Designed for harsh environments, the Vivotek AW-IHB-1040 10-Port Gigabit PoE++ Industrial Switchcan operate IP cameras, access points, and other PoE compatible devices in temperatures ranging from -40 to 167°F. Two of the seven Gigabit-speed RJ45 ports provide 90W PoE++ while the remaining six deliver up to 30W with a total budget of 300W.

Two SFP ports are available for Gigabit fiber uplinks. The AW-IHB-1040 features a 20 Gb/s switching capacity and may be mounted onto a DIN-rail or wall with the included brackets and terminal blocks for power.

2 x Gigabit Ethernet PoE++ Ports (90W)    6 x Gigabit Ethernet PoE++ Ports (30W)    2 x Gigabit SFP Ports    20 Gb/s Switching Capacity    300W Power Budget    DIN-Rail Mounting

Related Questions and Answers

Q: 1. Your description says," 61MP Full-Frame Exmor R CMOS Sensor", yet your specifications say the camera has a 1/1.38" sensor ?

A: The Sony ILX-LR1 Industrial Camera is indeed a full frame sensor. This is a mistake and will be corrected.

Q: 2. Can this be used to connect a SanDisk Extreme SSD drive (USB-C) with a Thunderbolt 2 port on a Mis 2015 MacBook Pro.. will is handle the data trransfer and supply power to the external drive?

A: Yes, this dock can be used to connect a SanDisk Extreme Portable SSD to your computer.

Q: 3. Would love to use this camera for aerial photography. Do you have any information on drones that plan to integrate the camera?

A: The VT Naut from Aeromao already is integrating this camera into their drones.

Q: 4. What happens after the rated 500 recharges? Does the battery go dead and the device need to be replaced?

A: This is rated for up to 500 chargers. Once the battery dies on this unit you will need a new unit. Keep in mind this is replacing nearly 1000 cans of canned air.

Q: 5. Can GPS location data be integrated into the image files?

A: Yes, the Sony ILX-LR1 Industrial Camera will be able to link image IDs with drone position data in post-production. B&H Exlplora overview of the Sony ILX-LR1 camera: https://bit.ly/3QT6gZK

Q: 6. Will the Qumi Q6 fit in this particular box?

A: If that's the pocket projector that is 6.5 x 4 x 1.3 inches, then maybe. The interior dimensions of this case are 6.50 x 3.87 x 1.75 inches. The black rubber walls are flexible, so you may be able to squeeze it in. I would not suggest that though, I would get the 1050 or 1060 model. These are both slightly bigger which allow it to fit properly with added foam for protection.

Q: 7. Does this camera record gyroscopic/telemetry data into the video metadata?

A: Unfortunately, it is not possible to record Gyroscopic, or Telemetry data for Video Metadata when using the Sony ILX-LR1 Industrial Camera.

Q: 8. Can it be use on transparencies and film before scanning ?

A: Yes, the Canless Air System O2 Hurricane can be used for negative film or transparencies prior to scanning.

Q: 9. Can Gossen MAVOSPEC measures flash light?

A: Hi,The Mavospec cannot measure flash light in a proper way, due to the long integration time. However it's capable of providing spectral data for the flash light.Normally when measuring flash light, the aim is to set a proper exposure for the cameras. For this, the Mavospec is useless.For this purpose, use e. g. a Seconic exposure meter.Tore

Q: 10. What is the center thread size?

A: OConnor does not list the thread size of the OConnor Mitchell Base for 1040/2560/2575 Heads, but a compatible tie down is the OConnor Mitchell Tie-Down for Mitchell Base 08281 and C1225-1011, BH #OCC12341018.