Connect up to four 8K HDR sources and route these to a single display with this WyreStorm 8K60 HDMI Switcher with Dolby Vision, HDR, ARCfrom WyreStorm, a powerful plug-and-play device with up to 40 Gb/s HDMI support and audio de-embedding with ARC support. Without requiring manual intervention, the switcher can perform auto switching and is equipped with signal compensation, which allows users to employ optional extenders or splitters without signal degradation or delay. The switcher is compatible with HDR10, HLG, and Dolby Vision, in addition to being HDCP 2.3 compliant. The unit's sleek design allows flexible placement, and two included mounting brackets facilitate rack mounting.

Plug-and-Play 4x1 HDMI Switcher    Up to 8K HDMI Input/Output    Supports HDR10, HLG, and Dolby Vision    EDID, CEC, HDCP 2.3 Compliant    Up to 40 Gb/s Data Rate via DSC    Auto or Manual Switching    Includes Mounting Brackets

Connect up to four 8K HDR sources and route these to a single display with this 8K60 4x1 HDMI Switcher with Dolby Vision, HDR, ARC, Audio De-Embed, EDID Management, RS-232 Control from WyreStorm, a powerful plug-and-play device with up to 40 Gb/s HDMI support and audio de-embedding with ARC support. Without requiring manual intervention, the switcher can perform auto switching and is equipped with signal compensation, which allows users to employ optional extenders or splitters without signal degradation or delay. The switcher is compatible with HDR10, HLG, and Dolby Vision, in addition to being HDCP 2.3 compliant. The unit's sleek design allows flexible placement, and two included mounting brackets facilitate rack mounting.

Related Questions and Answers

Q: 1. Is there a delay between switching inputs? I want to use this as a video switcher for a livestream and a lot have a black screen for a few seconds while switching sources.

A: Yes, there is a delay consisting of a few seconds when switching between sources. Additionally, you must scroll through the sources (you can not jump from source 1 to source 4 in a one-click/button fashion. I use this device in front of a professional HDMI switcher (Roland V1-HD) if more than 4 cameras are required and a delay can be allowed between transitions of cameras behind the 5in1 (while the transition delay is occurring another camera from the remaining three HDMI ports is on.)- Jack

Q: 2. Can I use this switchers with OBS to switch between my dslr cameras?

A: No. This switcher works as a selector. The input you choose is the one that is send, but if you switch from one input to another, the switching is not seamless and will probably give you a second of black in between. OBS will not control this unit.

Q: 3. Can you switch the inputs at the box? Can you see which input is selected on the front panel? (There is no photo of the front panel)

A: Yes, you can. Or I prefer to use the IR remote. And I know that 1 is the cable TV and 2 is the computer so I don't ever need to look. But there is a blue LED light on the top of the switch that lights up next to whichever switch is activated.

Q: 4. Do all the inputs need to have the same resolution?

A: No. Each input can be different

Q: 5. Did you notice a delay when switching between inputs?

A: There is a very short delay about 1 second. Hope this helps!

Q: 6. Does this product allow to control video wall? (to show one image splitted on 4 motitors) Or it only shows the same image on al

A: The Gefen UHD 4K 600 MHz 1x4 HDMI Splitter with HDR Support (4K, 60 Hz, 4:4:4) does not have any video wall features at this time.

Q: 7. Does the remote toggle the inputs in sequence, or can you select a specific source?

A: According to KanexPro the included remote has buttons for the 5 inputs on it to select from.

Q: 8. I have a receiver setup of 5.1.4 Atmos. What will happen to the audio signal when passing through this device on a movie that contains atmos. I noticed that the device only supports 7.1.?

A: This supports up to 7.1 channels, which would tend to mean it will support lower options as well. It should work fine with the Atmos you have.

Q: 9. can I switch 2 hdmi camera outputs 1080 to a single reference monitor?

A: Yes, the KanexPro 3x1 HDMI Switcher with 4K Support can switch between any amount of the 3 inputs available to a single reference monitor.

Q: 10. Can I connect Google Chromecast (hdmi dongle) to this device with the intent of sending the hdmi output to a projector AND then going toslink/digital audio out to an audio receiver?

A: The quick answer is yes.... However if your only use is to bring in 1 HDMI source and go to toslink then there are other products that will also work, if you are bringing in multiple sources and sending them to your projector and audio system then this is a great box...