Turn one outlet into ten with the black Watson 10-Outlet Surge Protector with USB, 2450 Joules, Blackfrom Watson, which features ten NEMA 5-15R outlets, each of which provides up to 2450 joules of surge protection, and two of which are block-sized to accommodate large plugs without blocking access to other outlets. A 15A circuit helps protect devices such as computers, TVs, and mobile electronics, while two USB-A ports, one of which provides quick charging, and two USB-C ports with power delivery lets you charge devices with 5V/3A or up to 20W of power.

This surge protector connects to a wall outlet using an integrated NEMA 5-15P plug and a 6' cord. The plug is equipped with a right-angle connector that is oriented at a 45° offset, which does not block any wall outlets below. LED indicators alert users as to which surge circuits are properly functioning and rear wall mounts allow the surge protector to be mounted off the ground. In the event that properly connected equipment is damaged during a surge, Watson provides a connected equipment guarantee of up to $300,000.

10 x NEMA 5-15R Outlets (2 Block Sized)    2 x USB-C Charging Ports    2 x USB-A Charging Ports    NEMA 5-15P Right-Angle Plug (6' Cord)    2450 Joules of Surge Protection    Rear Wall Mounts    LED Indicator for Surge Circuits    Input: 125 VAC @ 60 Hz    15A Rated Current    1875W Max Wattage

Watson's 10-Outlet Surge Protector with USB adds ten NEMA outlets, two USB-A ports, and two USB-C ports for all your electronics in the home and office. If you have a lot of gear, you can now power your large devices like a computer and TV from the outlets, and mobile electronics like your phone or tablet from the USB ports. All ports are protected with safety circuits that monitor power surges from overcurrent and overloading power amounts.

There are four USB ports so you can charge USB devices. One USB-A and a USB-C port output 5V/3A, which is ideal for your phone and wireless earbuds. The two additional USB-A and USB-C ports accommodate QC and PD devices, delivering up to 20W to quickly charge devices at high speed.

The outlets are protected by up to 2450 joules of surging power. An LED indicator displays the working surge circuits so you can easily glance at the outlets to see that your gear is protected.

Watson covers your equipment during power surges and disturbances due to lightning and power grid fluctuations. Up to $300,000 for connected equipment. Whether you're working on your equipment or away from it, you don't have to worry when the weather changes for the worse or the utility company can't handle the power.

Sometimes the wall outlet isn't close to the equipment and the placement of a surge protector can be an eye sore. This multi-outlet unit offers a 6' power cord with a right-angle connector. Plug the protector behind the desk or nightstand with it flush against the wall and power up your electronics on the other side of the worktable.

The rear wall mounts allow you to mount the surge protector off the ground and with better access. With the outlets on the wall, you won't have to bend down and rummage through a mess of wires to plug and unplug your gear.

• USB-A 5V, 3A
• USB-A QC 3.0 5V, 3A / 9V, 2.22A / 12V, 1.67A
• USB-C 5V, 3A
• USB-C PD (PPS) 20W, 5V, 3A / 9V, 2.22A / 12V, 1.67A

Related Questions and Answers

Q: 1. It looks like the protector case would interfere with the optional thumb support. Is this correct?

A: Not correct. You can use the protector with the thumb support. It will not interfere with the protector as it was designed to use it mind.

Q: 2. It comes with no instructions. I need it for a 4 to 24v load. Does the hot for this load go on the left or the right?

A: AC does not make a difference which is which. You can go either way.

Q: 3. On the rear of the unit there is print stating that this thing is supposed to work with both US and European AC power, how is that possible? But if it indeed does, do you have to switch out the fuse inside it, and what fuse would you need for 120 Volts and for 230 Volts?

A: There are many products today which have an automatic power conversion adaptor built into the input stage of the power converter. It is common for laptop as well as tower-type computers to have a/c input which looks for the input a/c voltage, and depending on the reading, the power supply converts the a/c source to the proper circuit in order to arrive at the proper d/c conversion.In a unit such as this, there is no d/c conversion. It is essentially just a multiple a/c power strip with individual switches which are tied into led lights. The product is rated for 230volts a/c, which is the highest a/c power source that one may find. Any a/c power level below that will be handled because the unit is rated for 230 volts a/c. Many multiple-outlet power strips can be used with European 230 volts a/c supply. They will pass the a/c voltage just fine, if their breaker or fuse is rated for 230 volts a/c. The only difference when using such a product as this in the USA, or in Europe is the need to choose the proper plug to get the power cord to mate with the supplied a/c outlet. This is my understanding of how units like this can be made to function across a variety of a/c input voltages from 100 volts to 230 volts, and not require modification.

Q: 4. Is this charger compatible with the GoPro Hero 10 Enduro batteries?

A: Yes, this will charge the GoPro Hero 10 Enduro batteries.

Q: 5. Will it work for GoPro 11?

A: The Watson Lithium-Ion Battery Pack for GoPro HERO9/10 Black (3.85V, 1720mAh) will work for the GoPro Hero 11.

Q: 6. i HAVE THE PC CABLE FROM UPS TO PC, HOW DO I DISPLAY INFO ON PC?

A: To display the info of the APC Back-UPS Pro BN1050M Surge Protector & Battery Backup on your PC... 1. On the computer, go to www.apc.com. 2. Search for “PowerChute Personal Edition” then click on “View Details” to download the latest version of PCPE software. 3. Click the download link and select Software product. 4. Select the appropriate operating system. 5. Follow directions to download the software.

Q: 7. What is the voltage protection rating on the isolator? i.e 500V? Thanks

A: The DigitalFoto Solution Limited KO-10 SDI Protector & Galvanic Isolator for RED KOMODO has a voltage protection with this cable is up to 30v.

Q: 8. Does this unit provide "pure sine wave" or is it "simulated sine wave"?

A: The APC Back-UPS Pro BR 1000VA Battery Backup & Surge Protector BH #APBR1000MS is pure sine wave.

Q: 9. Can this be left plugged into the cameras sdi port when not connected to an external device like a monitor?

A: Sure, you could leave the DigitalFoto Solution Limited KO-10 SDI Protector & Galvanic Isolator for RED KOMODO (7.9", Black) connected even when it's not in uses if you'd like, though it may be a nit of a nuisance if it is not strapped down.

Q: 10. Will the Leica Strap with ring protectors fit? Strap: https://www.bhphotovideo.com/c/product/1296572-REG/leica_18575_leather_carrying_strap_black.html

A: The case is designed and made only for the Leica Q2 Digital Camera "only"