Designed for both the RS 3 Pro and RS 4 Pro gimbal stabilizers, the DJI Focus Pro Combo - Advanced Gimbal for Creatorsunit makes achieving intelligent autofocus intuitive and easy for solo cinematographers. The rangefinder unit makes focusing on objects in motion a breeze thanks to its expanded 76,800 ranging points, 30 Hz refresh rate, and 65.6' maximum detection area. This allows it to support both wide-angle and telephoto lens configurations.

The unit features a built-in camera with an equivalent 30mm focal length and 70° field of view to ensure accurate focus. Toggle between wide-angle, telephoto, and focus spot modes depending on the needs of your shoot. ActiveTrack Pro is activated when paired with the RS 4 Pro gimbal for improved recognition and tracking performance with multiple subjects or subjects at a distance. It is compatible with the Focus Pro Motor to provide accurate cinema-style autofocus. The LiDAR unit mounts on your RS 3 or 4 Pro series gimbal or camera via cold shoe or 1/4"-20 thread, and it is powered via a USB-C power cable.

For DJI RS 3 and RS 4 Pro Gimbals    Focus Pro LiDAR, Focus Pro Motor    Focus Pro Grip    Carrying Case

When paired with the Focus Pro Motor, the LiDAR unit can facilitate autofocus with compatible lenses. The unit's 76,800 ranging points can project within a 1.6 to 65.6' area. It also features a built-in camera with an equivalent focal length of 30mm and a wide FOV of 70°, catering to the focusing needs of most scenarios.

The next-generation ActiveTrack Pro can directly read images from the camera built into the Focus Pro LiDAR Autofocus without needing the Ronin Image Transmitter. When using ActiveTrack Pro, you can directly monitor or frame the subject on the RS 4 Pro's OLED touchscreen. Even if the target is briefly obscured, the LiDAR unit can quickly relocate and retain focus.

• Tracking: Recognize up to five subjects at the same time and select one to follow
• Smart Object Identification: Human and vehicle
• Flex Spot: Activate focus lock by framing the subject and pressing the gimbal trigger; supports autofocus only
• Wide: Automatically detects subject and follows focus; supports autofocus and ActiveTrack

Use the USB-C data port to connect the LiDAR unit with the Focus Pro Motor for cinematic autofocus capability after calibration. Press the M button on the gimbal to switch between manual and autofocus with ease.

Related Questions and Answers

Q: 1. Does this kit come with the battery for the hand unit? Or is this something we need to buy extra?

A: The DJI Focus Pro Hand Unit included in the DJI Focus Pro All-In-One Combo does not come with a battery included. An NP-F550 battery such as the Watson NP-F550 Lithium-Ion Battery Pack (7.4V, 2200mAh), BH #WANPF550, would be necessary to operate the hand unit.

Q: 2. Can we use the Focus pro with non hard hard-stop lens ?

A: No, DJI recommends only using lenses with hard stops like Cinema Lenses when using the DJI Focus Pro All-In-One Combo.

Q: 3. Can you change the lidar from 30 frames a second

A: At this moment we are not aware that the DJI Lidar sensor capture rate can be changed.

Q: 4. I see it says it will work with RS 3 & RS 4 Pro gimbals, but will it still work with the RS 2?

A: No, the DJI Focus Pro All-In-One Combo is not compatible with the DJI RS2 Pro Gimbal Stabilizer.

Q: 5. Is there longer cables that work with the motors and lidar? USB-c has much longer options but they do not seem to work

A: At this moment we do not have longer cable options for the DJI Focus Pro All-In-One Combo.

Q: 6. DJI Focus Pro Grip can i connect it wireless to the system so i am able to select subject tracking and focus + start recording ?

A: Yes, with supported cameras the grip would control focus and start/stop from the handle. The Handle would also power a servo motor. Lidar Pro as well. It is designed to only work with products in the DJI ecosystem. We would suggest working with the DJI Focus Pro Hand unit and Hi Bright monitor B&H # DJHBRM or DJI Transmission with High-Bright Monitor Combo BH #DJTRC for wireless control. Camera compatibility: https://bhpho.to/49Y7ET4

Q: 7. Will this handle work with the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals BH #TITGAARG?

A: The DJI Focus Pro Grip of the DJI Focus Pro All-In-One Combo can mount onto the NATO mounting points of the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals, but the grip is designed to be connected directly to the focus motor and may not be a functional setup.

Q: 8. Do the lens templates/pre-sets include Zeiss CP.3, Supreme Prime, Atlas Orion, Atlas Mercury, etc.?

A: DJI has not released a lens list for the DJI Focus pro at this moment. We will update this question as soon as more info arrives.

Q: 9. What are the latest accessories need to get this work with the transmission system?

A: The DJI Focus Pro All-In-One Combo and DJI Transmission with High-Bright Monitor Combo currently do not integrate.

Q: 10. Is this system compatible with the prior motors (RS motors), the prior LIDAR unit, or the Cable hub?

A: DJI has not released compatibility information on the DJI LiDAR Range Finder or the DJI RS Focus Motor (2022). We will update this question as soon as this info is released.