Lay the foundation of your next build with the Antec Performance 1 FT Full-Tower Case. Designed for both seasoned and newcomers, the Performance 1 FT gives you ample room for gaming-focused components while promoting airflow.

Large enough to handle ATX, E-ATX, M-ATX, and M-ITX motherboards as well as graphics cards up to 15.7" long, you have ample room to store your gaming-level components with ease. Equip your system with multiple storage options using the three 2.5" drive bays for solid-state drives and two combo bays that support 2.5 or 3.5" drives. You can connect a wide range of peripherals with two USB-A 3.2 Gen 1 ports, one USB-C 3.2 Gen 2 port, and a 3.5mm combo audio jack. Magnetic mesh panels promote breathability and there are three 140mm fans located at the front of the Performance 1 FT along with a single 120mm rear exhaust fan. You can easily install various liquid AiO coolers to the front, top, and rear panels. A durable steel frame and tempered glass side panel provide solid footing and a clear look at your components.

ATX, E-ATX, M-ATX, M-ITX Support    Steel Frame & Tempered Glass Panel    3 x 2.5" Drive Bays    2 x 2.5/3.5" Drive Bays    8 x Expansion Slots    USB-A 3.2 Gen 1, USB-C 3.2 Gen 2 Ports    3 x 140mm Fans & 1 x 120mm Fan    Fits Radiators up to 420mm    Supports GPUs up to 15.7" Long    Built-In iUNITY Display

Connect your peripherals such as controllers and headsets with multiple ports found on the top panel. You get two USB-A 3.2 Gen 1 and one USB-C 3.2 Gen 2, giving you up to 5 and 10 Gb/s data transfer speeds, respectively, suitable for quickly managing your data and handling resource-demanding devices. A single 3.5mm combo audio jack supports a wide range of headsets, mics, and more. Included dust plugs for each port prevent dirt and debris, keeping the ports neat and clean.

Easily expand upon your system with eight expansion slots available for high-powered graphics cards up to 15.7" long as well as sound and network cards. Drop-proof bolt and stud system avoids side panel damage and provides a convenient DIY experience. Back-mounted PSU bracket provides easy installation for your power supply. Rubber grommets assist with cable routing and organization along with a dedicated wire management area complete with wire management ties.

While the Performance 1 FT includes three 140mm and one 120mm Storm T3 PWM fans, you can easily install additional fans for greater airflow without compromising performance. The front and top panels support up to three 140mm or 120mm fans while the rear of the case can support a single 120mm fan. Three 120mm interior fans can be installed on top of the PSU shroud.

The Performance 1 FT supports a wide range of radiators and custom liquid coolers at the front, top, and rear panels. You get enough room at the front panel to support radiators up to 420mm with a dedicated 60mm clearance for thicker setups. The top panel supports up to 360mm radiators, and a single 120mm radiator can be affixed to the rear panel.

The free-to-download Antec iUNITY software provides instant data on PC specs, loads, and usage. The top panel of the Performance 1 FT features a temperature display, giving you the thermal performance of your CPU and GPU. A dedicated button allows you to swap between both readings seamlessly.

Related Questions and Answers

Q: 1. Does this monitor work with Sony a9?

A: Yes, you will be able to use this monitor with the Sony A9. You will need a Micro HDMI to HDMI Cable to connect the camera to the monitor. https://bhpho.to/2hOzAOU

Q: 2. Projector doesn't recognize MOV + mp4 format videos in thumb drive, but manual states it does support them. Why?

A: The Vankyo Performance 700W 420-Lumen Full HD LCD LED Smart Projector (B&H # VAP700W) should support both MOV and MP4 video files, but these files are not always formatted the same between computers. Please ensure that the connected USB drive is formatted in FAT16 or FAT32, and try converting your video files to MOV or MP4 using a different computer.

Q: 3. I see velcro along the inside of the smaller rubber sunscreen hood. Do you sell a brand that fits? I do not see anything by Lilliput. I see a few options but they can not be returned if wrong guess by me. Please advise

A: If you need a replacement sunscreen hood please contact LILLIPUT USA.

Q: 4. How does this connect to a Sony MC2599 Camcorder?

A: I am sorry. We can find no reference for your camcorder.

Q: 5. does it include the canon battery mount plate? if so, is it compatible with canon LP-E6N batteries?

A: Yes, B&H provides free 12V DC adapter and also LP-E6 plate, the LP-E6 plate compatibles with Canon LP-E6 battery.

Q: 6. What's the best cage to purchase ? I'd like to set it up with a wireless transmitter for the director, but with the NP-F batteries sticking out the back, it makes it hard to find the perfect fit.

A: There isn't a specific cage built for the Lilliput A7S 7". However, you can use a universal monitor cage.

Q: 7. why stop and off at 4k recording start ?

A: This monitor does not offer recording as well. It is a monitor only.

Q: 8. does this work with a canon t3i?

A: If it has a HDMI output it should work.

Q: 9. I just bought one of these and I'm confused about the battery. Does it charge when installed on the battery plate and plugged in to power?

A: The Lilliput A7s does not have internal batteries. It runs off of an NPF L series battery.

Q: 10. Could I mount a standard ATX motherboard in this case, seeing as it's a E-ATX case?

A: Yes. I bought this case and mounted a standard ATX motherboard.