Mid49 Timecode Splitter Cable Straight 5 Inch

Product Code: eq153379
Availability: In Stock

$585.00 $754.65

Qty

17 reviews Write a review

Description
Reviews (17)

This MID49 Timecode Splitter Cable Straight 5 Inchis a 5"-long cable from MID49. It features a straight 0B5 LEMO connector to attach to your ARRI camera. The other end of the cable features two BNC connectors: one for timecode in and one for timecode out.

Breakout Box for 0B 5-Pin Splits 5-Pin Timecode LEMO into BNCs Separates BNC for Timecode In and Out Splits Timecode LEMO on ARRI Cameras

Parameters
Connector 1	1x LEMO 5-Pin Male
Connector 2	1x BNC Male 1x BNC Male
Cable Length	5 to 5" / 12.7 to 12.7 cm
Weight	1.5 oz / 42 g
Packaging Info
Package Weight	0.125 lb
Box Dimensions (LxWxH)	3.35 x 2.85 x 0.95"

Related Questions and Answers

Q: 1. What's the difference between this and the Sony VMC-BNCM1 cable?

A: The Deity Microphones C23 Timecode Cable uses a 3.5mm male timecode connector, while the Sony VMC-BNCM1 Timecode Adapter Cable has a BNC female timecode connector.

Q: 2. What cable is needed to connect this to both the FX9 and FX3?

A: A male-to-male BNC cable like the Pearstone 3' SDI Video Cable (BNC to BNC). See the link below: https://bhpho.to/2rqJug6

Q: 3. How long is this cable?

A: The length of the Deity Microphones C19 Timecode Cable for Canon R5 C Camera has not been specified by the manufacturer.

Q: 4. Would this cable work directly with the Atomos Ultrasync One? Or would an additional adapter be needed?

A: The Sony VMC-BNCM1 Timecode Adapter Cable would work directly with the Atomos UltraSync ONE's included Mini-DIN to BNC Cable to establish a timecode connection with the UltraSync.

Q: 5. Is there a VMC to 3. 5 mm TRS adapter that would allow a Tentacle device to jam sync an FX3?

A: In order to connect a Tentacle Sync timecode generator to the Sony FX3 Cinema Camera, you can use the Sony VMC-BNCM1 Timecode Adapter Cable together with the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06). There are no cables to connect from 3.5mm output on the timecode generator directly to the camera's Multi-Terminal USB connection.

Q: 6. Can this be used with the Rode Wireless Pro and an FX3. Does it have any timecode delay issues?

A: Yes, the Deity Microphones C23 Timecode Cable for Sony FX3 / FX30 Cameras should work without issue with the Rode Wireless PRO (Set to TC-only mode).

Q: 7. Does this work with the Sony a6700?

A: No, at the time of writing this response the Sony VMC-BNCM1 Timecode Adapter Cable is only compatible with the Sony FX3 and the FX30.

Q: 8. Anyone found a sleek and slim way to mount this securely to a cage, 1/4 20 screw in mount preferably?

A: Unfortunately, a dedicated compact mount has not been made for the Sony VMC-BNCM1 Timecode Adapter Cable with use on a cage. A possible consideration, if interested, is to use a zip tie holder with a 1/4"-20 opening to wrap around the timecode adapter.

Q: 9. work with sony fx6? for split handle and tilta r/s cable?

A: No, the Pluto Flash Splitter Cable is specific for the Pluto trigger system.

Q: 10. Does anyone know if this the adapter needed to jam timecode with firmware 3.0 on the A7SIII?

A: The Sony VMC-BNCM1 Timecode Adapter Cable with the latest firmware will work on the Sony a7s III to jam the timecode.

Darius	23/09/2024
[0.125 lb] Functions as it should. Solid purchase 5

Brian	22/09/2024
[0.125 lb] I purchased this to allow me to trigger two cameras simultaneously to do Stereo Views Photography. My shutter release cable only accommodates shooting with one camera so with the Flash Splitter cable, I was able to shoot both at the same time to capture a right and left image. This helps me to shoot moving objects such as people, animals, vehicles and motion in landscape views. This looks like a typical mini audio stereo cable but it actually is 2.55mm instead of the stereo 3.5mm. 5

Quinton	19/09/2024
[0.125 lb] Handy little cable, wouldn't be mad if the price came down though. 5

Dwane	03/09/2024
[0.125 lb] I love the centre screw for mounting hard up against cheese plate or rig. Holds it super secure. The case is really nice hard plastic too. Doesn't feel cheap. It's not a 3d printed part. Tested it running 3 devices from the one v mount. It's a tidy bit of kit. 5

Richard	28/08/2024
[0.125 lb] I'm not using this for flash. Instead I bought two generic universal bower camera triggers. They come with various attachments for triggering different cameras. The attachments use the 2.5mm style jacks. This splitter comes with the 2.5mm to 3.5mm adapters. This allowed me to use one trigger to fire to cameras at the same time. 5