Miller Airv Fluid Head Solo-Q 75 Carbon Fiber Tripod Kit

Miller Airv Fluid Head Solo-q 75 Carbon Fiber Tripod Kit

Product Code: eq153258
Availability: In Stock

$5,137.02 $8,013.75

Qty

19 reviews Write a review

Description
Reviews (19)

The Miller AIRV Fluid Head Solo-Q 75 Carbon Fiber Tripod Kitfrom Miller AIRV Fluid Head Solo-Q 75 Carbon Fiber Tripod Kitis designed to accommodate a wide payload range with two selectable counterbalance positions and fixed pan/tilt drag. This head is rated to support camera setups from 4.4 to 11 lb, adequate for small cinema cameras, camcorders, or mirrorless rigs.

The sideload Versa quick release plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations, and it offers 3.9" of sliding range to balance your rig. To survive fast-paced shooting environments, it is die-cast from a lightweight yet durable metal alloy with composite polymers and precision ball bearings for smooth mechanical operation. The base of the AIRV is a 75mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the head in dark environments. A fixed-length pan handle is included, and a second rosette is available for attaching an optional second pan handle.

AIRV Fluid Head with Pan Handle Solo-Q 75 3-Stage Carbon Fiber Tripod Includes Pan Handle, Soft Carry Case 11 lb Maximum Payload

Key Specs
Camera Mounting Screw	1x 1/4"-20 Male 1x 3/8"-16 Male with Locating Pin
Camera Plate	Sideload Quick Release w/ Sliding Balance Plate: Versa Plate
Head Type	Fluid Head
Drag Control	Yes
Load Capacity	11 lb / 5 kg
Weight	3.1 lb / 1.4 kg
Camera Attachment
Camera Mounting Screw	1x 1/4"-20 Male 1x 3/8"-16 Male with Locating Pin
Camera Plate	Sideload Quick Release w/ Sliding Balance Plate: Versa Plate
Head
Head Type	Fluid Head
Base Mount	75 mm Half Ball
Counter Balance	Fixed
Head Dimensions	Base Diameter: 2.9" / 7.4 cm Height: 5.7" / 14.6 cm
Pan & Tilt
Drag Control	Yes
Independent Pan Lock	Yes
Independent Tilt Lock	Yes
Vertical Tilt	+90° to -75°
Lateral Tilt	No
General
Load Capacity	11 lb / 5 kg
Accessory Mounting	2x Pan Handle Fitting
Bubble Level	No
Weight	3.1 lb / 1.4 kg
Packaging Info
Package Weight	6.21 lb
Box Dimensions (LxWxH)	14.1 x 12.4 x 9.9"

Related Questions and Answers

Q: 1. Is the Sachtler Dolly 75 the only dolly compatible with this tripod system?

A: Yes, the Sachtler Dolly for the Sachtler 75/2 Mark II Aluminum Tripod System with Ace XL Head & Mid-Level Spreader is the following dolly model. Sachtler Dolly 75 for DA-75L, DA-75/2D, and Pedestal C I Tripods BH #SAD75 • MFR #7063 https://bhpho.to/4aC5dW4

Q: 2. Can you attach a 2nd pan bar to this new model?

A: The Sachtler 75/2 Mark II Carbon Fiber Tripod System with Ace XL Head & Mid-Level Spreader does not have a rosette in order to mount a second pan bar. The Sachtler 75/2 Mark II Carbon Fiber Tripod System with FSB 4 Fluid Head & Ground Spreader, BH #SA0381C, does have a second rosette which would allow for a 2nd pan bar.

Q: 3. Is it possible to move the pan bar to the other side of the head?

A: yes, please remove the Sachtler logo plate on the left side of the head

Q: 4. what are the dimensions of this tripod when completely compacted?

A: The closed length of Manfrotto 635 FAST Single Leg Carbon Fiber Tripod legs is 28.94". Manfrotto 504X Fluid Video Head with Flat Base is 4''Hight, combine together it has a total length of 32.94''.

Q: 5. Is quick release plate included in the box?

A: The Ace L Freddie Wong Edition Tripod System will include a quick release plate.

Q: 6. How long are the folded sticks when the head and bowl are removed? Fit in a 28 luggage?

A: I measured mine at 27.75.

Q: 7. What is minimum height of the tripod?

A: The minimum working height of the Manfrotto 504X Fluid Video Head & MVTTWINMA Aluminum Tripod with Mid-Level Spreader is 23 inches.

Q: 8. Do sachtler/manfrotto QR plates work with this head?

A: We're afraid not. This is compatible with Miller plates like BH #MI24CP. https://bhpho.to/2LTojyE

Q: 9. Is it easy to take the spreader off the legs?

A: yes, it is connected via rubber straps

Q: 10. Is the sliding plate on this tripod compatible with the regular Miller Air head?

A: No the Miller AIRV (VERSA) plate is not compatible with the Miller AIR head. However you could add the following Manfrotto Quick Release adapter to the plate of the AIR HEAD. The MA557 once attached to the Miller AIR Plate will accept Miller Versa plates from the AIRV head. Manfrotto 577 Rapid Connect Adapter with Sliding Mounting Plate (501PL) BH #MA577

Warwick	28/09/2024
[Fluid Head] This tripod system is excellent. I mainly shoot with a 5dmkII with rails, audio gear, follow focus, etc that totals to at least 20lbs and this tripod handles it all with ease. This is lightyears better than my previous Manfrotto tripods (which were also good...this is just much better). The head is solidly constructed and the fluid head is buttery. It extends as high as I will ever need (camera is well over my head, and I'm 6 foot), and the leg locking system is easy to use, even with a loaded tripod. Suprisingly solid for having no spreaders. 5

Engineer Mike	28/09/2024
[+90° to -75°] We had 5, bought 8 more. 5

Tboros	27/09/2024
[Fixed] this product ist for anbitional beginers & also for professionals ... 5

John S.	18/09/2024
[Fluid Head] Meets my needs perfectly. Great value for the price. 5

anyonymous	01/09/2024
[Yes] The DS-10 is light, the head action very smooth, the tripod is quick to set up and tear down. Let the legs out gently, though. One of the coolest things about the DS-10 is how low it goes: there's just enough clearance so the leveling handle isn't on the ground. In that configuration, it looks like a three-legged spider. So you can easily get extremely low shots on a fluid head, and the rubber feet let you stick it in the middle of a long, expensive board room table without leaving a mark. Lack of a spreader makes them hard to sandbag, which is where lightness can cause trouble. We've rented DS-20's as well. Bigger, heavier, not quite as flexible but able to handle larger loads. 5

Ruthacones	17/08/2024
[Yes] Im a local filmer from Port Macquarie, Australia and let me say that the DS-10 Aluminum Tripod System is by far the best tripod iv ever experienced with its super smooth pan you cant even screw up on purpose. I give the tripod 100% but I think a simple dolly should be included half price if the tripod exceeds a certain amount maybe? Food for thought. But I Thank you for creating such a prime product!!! 5

Ray Roman	11/08/2024
[+90° to -75°] This thing is a beast. I can't get over how well it's designed. I have Bogen tripods that are twice the weight and seem flimsy. This thing is light and solid as a rock. The head is smooth as silk. I originally ordered this tripod because of it's ability to set low to the ground (so I could use it with my Indislider), but now I am replacing all my Bogen tripods with this beast. Bogen = a piece of junk compared to this rig. Worth every penny, trust me. 5

J Boone	09/08/2024
[Yes] I bought this a few years back to use with my Panasonic HVX200a. Works like a dream. I do a lot of short form documentary production, and this Miller is perfect. The carbon fiber construction indeed makes the unit very light. I carried it while backpacking around Western Europe for a month, and it was fantastic. Very quick to setup and breakdown. I also like how low to the ground I can get with the concentric leg angle locks. The bag is very high quality as well. All around it is a very rugid product, which is perfect for my documentary productions. Those Australians can sure make a tripod. At this price point, this Miller is your best choice. 5