The Gra-Vue XIO 9010DES-3U Composite to SDI Converteris a modular expansion board that fits the 3RU height version of the XIO frame. It converts analog composite video in the NTSC or PAL standard to SDI and features four SD-SDI outputs.

Supports NTSC or PAL Signals    10-Bit Internal Video Processing    Frame Sync Processing    Supports SNMP for Web-Based Management    For 3RU XIO Frame

Fame sync input allows you to sync the outgoing SDI signal to an external source, such as a house clock. Three modes supported: INT, single EXT, and global EXT, and can be set over XIO Net

10-bit internal processing

LED lights indicate the status of signals and power supply

Support SNMP, and can be managed and monitored in real-time using XIO NET

Video connectors may be hot-swapped

for use in broadcasting system, studios, and other professional video fields

Related Questions and Answers

Q: 1. Would this work with a projector I'm using it for Apple TV and cable box

A: If the projector has a composite video input, then I believe that it would.I used this device to connect an Apple TV to an older TV that does not have an HDMI input.

Q: 2. Will this work with a receiver that can only handle 1080p signals?

A: Yes it will. This converter has the ability to scale the image up to 3840 x 2160. However you can set it to upscale to only 1920 x 1080 if needed.

Q: 3. has anyone powered this unit with USB power instead of plugging it into the wall? Does it need to be plugged into the wall?

A: Hi Mark. The unit requires a 5 volt DC source at 2 amps. Any power supply of 5 volts DC with at least a 2 amp rating will power the unit. So, if you have a USB power supply of 5 volts that can supply the amp rating it should work. Please be aware of the polarity of the power supply you are using. And no, I have not tried powering the unit from a USB port or power supply, but it is a good question.

Q: 4. I'm disappointed with the scrunched aspect ratio when I plug my Apple TV 3 into my 36 Sony Standard definition CRT, through my eBay-cheap HDMI to RCA Analog Converter. My Sony has the Apple TV image scrunched vertically, with faces and people displaying narrow. I cant live with that? I have have gone to Settings/Audio & Video/TV Resolution and none of the settings will get rid of the scrunched screen, not even 640 x 480 - 60hz. Would this KanexPro adapter display the image from my Apple TV 3 on my old Analog 4:3 Sony CRT TV undistorted in 4x3 format?

A: Apple TVs output an HD, 16x9 signal through their HDMI output. This KanexPro will not work for you, nor am I aware of any product that will turn that to a 4x3 format without it looking squished.

Q: 5. does include the power supply?

A: Yes, the attached power adapter is included in the box.

Q: 6. I want to take the RCA output of my cameras and pass it through this unit to have upscaled HDMI output. I am trying to extend the useful life of my cameras - which are otherwise excellent! The other issue is I still need to record the video to something. Do you have any suggestions for this type of setup? Thank you!

A: I use it for a similar set up and it works fine.I use a stand alone dvr.

Q: 7. Will this work with an Atomos external recorder like my Shogun Inferno? I need to connect this to an old VHS camera and record the S-Video or RCA signal straight from camera into the Atomos Shogun but I know Atomos is very picky. Anybody here have tested this product with Atomos? Thanks

A: Works with Odyssey 7Q+....

Q: 8. I have an old Sony J-10 Betacam SP player with DV outputs that I'd like to digitize some old BetaSP tapes - will this work, and if so, is there a software interface to this product?

A: There are a list of J-10 input/output interfaces:Sync- BNC (x 1 input)Composite Video- BNC (x 1 output)Composite Video- RCA (x 1 output)S-Video- 4-Pin (x 1 output)FireWire- 6-Pin (x 1 output)Analog Component Video- 3-BNC (x 1 output)Audio- XLR (x 2 output)Audio- RCA (x 2 output)RS-422A- 9-Pin (x 1)RS-232C- 9-Pin (x 1)Headphones- 1/4-Inch Stereo (x 1 output)You don't need all of them EXEPT FireWire - 6-Pin (x 1 output)Connect it directly to your computer. Standard packages as iMovie or Premiere are working with FireWire very well (you have to have FireWire input on your computer, which is standard for old Mac, or Thunderbolt/FireWire adapter, or other FireWire input adapter for PC).With FireWire you will have the highest image quality, which is impossible with other output interfaces.

Q: 9. Can I use this device to get stereo audio output from my Panasonic TV HDMI output? I have no other way to hook the audio from my TV to my stereo system. I've tried optical DACs that say they will work but they don't.

A: The HDMI jack on the TV is very likely an input, not an output. It is intended to connect FROM a cable box, DVD player etc. TO your TV and not the other way around. Your television probably has analog audio out jacks (red and white), an optical digital output and maybe a coax digital output (orange). Your owners manual will identify the input and output jacks and they should be labeled HDMI 1 in or audio out or similar wording. The red/white should almost certainly connect your TV to the amp or better, connect one of the cable box outputs to the amp.

Q: 10. What is the part number for a replacement 5v power supply?

A: The power supply is not sold separately. If you wish one, we have been asked by KanexPro to say if you want one, please contact KanexPro directly. Support@kanexpro.com