Print 3D models with the gray Dremel 1.75mm PLA Filament. PLA filament is made with polymerized lactic acid, which is extracted from corn, sugarcane, or other sugar-containing crops. In addition to being environmentally friendly, this filament also prints at low temperatures, which greatly helps to reduce the possibility of warping.

1.75mm Filament Diameter    PLA Material    For Dremel 3D40 and 3D45

Related Questions and Answers

Q: 1. In terms of lens compatibility, what's the minimum distance from the flange to the focus ring with this set up? I was thinking of purchasing the Meike MK 25mm F1.8 lens to use with this, but it's a fairly short and stubby lens.

A: The Ronin 3D Follow Focus is compatible with a majority of compact manual lenses. The distance from the flange to the focus ring is not important when performing the focus motor calibration. Focus the 3D Focus System on a person or large object in the center of the camera view that is approximately 1m away. Repeat the previous step with a person or large object that is approx. 4 m away

Q: 2. Does this monitor have 1/2' -20' screw holes on the sides and top as well?

A: No. It only lists a 1/4 20 mounting option on the bottom.

Q: 3. Is this monitor able to pass through a 3G 1080p50 level b signal? When I feed it a 1080p50 signal it outputs 1080psf25

A: While the FeelWorld LUT7S 7" 3D LUT 4K HDMI and SDI Monitor (B&H# FELUT7S) can accept a 1080p/50 3G-SDI Level B signal, it will not recreate the exact same signal to the single (not Dual-Link) 3G SDI out as the Level B input is split into two pseudo fields that would have to be reprocessed to be outputted again as a Level B signal. We recommend recording any desired 1080p 50/60 frame rate content prior to passing it through this monitor.

Q: 4. Can I just copy the recorded video files to a computer, DATA Bluray (NOT using editing software) or DATA DVD, pendrive or regular external hard drive, and be able to play the video in a computer with HDMI output connected to a regular 3D TV, and I will see the video 3D on TV? (with NO use of the camera!!)Or I'll need to edit and create SPECIAL BluRays to be able to see 3D without the camera?

A: According to Sony, you can create 3D Blu-ray discs so that you can view 3D movies without the camcorder.

Q: 5. does this monitor has cross convert between sdi and hdmi?

A: This does not offer SDI/HDMI Cross Conversion.

Q: 6. Can I use the monitor with only one NP-xxxx Sony type Battery or it requires two batteries to work? Thanks

A: The FeelWorld LUT7 7" 3D LUT 4K HDMI Monitor can be powered from a single battery.

Q: 7. What is the output latency from the SDI connection with a LUT applied?

A: Feelworld does not report the latency on their monitors. Typically monitors have less than 2 frames of latency.

Q: 8. does it let you go sdi in to hdmi out for video display to another unit?

A: Unfortunately it would only loop back through the SDI

Q: 9. Can I fit this inside an enclosure and use as an external drive?

A: Thin I meant to say

Q: 10. Are any LUTs pre-loaded? Does it come with s-LOG3?

A: The FeelWorld LUT7 7" 3D LUT 4K HDMI Monitor does not come preloaded. You load the LUTs via a SD card.