Enjoy a bright, clear image and wide viewing angle with the EPV EMX150UWH3 EPVMax 73.5 x 130.7" Motorized Projection Screen. The EMX150UWH3 is a 16:9, 150" diagonal, motorized, wall or ceiling screen featuring EPV's MaxWhite FG multilayer screen material.

The MaxWhite FG is an enhanced matte white screen, which is fiber glass backed to provide a smooth, flat surface without tab-tensioning. This screen material has a 1.1 gain, wide viewing angle, and works best in dark or dimly lit environments with higher end DLP-LCD projectors. The EMX150UWH3 is housed in a black steel case which includes endcaps for wall or ceiling installation. Additionally, you can control it however you like with an infrared and radio frequency remote control, 12V trigger wired or wireless capability, and a detachable wall box controller for manual operation, all included.

150" Diagonal | 16:9 Aspect Ratio    MaxWhite Fiber Glass Screen Surface    1.1 Gain | 180° Viewing Angle    4K Ultra HD, Active 3D & HDR Ready    IR & RF Remote Controls Included    Wall Box Controller Included    Plug & Play Low Voltage Control Built in    4-Side Black Masking & Black Backing    For Standard & Long-Throw Lenses Only    Endcaps for Wall or Ceiling Mounting

MaxWhite FG is fiber glass backed for added stiffness which provides an extremely flat non-tensioned screen surface. This material has uniform diffusion while giving precise definition, color reproduction, and black and white contrast. The screen surface has a black backing to eliminate light penetration. It is mildew resistant and washable with mild soap and water.

• 4-side black masking borders enhance picture contrast
• Black backing prevents light penetration to provide a sharp clear picture
• Not compatible with ultra-short or short throw projectors
• GREENGUARD Gold Certified—UL 2818 Safe Indoor Emissions
• Durable steel case includes endcaps for wall or ceiling mount options
• User-friendly programmable vertical drop position for easy installation
• Wall box controller is detachable for a clean look while maintaining RF & IR functionality
• Built-in selectable channels allow one RF remote programming to control multiple screens and prevent interference
• 12V trigger feature allows the screen’s UP/DOWN operation to synchronize with the projector’s power cycle
• Plug & Play design with built-in low voltage control system, no hardwire installation required

Related Questions and Answers

Q: 1. Can this be mounted upside down on a jib arm?

A: In theory, yes, but the mass (weight) of the structure may reduce the max weight limit of the camera by some %.

Q: 2. It looks like it requires a cable for each motor. Are there extension cables available?

A: Varizoom offers these extension cables. 10'-VariZoom VZ-EXTL10 Extension Cable B&H # VAVZEXTL10 20'-VariZoom VZ-EXTL20 Extension Cable B&H # VAVZEXTL2050'-VariZoom VZ-EXTL50 Extension Cable B&H # VAVZEXTL50100'-VariZoom VZEXTL100 100' LANC Extension Cable B&H # VAVZEXTL100

Q: 3. Is it suitable for Sony HDR-ASR30V action camera?

A: Yes, this would be a great choice for that action camera.

Q: 4. can i mount a panasonic ag-ux180 4k professional camcorder to this vid pro?

A: Yes you can use the Panasonic AG-UX180 4K Professional Camcorder with the Vidpro Motorized Pan & Tilt Gimbal Head.

Q: 5. Will this be compatible with canon powershot sx740hs and/or Fujifilm X-E3 with a small prime?

A: This gimbal has a payload of 2lb. A Canon Powershot camera should work well on this gimbal however a Fujifilm X-E3 is pushing it to the limit. Depending on the lens that you intend to use it is very easy to reach or overshoot the 2lb limitation. Not to mention that the X-E3 is physically larger than most point and shoot cameras which will make it more challenging to balance on this gimbal as it is designed with smaller cameras in mind.

Q: 6. what is the length between the two pins?

A: 5mm center to center.

Q: 7. Can this be used on a jib crane

A: Yes, this has both 3/8"-16 and 1/4"-20 threads on the bottom which will allow it to be mounted on to something like a jib.

Q: 8. Can this be mounted upside down on a jib?

A: We have attempted to contact Vidpro regarding your question and have not received word yet. it is our opinion that it should work upside down since remote heads often are needed to work in such a configuration. We will post as soon as we receive a response.

Q: 9. Hi there. Compatibility with Lowel Omni? I'm in a 240V country. Cheers

A: Yes, that is the correct bulb for the Omni with 240v.

Q: 10. Will it work with Nikon z5?

A: This would not be a good match. The camera's body weight alone is already close to the max weight capacity of the gimbal... Unless you were to use an extremely light weight lens that ensures that the overall weight does not exceed 2lb.