The Genelec 9401A Audio-over-IP System Management Deviceworks by converting AoIP streams (ST2110, AES67, and Ravenna) into AES/EBU outputs, providing 16 channels of digital audio over the unit's DB-25 connector.

The 9401A features a dedicated subwoofer AES output and a flexible auxiliary stereo AES output. The converter is fully compatible with Genelec's UNIO Platform, which supports bridging in-room and personal headphone monitoring with maximal accuracy. It also offers full support for room adaption from the company's powerful Genelec Loudspeaker Manager (GLM) software.

Note: The 9401A is compatible with all Smart Active Monitors and Subwoofers (SAM) except the 8320A.

Multichannel AoIP Converter    16 Channels Digital Audio    Sources: ST2110, AES67, and Ravenna    Outputs: AES/EBU over DB25    Dedicated Subwoofer Output (AES)    Auxiliary Stereo Monitoring Output (AES)    Supports All Popular Immersive Formats    Fully Compatible with UNIO Platform    Supports SAM Monitoring systems    Supports GLM Software

• The 9401A enables the smooth integration of Smart Active Monitors and Subwoofers (SAM) into SAM system layouts, from stereo to immersive.
• Multiple SAM Subwoofers can be connected to extend low frequency output for LFE or flexible Bass Management.

• A single 9401A supports all popular immersive formats, such as 9.1.6.
• Using several 9401A units allows the channel count to be extended further, supporting even larger configurations, such as 22.2.

Related Questions and Answers

Q: 1. Hi my name is Hugh I have impro hd-388 ,micro phone GTDaudio G-788 ,the mixer pro FX12 12 channels professional effects mixer and 2 EON 615 JBL speakers build in amplifier 1000w can I use this and my sounds will much better?

A: The DriveRack PA2 can be connected between your mixer and speakers. The unit offers crossover functionality, room correction EQ as well as compression and limiting for more control and better overall sound.

Q: 2. Is it EU version (220-240 VAC)?

A: DriveRack PA2.US version 120 V-50-60 Hz

Q: 3. I already have a calibrated measurement microphone. Is the dbx branded mic the only one that will work with this unit?

A: The dbx RTA-M microphone is not required and it is possible to use a different calibrated measurement microphone with the dbx DriveRack PA2 Complete Loudspeaker Management System. In the Wizard options menu, for the Mic Response setting, simply select the FLAT option when using a measurement microphone other than the dbx RTA-M. When the RTA-M is used and it is selected as the option for the Mic Response setting, the system's AutoEQ automatically compensates for the frequency response of the RTA-M mic to provide accurate results.

Q: 4. Can I configure it with WiFi?

A: By connecting a wireless router to the ethernet port on the back of this device, you can create a wifi network and control it via an iOS or Android app.

Q: 5. What could be the solution to my dbx driverack which always go blank sometimes?

A: Check all connections, including the electrical cable and wall socket or the rack's electrical supply.

Q: 6. do you have a management system that can hold 100 keys?

A: We do not offer a larger key management system.

Q: 7. Can I connect my laptop directly to the DriveRack PA2 to use the controls or do I have to be wireless through an app?

A: A microphone is connected directly to the dbx unit and the controls are accessed via the Ethernet control via the app.Please contact dbx Technical Support Department at (801) 566-8800 or visit a href= http://www.dbxpro.com. target= _blank www.dbxpro.com./a for detailed installation/operation assistance.

Q: 8. Hello, I have a question to make purchase dbx DriveRack PA2 Complete Loudspeaker Management System is included RTA-M Microphone for free?

A: RTA microphone not included

Q: 9. Can I connect an amp for full range speakers to high and another amp to low for a sub, then set it to cross over appropriately?

A: This unit allows single, bi or tri-amped configurations.

Q: 10. my dbx driberack screen is blank sometimes it will come up but not always. Pls what could be the solution

A: Check all connections and then check them again. Swap out cables if necessary.If you are confident your connections are not the issue, then perform:Factory Reset:The Factory Reset function resets all user presets and Utility settings in the PA2 back to their factory default state.WARNING! Performing the Factory Reset procedure will permanently reset all user presets and set all PA2 settings back to their factory default state. This operation is irreversible.To perform a Factory Reset:1. Power down the DriveRack PA2.2. Press and hold the STORE button then apply power to the DriveRack PA2. Keep the button pressed until the FACTORYRESET Release STORE button message appears in the LCD display then release the STORE button.3. Press the WIZARD button to perform the Factory Reset procedure. Press the STORE button to cancel the operation.Soft Reset:The Soft Reset function resets all Utility settings in the DriveRack PA2 back to their factory default state without resetting user presets.To perform a Soft Reset:1. Power down the DriveRack PA2.2. Press and hold the UTILITY button then apply power to the DriveRack PA2. Keep the button pressed until the SOFT RESETRelease UTILITY button message appears in the LCD display then release the UTILITY button.3. Press the WIZARD button to perform the Soft Reset procedure. Press the UTILITY button to cancel the operation.