You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Godox Ivm-s2 Shotgun Microphone For Cameras

Godox Ivm-s2 Shotgun Microphone For Cameras
  • Product Code: eq153045
  • Availability: In Stock

$117.00 $174.33

With a compact, lightweight form factor, the Godox IVM-S2 Shotgun Microphone for Camerasis ideal for the vlogger, run-and-gun shooter, or mobile journalist capturing audio with their camera or compatible mobile device on-the-go. The shotgun microphone captures audio in a cardioid pickup pattern to eliminate disturbances from behind the camera. It also features two low-cut filters at 75 and 150 Hz to reduce unwanted low-frequency noise from air conditioners or traffic.

Adjust the three levels of gain using the onboard controls. AN integrated shockmount prevents jostling from affecting your recording while also allowing you to mount the microphone onto your camera or smartphone gimbal. Two included cables—one 3.5mm TRS and one 3.5mm TRS to TRRS—make the microphone compatible with DSLR/mirrorless cameras and smartphones with a 3.5mm port. The microphone runs on a single AA battery for more than 500 hours ensuring an ultra-long battery life.

Open Box Products Have a Limited 1-Year Manufacturer Warranty    Vlogger, Run & Gun, Mobile Journalist    For Cameras and Mobile Devices    Cardioid Pickup Pattern    3.5mm TRS Audio Output    Low-Cut Filter, 3-Level Gain Control    Integrated Shockmount, Long Battery Life

Key Specs
Element TypeNo Element/Capsule Included
Polar PatternCardioid
ControlsGain/Sensitivity, Low Cut/HPF
Frequency Response20 Hz to 18 kHz
Maximum SPL110 dB
Analog Output1x 1/8" / 3.5 mm TRS
Power SourcesBattery
Microphone
Sound FieldMono
Element TypeNo Element/Capsule Included
Polar PatternCardioid
OrientationEnd Address
CircuitrySolid-State
High-Pass FilterNo
Filter & EQLow-Cut Filter: 75 Hz / 150 Hz
Gain Adjustment-10 dB / +10 dB
ControlsGain/Sensitivity, Low Cut/HPF
Performance
Frequency Response20 Hz to 18 kHz
Maximum SPL110 dB
Connectivity
Analog Output1x 1/8" / 3.5 mm TRS
Power
Power SourcesBattery
Operating VoltageNot Specified by Manufacturer
Battery Type1x AA (Not Included)
Physical
ColorBlack
Mounting Thread Size1/4"-20 Female in Cold Shoe
DimensionsH: 3.1 x W: 2.8 x L: 1.9" / H: 77.5 x W: 70.5 x L: 48.7 mm
Weight2.4 oz / 67 g
Packaging Info
Package Weight0.295 lb
Box Dimensions (LxWxH)5.3 x 4.2 x 2.3"

  • 75 and 150 Hz low-cut filters
  • -10, 0, and +10 dB gain levels
  • Integrated shockmount with cold shoe and 1/4"-20 thread
  • Included foam windscreen, 3.5mm TRS cable, 3.5mm TRS to TRRS cable
  • Powered via AA battery for 500+ hours
  • Related Questions and Answers

    Q: 1. will it hold 2 ad200 pro?

    A: The Godox S2 Speedlite Bracket for Bowens will only accommodate one (1) Godox AD200Pro TTL Pocket Flash at a time. If you need to use two (2) Godox AD200Pro TTL Pocket Flashes at once, I would instead recommend the Godox Dual Power Flash Bracket for AD200, B&H # GOADB2, for your usage needs.

    Q: 2. will this fit the forza 60? i've asked before and got two contradicting answers! so which is it?! yes or no?!

    A: No, the following unit will not adapt as it does not provide a secure fit.

    Q: 3. What size umbrella shaft does this fit? 7mm or 8mm?

    A: 8 mm

    Q: 4. Will this work with canon speedlites?

    A: Yes. The following unit will support both square and circle dedicated flash heads units.

    Q: 5. Will this fit my Intellytech Pocket Cannon Mini (Daylight)

    A: No, the Godox S2 is too small to work with the Intellytech Pocket Cannon Mini (Daylight).

    Q: 6. will the s2 godox speedlite bracket support the AD 100 pocket flash?

    A: Yes, the Godox S2 Speedlite Bracket for Bowens is compatible for use with the Godox AD100pro Pocket Flash.

    Q: 7. Will this fit two standard sized speedlights? I see the picture has 2 mounted, but they appear smaller. I own two Canon 600ex rt speedlights.

    A: No, the Godox S2 Speedlite Bracket for Bowens is not large enough for two Canon 600EX-RT Speedlites.

    Q: 8. Does anyone know what the exact inner diameter is? I have a specific bulb with a 9.2cm diameter so just want to check if it'll possibly fit. Cheers all.

    A: Unfortunately, I could not find measurement information from Godox for this Godox S2 Speedlite Bracket for Bowens. However, Raymond's measurements of 2.5 inches (6.35 cm) from top to bottom when fully opened and 2.875 inches (7.30 cm) wide would be correct.

    Q: 9. Is this compatible with the Sony GN60 flash?

    A: The Godox S2 Speedlite Bracket for Bowens can work with most shoe mount flashes including the Sony HVL-F60RM2 Wireless Radio Flash.

    Q: 10. does the tilt function have teeth or is it an endlessly fluid motion?

    A: The Godox S2 Speedlite Bracket for Bowens (B&H# GOS2) tilts forward and backward smoothly as it does not have the plastic "teeth" used to hold the previous version of this product at more limited and specific angles.

18/08/2024

[Mono] Godox has a winner here. All my speedlights and Godox AD200 fit in this very well. The Bowens mount has obvious use, but I also discovered that the disk fits my Impact softboxes and is much more sturdy than the speedlight mount that comes with the softboxes. I have two of these now. Outstanding!

5
05/08/2024

[Black] These are solid. worth every penny. I have 4 of these. Good metal and a big improvement over the last S Bowens mounts bracket. You'll feel that your flashes will never fall. I also like the umbrella mount. So if a good wind comes, if your outside taking photos, it does not take the setup down only the umbrella.

5
14/06/2024

[Solid-State] Works great with the Godox V1. The bottom clamp can be flat or rounded, depending on the type of flash you are using. This mount is strong and will definitely last a long time!

5
13/06/2024

[Battery] Perfectly accommodates speedlites. Stable and easily adjustable. Soft contact surfaces to protect your gear.

5
29/05/2024

[Mono] A very reasonable price for a quality-made piece of equipment. It does everything I need for supporting various speedlites up to a Godox AD200. The new features in the S2 were improvements that I am glad to have. I bought a second one ...

5
16/05/2024

[End Address] It's mostly plastic and some of the deep octas that I have are quite heavy. I was worried that the plastic would just snap off under the weight. Not an issue, these are very heavy duty brackets. After using the first one, I was confident enough to buy a second one. The diameter of the outer ring is 150mm which means that it fits SOME octas and folding beauty dishes perfectly - replacing the Bowens mount entirely. The only flaw that I can find is that the umbrella mount is a friction fit. It will be fine inside, but outside the slightest wind is going to slam that umbrella into the mount or whisk it away and put out someone's eye. Overall, it's very sturdy and well put together.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Godox S2 Speedlite Bracket Bowens Mount

$75.00 $95.25

Rode Ntg4 Shotgun Microphone For Professionals

$1,107.00 $1,671.57

Products You May Like

Heliopan 60mm Circular Polarizer Filter

$323.85 $511.68

Horita Csg-50rm Color Bar And Sync Generator

$1,980.75 $2,832.47

Global Truss Dt-f34 Spk/mt Speaker Mount

$441.00 $612.99