Ms-6U1Cp Usb-C 12V Power Extender Set

Ms-6u1cp Usb-c 12v Power Extender Set

Product Code: eq152587
Availability: In Stock

$1,746.00 $2,322.18

Qty

20 reviews Write a review

Description
Reviews (20)

Extend USB-C signals and power up to 328' using Catx cables with the MS-6U1CP USB-C 12V Power Extender Setfrom MSolutions. With data rates of up to 320 Mb/s, this set may be used with USB-C PTZ cameras, hard drives, laptops, and other compatible peripherals. Also featured is RS-232 serial passthrough, 12V PoC (Power over Cable) from the host side to supply 12V/2A of DC power for connected equipment on the device side, and micro-USB ports for firmware updates and control.

Extend USB-C Connections up to 328' USB-C, RJ45, and Micro-USB Connectivity Signal Extension via Catx Cable Bi-Directional RS-232 Serial Passthrough Data Transfers up to 320 Mb/s Bi-Directional 12V PoC

Key Specs
Maximum Range	109.4 yd / 100 m
Receiver I/O	1x USB-C (3.0 / 3.1/3.2 Gen 1) Output 1x RJ45 (RS-232) Output 1x RJ45 Output
Transmitter I/O	1x USB-C (3.0 / 3.1/3.2 Gen 1) Input 1x RJ45 (RS-232) Input 1x RJ45 Input
Power Source	Power Adapter
Parameters
Receiver I/O	1x USB-C (3.0 / 3.1/3.2 Gen 1) Output 1x RJ45 (RS-232) Output 1x RJ45 Output
Transmitter I/O	1x USB-C (3.0 / 3.1/3.2 Gen 1) Input 1x RJ45 (RS-232) Input 1x RJ45 Input
Maximum Number of Devices	2
Power
Power Source	Power Adapter
Power Connector	Unspecified Size Barrel
DC Input Power	12 VDC at 2 A
Power Consumption	4.5 W
Environmental
Operating Humidity	0 to 80% ()
Operating Temperature	32 to 118°F / 0 to 48°C
Storage Temperature	-4 to 140°F / -20 to 60°C
Physical
Dimensions	2.4 x 1.0 x 3.1" / 60.0 x 25.0 x 80.0 mm Each
Weight	Each: 3.5 oz / 0.1 kg
Packaging Info
Package Weight	1.175 lb
Box Dimensions (LxWxH)	7.3 x 5.7 x 3.4"

Solves the challenge of extending USB camera data and power over a single category cable up to 328'

12V output on Device side for remote powering of connected VC equipment (or PoC to the TX if power to the VC device is not required)

One USB-C channel for up to 320 Mb/s data connectivity of USB-C devices across the link

Flexible USB extension for USB-C PTZ cameras, hard drives, laptops, and other USB-C peripherals

Bi-directional RS-232 serial pass through

Bi-directional 12V PoC (Power over Cable)

Related Questions and Answers

Q: 1. Does this fit the Blackmagic Design Production Camera 4k?

A: Yes, this fits the Blackmagic Design Production Camera 4K.

Q: 2. Does this fit an Atomos Ninja V battery eliminator ? the voltage is compatible. I just want to know if it will hook up to it. I'm having a hard time finding the Atomos version of this - This one looks identical - I cant tell from a picture if the actual screw-in locking connector is the same fit & thread though. Thanks. Will buy if so.

A: We would recommend using the Atomos version (ATOMPWR012), which is tried and tested and has the exact voltage specs for the Ninja V.

Q: 3. Does this power supply work for the mini converters & Hyperdeck shuttles?

A: Not for the mini converters or Hyper Deck. This PS is for monitors and the Smart Scopes.You are looking for this:B&H # BLPSMC MFR # PSUPPLY-INT12V10WCheers,Steve

Q: 4. Does it work with the Blackmagic Micro Studio Camera 4k?

A: Yes, it works with that camera.

Q: 5. Will this PS work with the BM Smartview HD?

A: Yes, this power supply will work with the SmartView HD.

Q: 6. Does this Power Supply work with Blackmagic Studio Camera 4k ?

A: No, the Blackmagic Design 12V Locking Power Supply (12W) is not compatible with the Blackmagic Studio Camera 4K.

Q: 7. Could this power the Red Komodo?

A: It should work according to published specs, but we have not tested this particular combination.

Q: 8. Is this compatible with the Blackmagic Production Camera 4k?

A: No, the Blackmagic Design Power Supply 12V12W Locking Converters is not compatible with the Blackmagic Production Camera 4k.

Q: 9. Will this work with the watson AA 8 bay charger?

A: Yes, the Watson Pro 12V 2A Power Supply (2.1mm) has been confirmed to work with the Watson 8-Bay Rapid Charger for AA / AAA NiMH or NiCd Rechargeable Batteries.

Q: 10. Would this work for the ATEM Mini Pro?

A: The correct power supply is this. Blackmagic Design International Power Supply for Video Assist 12G (12 VDC, 36W) BH #BLPWRSPVA12G • MFR #PSUPPLY-12V36WLOCK

Harry	21/09/2024
[4.5 W] Save your batteries and purchase this adapter for the Yn-216 Led light. 5

MATTHEW	16/09/2024
[Power Adapter] Needed this for my 24 inch Apex LED/LCD tv because the mfg. never called me back from India.I called B&H and even though shipping cost more than item it was worth it. I plugged it in and a few seconds later it worked. Tv is back to normal considering it goes through adapters every 1 to 2 yrs. Its 2amp 0.6amp output 5

Paul Ruggieri	22/08/2024
[Power Adapter] I am using the 12v, 5A Fujiya AC adapter with my Luxli Cello light. I am so glad I have it and don't need to worry about batteries when I use the light on a stand. 5

Anonymous	19/08/2024
[4.5 W] I just got it, so I've only used it once. It does work as it's supposed to :) 5

James	09/08/2024
[12 VDC at 2 A] Great product, and it showed up relatively quickly. I would highly recommend purchasing from this store again! 5

Don	16/07/2024
[12 VDC at 2 A] I use it to power a Lumix BGH1 camera. 5

Don	15/07/2024
[12 VDC at 2 A] Beyond the less than high tech act of plugging it in. It does what it said it would do. As noted in other ratings the extra length of the cord is a real convenience. I have a caution that I use for myself, 12 volts x 10 amps = 120 watts. The sum of all device wattages plugged in should be less than 120 watts. This is not a criticism of the power supply. It's simply a safety check . 5

Ernest	16/06/2024
[2] Works as it should. Also works on devices requiring 2A. 5

Richard	11/06/2024
[Power Adapter] I like that it has long enough cords that helps to isolate it from other sensitive electronic equipment and reduce/eliminate RFI. 5