Designed for both the RS 3 Pro and RS 4 Pro gimbal stabilizers, the DJI Focus Pro Combo - All-In-One Gimbal Solutionunit makes achieving intelligent autofocus intuitive and easy for solo cinematographers. The rangefinder unit makes focusing on objects in motion a breeze thanks to its expanded 76,800 ranging points, 30 Hz refresh rate, and 65.6' maximum detection area. This allows it to support both wide-angle and telephoto lens configurations.

The unit features a built-in camera with an equivalent 30mm focal length and 70° field of view to ensure accurate focus. Toggle between wide-angle, telephoto, and focus spot modes depending on the needs of your shoot. ActiveTrack Pro is activated when paired with the RS 4 Pro gimbal for improved recognition and tracking performance with multiple subjects or subjects at a distance. It is compatible with the Focus Pro Motor to provide accurate cinema-style autofocus. The LiDAR unit mounts on your RS 3 or 4 Pro series gimbal or camera via cold shoe or 1/4"-20 thread, and it is powered via a USB-C power cable.

For DJI RS 3 and RS 4 Pro Gimbals    Focus Pro LiDAR, Focus Pro Motor    Focus Pro Grip, Focus Pro Hand Unit    Carrying Case

When paired with the Focus Pro Motor, the LiDAR unit can facilitate autofocus with compatible lenses. The unit's 76,800 ranging points can project within a 1.6 to 65.6' area. It also features a built-in camera with an equivalent focal length of 30mm and a wide FOV of 70°, catering to the focusing needs of most scenarios.

The next-generation ActiveTrack Pro can directly read images from the camera built into the Focus Pro LiDAR Autofocus without needing the Ronin Image Transmitter. When using ActiveTrack Pro, you can directly monitor or frame the subject on the RS 4 Pro's OLED touchscreen. Even if the target is briefly obscured, the LiDAR unit can quickly relocate and retain focus.

• Tracking: Recognize up to five subjects at the same time and select one to follow
• Smart Object Identification: Human and vehicle
• Flex Spot: Activate focus lock by framing the subject and pressing the gimbal trigger; supports autofocus only
• Wide: Automatically detects subject and follows focus; supports autofocus and ActiveTrack

Use the USB-C data port to connect the LiDAR unit with the Focus Pro Motor for cinematic autofocus capability after calibration. Press the M button on the gimbal to switch between manual and autofocus with ease.

Related Questions and Answers

Q: 1. Does the Focus Pro Grip also let you control a zoom and/or iris motor along with the focus? Or only 1 motor at a time?

A: The Focus Pro Grip with the DJI Focus Pro All-In-One Combo can switch the control dial from Focus to Zoom via the touchscreen. The motor must be set to the intended mode for the respective control.

Q: 2. Can the Focus Pro Hand Unit control the lidar unit, or is it only the Grip which can do this? If so, how is lidar info displayed

A: The DJI Lidar Pro is powered and controlled with the DJI Hand grip only. The Grip has a small display for setup and control as well as setting focus points..

Q: 3. How can one enter focal length above 100mm?

A: The DJI Focus Pro All-In-One Combo is not compatible with lens focal lengths above 100mm due to the DJI Focus Pro LiDAR requiring a calibration range at 1 meter or 3.28 ft.

Q: 4. Is there longer cables that work with the motors and lidar? USB-c has much longer options but they do not seem to work

A: At this moment we do not have longer cable options for the DJI Focus Pro All-In-One Combo.

Q: 5. Where can we buy the mount to connect the hand unit to the DJI monitor, as it is a key piece of gear, yet it seems unavailable?

A: At this time, DJI has not yet released the mount for the DJI Focus Pro Hand Unit in the DJI Focus Pro All-In-One Combo in order to mount the DJI High-Bright Remote Monitor.

Q: 6. hand control unit can control FIZ but how does autofocus work on a zoom where focal length deviates from set focal length?

A: The DJI Focus Pro All-In-One Combo can only be used with manual lenses that have mechanical endpoints. If it is a prime lens, it will only support lenses up to 100mm. If it is a zoom lens (parfocal), like a 24-135mm focal length lens, calibration would be required at the 24mm focal length before being used.

Q: 7. What are the latest accessories need to get this work with the transmission system?

A: The DJI Focus Pro All-In-One Combo and DJI Transmission with High-Bright Monitor Combo currently do not integrate.

Q: 8. I see it says it will work with RS 3 & RS 4 Pro gimbals, but will it still work with the RS 2?

A: No, the DJI Focus Pro All-In-One Combo is not compatible with the DJI RS2 Pro Gimbal Stabilizer.

Q: 9. Is there an accessory just to output the video feed with the lidar depth map to a bigger monitor? Without rigging transmission….

A: Currently the DJI Focus Pro LiDAR depth map of the DJI Focus Pro All-In-One Combo is only available when used in conjunction with the DJI Transmission with High-Bright Monitor Combo, BH #DJTRC.

Q: 10. Where is the link for the new DJI Focus Pro LiDAR to DJI Transmission Cable Hub? That’s need to hook up the transmission system?

A: There are a few products that were sent to influencers that have yet to be released by DJI. Both the new cable hub and the DJI Hi Bright Monitor mount have not been released as products from DJI. We do not have a timeframe when they will be available.