HiQnet network with the HUB 4000 Q HiQnet Ethernet Interface. The unit connects to your network via a standard Cat 5 cable and allows you to integrate the DMS 700 and WMS 4000/4500 professional wireless microphones, as well as the IVM 4 professional in-ear monitoring system into your HiQnet network.

For large wireless systems, several HUB 4000 Qs can be cascaded using commercial Ethernet switches (or routers, wireless hubs, etc.), allowing you to configure and monitor complex systems from a single application. HUB 4000 Q connects the wireless system to the applications Harman Audio Architect, AKG Wireless app, and VM2. The HUB 4000 Q comes in a rugged half-rack metal housing and provides 10 LEDs with information on the data transfer status as well as 4 DIP switches to set up the IP address. Please note that a 12V, 500mA power supply is available separately.

Add up to 8 Devices to HiQnet Network For DMS 700, WMS 4000/4500 Wireless Mics For IVM 4 In-Ear Monitoring Remote Control via Various Apps 10 LEDs for Statuses Ethernet Cascading, Covered DIP Switches Rugged Half-Rack Metal Housing Power Supply Not Included

General
Compatibility	AKG DMS 700 / WMS 4000/4500 / IVM 4
Display
Panel Type	Single-Color LED
Display Size	Not Specified by Manufacturer
Touchscreen	No
Inputs / Outputs
Connectors	Connectors for AKG Devices: RJ11 Connector for Network Card: RJ45
Wireless
Mobile App Compatible	Yes: iOS Only App Name: AKG Wireless iPhone app Functionality: Remote Control
Power
Power Source	AC Adapter with Power Brick (Not Included)
DC Input Power	12 VDC
Operating Current	200 mA (Maximum)
Environmental
Operating Temperature	14 to 140°F / -10 to 60°C
Physical
Mounting	1x Rackmounting Kit (Included)
Cable Length	Not Specified by Manufacturer
Dimensions	7.8 x 7.5 x 1.7" / 19.8 x 19.1 x 4.3 cm
Weight	2.1 lb / 970 g

Connects up to eight AKG devices such as DSR 700s, SR 4500/400s, and SST 4s to a HiQnet system
Integrates DMS 700, WMS 4000/4500 professional wireless microphones, and an IVM 4 professional in-ear monitoring system into any HiQnet system
Connects to the HiQnet system via 10Mb half-duplex Ethernet
Enables you to to control and monitor an AKG wireless microphone system using System Architect software or the AKG Wireless iPhone application
For large wireless systems, connect several HUB 4000 Qs using standard Ethernet switches (or routers / wireless hubs). This lets you configure and monitor the entire system from a single computer

Related Questions and Answers

Q: 1. Can I use this MIDI hub in a live show? And would each MIDI controller work individually in Ableton Live (using different VSTs on each MIDI controller of course)?

A: Yes, the ESI M4U eX could be used for a live performance. Each MIDI input will be recognized as a separate channel by your DAW.

Q: 2. Does this need to be connected to a powered Clearcom line to work?

A: Yes it must be powered.

Q: 3. Can I use this as a triple midi usb to din converter? I mean, using three usb midi controllers at same time sending to different midi din outs

A: Unfortunately not.

Q: 4. Could this function as a passive volume controller with 2 computer inputs via USB?

A: No, it can not be used as a passive volume knob for your computer.

Q: 5. Will this work with 2 Wire and 4 Wire Clearcom systems?

A: The Eartec HUB Interface for ClearCom Systems (BH # EAHUBINCC) works with ClearCom 2-wire and 4-wire systems.

Q: 6. Is this compatible with iOS devices like iPad Pro? Provide you use the included power adapter?

A: The M-Audio AIR | Hub Desktop USB Monitoring Interface with Built-In USB Hub does not specify compatibility between its host USB Type-C connection and mobile devices such as the iPad Pro. In theory, the iPad could interface with one of the onboard USB Type-A hub connections on the front of the unit.

Q: 7. I have the 4 pack eartec headsets, that work with master headset and 3 slaves. For the hub interface to clearcom, will I also need to buy the Hub? So will I need both the hub and hub interface?

A: Yes, you will need to use the HUB (B&H # EAHUB) and the HUB interface together. The HUB works in the same manner as the master headset you already have, so it replaces the master headset. The HUB can be used with eight wireless UltraLite remote headsets and one wired headset.

Q: 8. Can this be used to connect a computer(running ProPresenter) to a lighting controller(separate hardware)?

A: Yes, the ESI M4U eX 8-Port USB 3.1 Gen 1 MIDI Interface with USB Hub could be used to connect a lighting controller operating over standard 5-Pin MIDI protocol to a computer running a specific, correlating software.

Q: 9. I am looking to use the Hub to connect a Whirlwind THS-4 instead of a comm system. Is this possible?

A: The Eartec Hub systems are not designed to be adapted into the the Whirlwind THS-4 system.

Q: 10. We currently have a wired Clearcom system. We’d like to add some wireless headsets to that existing system. If we purchase this and the Eartec 4 pack headset this should add that functionality?

A: Yes, you can use this HUB Interface for Clearcom with up to 8 of their ULTRAlite headsets, to add wireless stations to your existing Clearcom hard-wired system.

Dustin	29/09/2024
[12 VDC] I am not sure i needed another hub but the one i had was a bit cheap looking and feeling. This is solid, sleek and performs well. 5

Evilgeniuz	22/09/2024
[12 VDC] I bought this for my house and am blown away with its performance. I have very high expectations, but this just took it to another level, in fact I see myself purchasing a 2nd one. I don't like my neighbors so with a 2nd one I should see for sale signs going up soon. One note for any of you that are installing this in your home, you will run into a problem if your trying to run it out of the back of your AVR, the signal to the sub will not work as it is not strong enough. I had to purchase a small mixer, ran the sub ouput from my AVR to the mixer, and a 1/4" jack from the mixer to the Sub. Dont use a XLR connector is it is a balanced cable and does not work as well as a 1/4" unbalanced as I had to plug it into a RCA jack in my wall which is unbalanced as well. With the mixer this sub just flat kills it. It is amazing and I highly recommend it. 5 Stars. 5

Ramkin	03/09/2024
[12 VDC] The interface worked great, I have it connected to two Yamaha hs5's using TS cables and it's fantastic. There is noise but it's only when it's out at full volume. The dial is clean and looks great on my desk. Fantastic interface! Definitely interested in looking into new ones my m audio. 5

William	01/09/2024
[12 VDC] For probably a couple years now I've used this device to control a bunch of home and studio lighting. I have bespoke lighting control software that talks to it over ArtNet, and I use it to control a bunch of pavotubes and nanlite spots and so on. Zero issues. 5

Anonymous	21/08/2024
[12 VDC] Rock solid performance and Construction... 5

Leonard	16/08/2024
[12 VDC] Love it - works great & gives laptop 3 more USB ports. Best purchase I could have made. B&H customer service is the best I have ever felt with. 5

Melissa	14/08/2024
[12 VDC] Would recommend 5

Jeffrey W.	29/06/2024
[12 VDC] This worked as advertised. Good buy. 5

Floyd	01/06/2024
[12 VDC] This little Midi Box is a welcome addition to my Midi Configuration Studio needs. At first I was reluctant to purchase it because I felt it was a bit expensive for a Midi Interface... but it is worth it. Here's why Pros Excellent Build Quality, solid top grade materials and it looks good Works without the need for driver installation, so easy plug and play 8 Standard 5 Pin Midi Ports Plus 3 USB 3.0 Ports and a USB Host Port which gives me lots of options for all of my gear Automatic signal detection is great. Allows each MIDI port to work as an input or output LED Indicator Lights let you know what's going on In Standalone (without a computer) there are 3 modes with a dedicated Mode Selector, 1 Midi In to 7 Outs, MIDI thru and MIDI merge configurations You can use it as a Stand Alone or USB Host mode Ships with USB Cable and 5V Power Supply, yes they include a power supply! Cons Price but NOT really this is one well built, powerful Midi Interface that is loaded with Connection and Interface Options. I think it is worth the money for what it offers. 5

Dustin	29/05/2024
[12 VDC] This thing is a game-changer. I've been doing live sports productions for almost 10 years and never knew about this but it solves a MAJOR problem in that wireless (clear com/telex) headsets are EXPENSIVE! You can get an eartec set and this interface and then use your WIRED clear com and suddenly expand your capabilities heavily. This thing is incredible and I will be ordering more of them to use with other comm systems that we use doing sports productions around our state. 5