The beige Galaxy Audio HSM4F Adjustable Dual-Ear Headset Microphone Beigeis a fully adjustable headset and four detachable 4' cables designed for compatibility with Sennheiser wireless transmitters (available separately). The headset provides a practical, economic, and hands-free audio capture solution for applications such as speeches, lectures, board meetings, and more. The 5mm electret condenser element utilizes a forgiving omnidirectional polar pattern, yields a frequency response of 85 Hz to 15 kHz, and can handle SPLs up to 110 dB.

The soft microphone boom allows for easy adjustment of the microphone's position from 1.5 to 7.9" as you wear the headset, which hooks around both ears for added stability. The headband adjusts from 8.5 to 15" to accommodate almost any head shape and size and is lightweight and comfortable, even for long periods of time, without using excessive pressure to hold the microphone in place. The supplied windscreen minimizes wind noise and vocal pops and remains discreet when installed.

For Sennheiser Transmitters    Headband Adjusts from 8.5 to 15"    Hooks Around Both Ears    5mm Electret Condenser, 110 dB SPL    85 Hz to 15 kHz Frequency Response    Omnidirectional Polar Pattern    Mic Boom Adjusts from 1.5 to 7.9"    Includes Windscreen    Includes Four Easy-Replace Cables

Fully adjustable headband with dual-ear hooks around both ears for a stable and comfortable fit

Omnidirectional back-electret condenser with 5mm element

Soft microphone stem allows easy positioning

Includes four detachable 4' cables, each terminated with a 3.5mm connector for Sennheiser wireless transmitters

1.5mm-thick cables won't weigh you down

Includes windscreen to guard against wind noise

Strain-relief clip inhibits damage to connector

Folds flat for storage and transport

Related Questions and Answers

Q: 1. is the blue button on the master supposed to be recessed? Does it have any function? When my charger is not red or green does that indicate a full charge?

A: Hello I'm not an eartech rep so maybe they can give exact anwsers. In either of my sets the rubber button on the earcup is used for the power and pairing on the remote headsets. On the master headsets however the power button is a physical rocker switch on the bottom of the earcup and the rubber button is shaved down but does still function as the pair button. Not sure about the light ont he carger. When mine are charging the led is red and when its done it stays lit green . Hope this info helps... best wishes! IMHO: Overall a great product! Saves our productions time and money.

Q: 2. what advantage does this have over a Y cable?

A: The construction of the box is more solid and wiring on the box is internal so it's protected from breakage and more durable than a basic Y-cable. Additionally, the JIB/Y also has phantom block circuitry that prevents phantom power from coming back into the splitter from the equipment the box is connected to. Phantom power can damage certain microphones so the JIB/Y offers protection from damage that can be caused by phantom power.

Q: 3. Can a dual-ear model be added to a single-ear system?

A: You can add a dual ear remote model to a single ear system. Please note the final total count of your system would have to equal either 1 master headset and up to 4 remote headsets, or 1 Hub mini and up to 8 total remote headsets. If you are uncertain about your system, please contact our Pro Audio Department for more information.

Q: 4. Does this also work to split the line level connection coming from a sound board so I can feed two cameras?

A: The manufacturer of the JIB/Y, Galaxy Audio, does not recommend it be used to split a line level signal. Alternatively, you may consider the Whirlwind LBS; B&H# WHLBS.

Q: 5. I already have BH# EAHUB742MXD. which is 7-person with HUB. Now I want to split this system into four head sets for each set. Basically I’m trying to buy another master head set (HUB is expansive). So I can split my 7 person set into 2 x four person sets Do I need a Hub or this master head ? will I have any problem pairing my current remote 3 headsets to this master headset? FYI we will be using these headsets in less than 500ft range Thank you

A: Without a hub you can have up to 5 headsets, as long as one is a master. Anything above 5 users will need a hub. You can run two seperate systems at the same time without crosstalk or interference.

Q: 6. Do these work specifically with the iPhone 15 Pro's? I know some USB-C devices don't work with them

A: The SonicPresence On-Ear USB-C Microphone for Spatial Audio is not officially compatible with the iPhone 15, so although it is certainly possible to work, the manufacturer has not guaranteed it.

Q: 7. Are this for sure having a noise cancelling mic or this is a mistake?

A: Yes, the Eartec UltraLITE Dual-Ear Master Headset does feature a noise-cancelling microphone. This headset is intended for use as the Master headset for an Eartec UlraLITE Full-Duplex Wireless Intercom System. The Master headset features built-in electronics to control up to four wireless remote headsets such as the Eartec UltraLITE Single-Ear Remote Headset with Rechargeable Lithium Battery (B&H # EAULSR).

Q: 8. Is this Remote Headset RF bandwidth system 1728 GHz compatible with the 1.9 GHz set (UltraLITE Single-Ear Remote headsets)?

A: Yes. This Eartec UltraLITE Dual-Ear Remote Headset - USA is compatible for use with the Eartec UltraLITE Full-Duplex Wireless Intercom which operates within the 1920 to 1930 MHz frequency band and the system bandwidth (width of the frequency band) is 1.728 GHz.

Q: 9. Is the SP15 Pro compatible with the Zoom F3?

A: Yes, the SonicPresence SP15 PRO On-Ear XLR Binaural Microphone for Spatial Audio can be used with the Zoom F3 2-Input / 2-Track Portable Field Recorder to capture binaural audio through the dual phantom-powered XLR inputs on the F3.

Q: 10. I'd like to add a new Eartec headset to my existing set. What is involved with pairing a new headset to the the master unit?

A: The fully wireless UltraLITE system can be used with up to 5 headsets while the HUB system can be used with up to 8 wireless headsets and 1 additional wired headset. Adding a headset to an existing system is fairly simple. Eartec provides written instructions and tutorial videos that explain the procedure. Here is a link to the main information page where you can select the system you have and then view the instructions: http://eartec.com/instruction/