Enjoy ultra-high-definition images while concealing your speakers with the EPV EF166C-AT8-ISF Sonic AT8 ISF eFinity 65.1 x 153" EDGE FREE Acoustically Transparent Fixed Frame Projection Screen. The EF166C-AT8-ISF is a cinema wide 2.35:1, 166" diagonal, low-profile, EDGE FREE fixed frame screen featuring EPV's Sonic AT8 ISF screen material.

The Sonic AT8 ISF surface is designed to work with all lens throws to provide ISF-certified color accuracy and wide diffusion uniformity for projected images, while offering sonic transparency to hide in-wall speakers. The Sonic AT8 ISF is UHD ready due to the multilayer ultrafine knit design to negate the moiré effect common to acoustically transparent screens, and it works best in dark environments like dedicated home theater rooms. The eFinity Series features an ultrathin, 0.4 inch, black aluminum bezel to maximize the viewable area for the footprint. The EF166C-AT8-ISF assembles and installs in minutes using a spring and grommet system for attaching the wraparound tensioned screen material, allowing for a taut, flat surface.

All hardware is included, and the lightweight split-frame design makes for easy shipping and delivery to install sites. An LED backlight kit is provided for added visual appearance. Additionally, a sliding wall mount is included to ensure proper alignment with your projector.

166" Diagonal | 2.35:1 Aspect Ratio    Sonic AT8 ISF Screen Material    1.0 Screen Gain | 180° Viewing Angle    Acoustically Transparent and Moiré-Free    UHD Ready    ISF Certified for Accurate Color    0.4" Thin Black Aluminum Frame    Works with All Lens Throw Ratios    Sliding Wall Bracket Included

The screen features an acoustically transparent, fine-weaved projection material with black backing attached. The material is designed for Ultra-HD projectors to provide the best projection surface for dedicated home theaters. It has earned the world-renowned ISF Certification for providing a flat spectral response and rendering accurate colors in a dark room environment.

To obtain ISF certification a projection screen must meet a list of essential ISF qualities such as accurate color fidelity, uniform spectral response, and black level performance.

Related Questions and Answers

Q: 1. Does attachment works with ad300pro?

A: The Godox Projection Attachment for ML30 and ML60 LED Lights (19°) is not compatible with the Godox ad300pro.

Q: 2. Would this work on any fixture with a Bowen's mount?

A: It is designed to work with the Prolycht light, 300fs. But since it has a Bowens S mount it will also fit other brand lights that have the Bowens S mount. Note, other lights have not been tested. And some might protrude out too far and not fit well.

Q: 3. Will this work with the 2400b at full power?

A: No, this accessory is recommended to be used at half power due to the High Heat level created by the Nanlux 2400B fixture. You could cook your LED's causing the Fixture to become unreliable at a given color temperature.

Q: 4. Can I use this for Nanlite 60B with Bowens mount adapter ? I don't like the PJ-FMM-36/19 without Bowens mount .

A: Yes, the Nanlite Projection Attachment will mount to the Nanlite 60 unit. For maximum output we suggest using the light shaping tool with the Forza 500 unit to increase brightness by 200% or more. Nanlite Forza 500 II Daylight LED Monolight BH #NAFORZA500II • MFR #FORZA500II https://www.bhphotovideo.com/c/product/1736659-REG/nanlite_forza500ii_forza_500_ii_led.html

Q: 5. Is this a bowens mount for compatibility with godox studio strobes?

A: This unit has a special mounting ring for use with the Godox S30. It is not a Bowens mount.

Q: 6. Can the GodoxAD600 be used with this?

A: The Nanlite Projection Attachment with 19 & 36° Lens Kit for Bowens Mount is made for LEDs and it may not have the space for the large bulb that the Godox AD600 uses. For a strobe with large bulb like the Godox AD600 I recommend the Godox BFP Flash Projection Attachment for Bowens BH #GOBFP or the Westcott Optical Spot by Lindsay Adler with 50mm f/1.4 Lens (Bowens) BH #WEO5014LB.

Q: 7. Does this work with ad300pro?

A: No, the Godox Projection Attachment for ML30 and ML60 LED Lights (19°) BH #GOMLP19K will not work with an AD300Pro.

Q: 8. Is this a bowens mount?

A: The Godox Projection Attachment for ML30 and ML60 LED Lights (19°) BH #GOMLP19K uses a Godox mount.

Q: 9. If I understand correctly could I attach a 15º leko lens to this?

A: Yes, the Nanlux NL Mount Projection Lens Adapter for Evoke Series will allow you to mount multiple third-party projection units to any Evoke series light. This includes the Leko projection unit with 15° lens.

Q: 10. One reviewer says the 30mm doesn’t fit the DP-1. Does it fit?

A: This unit was designed for use in DP1.1, DP2.1, DP1S, DP2S. We are not aware of any issues with its fitting.