The black PSM1 Omni Headset Microphone for Audio-Technica Transmittersis designed to deliver clear speech and vocals for presenters and performers in a low-profile form factor. The cost-effective headset uses dual ear hooks to provide a stable and secure wearing experience, while the headband can be adjusted to suit various head sizes and shapes. The microphone features a forgiving omnidirectional pickup pattern and is attached to an adjustable boom that allows for quick and easy positioning for optimal sound quality.

The PSM1 features an electret-condenser mic capsule that can handle SPLs up to 135 dB and delivers a 20 Hz to 20 kHz frequency response for clear, intelligible speech. A foam windscreen, adjustment wrench, and leather storage case are also included.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    For Select Audio-Technica Transmitters    Adjustable Boom for Mic Positioning    Handles SPLs up to 135 dB    Dual Ear Hook Headset    Includes Two Detachable Cables    Includes Windscreen & Adjustment Wrench    Includes Storage Case, Folds Flat

• Transmitter Compatibility: hardwired to work with Audio-Technica wireless transmitters equipped with a cW-style Hirose connector.

  Related Questions and Answers

  Q: 1. Do you sell replacement elastic for this shockmount? After 5 years mine is worn out.

  A: Unfortunately we do not. Try contacting Rode.

  Q: 2. I just bought a Panasonic HC-X2000, Will this mic work well with it comparing with some expensive ones?

  A: Yes the Audio-Technica AT875R is directly compatible with the Panasonic HC-X2000 camera and will work well with it. If you want to fit the AT875R into the shotgun mic holder on the HC-X2000, you will need B&H # SAROCS.

  Q: 3. Will an Audio Technica 2500 fit in this? Thank you.

  A: For the ATR2500-USB microphone, the correct shockmount is linked below:a href= http://www.bhphotovideo.com/c/product/1075694-REG/auray_shm_scm1_shock_mount_for_condenser.html/pageID/accessory target= _blank http://www.bhphotovideo.com/c/product/1075694-REG/auray_shm_scm1_shock_mount_for_condenser.html/pageID/accessory/aIf you meant the AE2500 kick drum mic, you would need the 8471 clamp instead.a href= http://www.bhphotovideo.com/c/product/352412-REG/Audio_Technica_AT8471_8471_Isolation_Clamp.html/pageID/accessory target= _blank http://www.bhphotovideo.com/c/product/352412-REG/Audio_Technica_AT8471_8471_Isolation_Clamp.html/pageID/accessory/a

  Q: 4. Will fit Samson G Track Pro?

  A: No. You want the Samson SP04. https://www.bhphotovideo.com/c/product/1434449-REG/samson_sasp04tb_sp04_spider_shock_mount.html

  Q: 5. Will this fit an Electrovoice RE320 (or RE20)?

  A: No, it will not. The mics that this is compatible with have a removable nut at the bottom of the mic that attach them to the shockmount. For the RE-20 you will want to use either the Auray SSM-BC10 or the EV 309A https://www.bhphotovideo.com/c/product/1075015-REG/auray_ssm_bc10_suspension_shock_mount.html https://www.bhphotovideo.com/c/product/76703-REG/Electro_Voice_3091965_309A_Suspension_Microphone_Shock.html

  Q: 6. So this is or is not compatible with the Rode NT-USB?

  A: It is not compatible with the NT-USB. It is compatible with the Rode Podcaster and Procaster Microphone.

  Q: 7. Does the 1/8" connection also provide phantom power? Or is it only through the XLR cable?

  A: When using the Audio-Technica AT8022 X/Y Stereo Phantom and Battery Powered Field Microphone with its XLR to 3.5mm TRS output cable, the microphone will not receive phantom power from the corresponding 3.5mm input connection. When used with this connection the AT8022 should be powered from its AA battery compartment.

  Q: 8. Will this fit an MXL BCD-1?

  A: I'm not sure that it will because the MXL-BCD-1 doesn't have a threaded end where the XLR cable plugs in. The way the mic is held into this mount is using a threaded washer. If you look at the Rode Procaster Mic (ROPROCASTER), you can see how there is a treaded washer at the end where you would mount into the shockmount. The BCD-1 has that additional bracket that almost replaces the need for a shockmount. Not sure this is the right product for the mic you have.

  Q: 9. I see that in the box, there are 2xO'Rings. What is it for?

  A: The O-rings are included to create a tight and secure fit around a mic like the Audio-Technica AT875R Short Shotgun Microphone when placing it in a camcorder's mic holder.

  Q: 10. Will this work with a Blue Yeti Blackout Edition Microphone?

  A: The Blue Yeti has a unique design that is only compatible with the Blue specially designed shockmount.