Add shoulder support and a 15mm LWS rod system to your Sony VENICE 2 camera with this Chrosziel Cage Kit for Sony BURANO Cinema Camerafrom Chrosziel. The support features a built-in shoulder pad and a V-lock base to mount on a separately available V-lock mount, or you can utilize the included tripod adapter plate to add tripod mounting thread options.

Two 15mm rods are included to add a separately available follow focus motor, matte box, or other accessories to your VENICE 2, and you can add optional rods to the back of the support using a separately available rod clamp. There are also two ARRI-style rosettes on either side so you can add handgrips or extension arms to your rig.

Shoulder Support with Pad and 15mm Rods    Top Plate with 15mm Rods    Right and Left Front Brackets    Rear Right Bracket    Numerous Accessory Mounting Options

Related Questions and Answers

Q: 1. Are there any ways to add counter-weight to this rig, for stabilization?

A: Depending on the rig you choose, you could add either our regular counter weight or our base counter weight with rod bloc. I hope this answer your question!

Q: 2. Hi, Can the SMAD P3 mic interface be used with this? Thanks in adavance.

A: There is plenty of room for the Sony SMAD-P3. You will not, however, be able to mount the handle in the usual position.

Q: 3. Will the SmallRig Manfrotto 501PL-Type Quick Release Plate be compatible with this cage?

A: Following is a list of confirmed and tested cages that are compatible with the SmallRig plate: BMPCC 4K/6K cage (2203) Nikon Z6 cage (2243) Sony a7R III cage (2087) Sony a6100/a6300/a6500 cage (CCS231)

Q: 4. Does this rig also fit the original a7s model?

A: Sorry, but products for Sony's A7S II/a7R II/a7 II are not compatible with the original A7S model. The a7s is 127 x 94 x 48 mm is and the others are 127 x 96 x 60 mm so the cage will not fit on that alone. Also the HDMI and microphone connectors are not in the same place, so the cage for the new a7S II will block access to the connectors of the original a7S model. We can suggest this answer, the SHAPE Sony a7S Kit plus the other items to fill out the kit. Please see below.

Q: 5. is this compatible with the a7iii?

A: Manufacturer explicitly defines compatibility to be exclusive to the Sony a7S III mirrorless camera.

Q: 6. does it works for the URSA mini? thanks

A: Generally, there is a lag time from when a new camera is released and when 3rd party manufacturers can release corresponding products that match. At this time, Chroszeil has not listed a kit specifically for the Blackmagic Mini. So while I would say that the Chrosziel 450-R2 Matte Box and Follow Focus Kit for Blackmagic Cinema Camera & Production Camera 4K probably will work for the Mini, I cannot say that it will work without issue. My concern is will the base be the right height since the matte box is not height adjustable. We will not know for sure until Chroszeil has an opportunity to test the arrangement.

Q: 7. What are the two small silver posts on the bottom right?

A: The SmallRig Full Camera Cage Kit for Sony a6700 has a HDMI cable clamp which secures the cables connected to your Sony A6700 while it is in the cage. The silver screws tighten and adjust the HDMI clamp.

Q: 8. Can the above Chrosziel 450-R2 Matte Box and Follow Focus Kit be used for the Canon c300?

A: This Chrosziel kit is made for the Blackmagic 2.5 and 4k Cinema Cameras, it will not work with the C300. However Chrosziel does have some kits with a matte box for the C300 and you could add a variety of different follow focus systems to that rig.

Q: 9. is this compatible with the Zeiss CP2 lenses?

A: This is compatible with all CP.2 lenses with the exception of the CP.2 50 mm/T2.1 Macro which has a front diameter of 134mm.

Q: 10. Is it possible to hold camera on tripod vertically to shoot as mobile mode with this plate ?

A: No, the following item is just a base plate.