The chrome edition Allen & Heath QU-24C Mixer Kit with Stage Boxfrom Allen & Heath QU-24C Mixer Kit with Stage Boxfeatures 24 of Allen & Heath's AnalogiQ microphone preamps and is powered by its 5-core ARM processor to provide a variety of integrated effects and processing including channel-independent 4-band parametric EQs, compressors, delay, reverb, and more. The mixer is capable of recording audio to either your Mac or a USB hard drive in up to 48 kHz/24-bit resolution, allowing you to record both the individual tracks and live mix of your shows. The chrome edition adds high-contrast chrome rotary and fader knobs that improve visibility in dark conditions, as well as a number of software enhancements from the updated firmware (V1.8).

The mixer is compatible with both the ME monitoring system and dSNAKE digital connectivity system from Allen & Heath. The Qu-24 can also be used with the Qu-Pad app, allowing you to use your iPad to mix from anywhere in the venue when connected to a wireless network.

24 AnalogiQ Preamps    5" Touchscreen    25 Motorized 100mm Faders with Recall    Integrated iLive FX    48 kHz / 24-Bit Resolution    16 Mic Preamps with Phantom Power    8 x XLR Line-Level Outputs    Can Be Positioned Up to 393' from Mixer    dSNAKE Protocol Over Cat 5    100' Long Cat 5 Cable

• Pro Factory Mic Presets co-developed with leading microphone manufacturers including Shure, Sennheiser, and Audio-Technica
• Updated iPad app functionality
• Windows Daw Control app
• DAW Templates online for users of Cubase, Logic X, and Pro Tools
• And More

Qu-24's twenty-four AnalogiQ total recall preamps feature zero-crossing detection and a padless 1 dB-step gain stage, closely allied to the DSP for optimal gain accuracy and audio transparency. The analog signal is captured by low-latency 24-bit analog-to-digital converters matched to 24-bit digital-to-analog converters to deliver the required outputs. The AnalogiQ design has been refined to offer transparency, minimal distortion, and an ultra-low noise floor, with a warm, musical sound

Having massive processing power and advanced functionality is great, but it counts for nothing if you can't access the controls you need in a heartbeat. Once you start using Qu-24 you'll sense the years of research into ergonomics and the hands-on mixing experience that delivers a natural layout and workflow. It's not about recreating an analog interface; it's about creating an experience that's fluid, comfortable and intuitive for novices, digital natives and old-school road warriors alike, making all the benefits of digital mixing technology readily accessible to all

The 800 x 480, sixteen-million color touchscreen and its dedicated data encoder form the heart of the Qu interface, providing fast access to all settings. The user-friendly interface has been designed with clarity in mind. Dedicated keys and screen tabs guide you to meter and RTA views, FX racks, channel processing, USB audio control, scenes, setup menus and much more

All your key processing tools are presented in a clean layout on the SuperStrip, with 1 function per physical control. The SuperStrip is complemented by an onscreen Touch Channel for intuitive access to full processing parameters without clutter or complex menu structures. Processing for Mono and Stereo inputs includes trim, polarity, HPF, gate, insert, 4-band PEQ, compressor and delay. The main LR and the Mono mixes have controls for Insert, 1/3 octave GEQ, compressor and delay. The Stereo mixes provide Insert, 4-band PEQ, compressor, delay and balance control

Moving faders started as an expensive option in the studio desks of the '80s, and later became the norm with the advent of digital technology. Nevertheless some entry-level digital mixers lack this feature which is a fundamental part of the Total Recall approach. Fader automation is essential for rapid mixing, especially when you're dealing with multiple monitor mixes. Just press a mix key and the faders immediately fly to the send levels for that mix. Qu-24 features 25 motorized ALPS faders, 24 arranged over 2 layers, allowing instant access to all channels and masters in a compact space, plus a dedicated master fader which dynamically follows the mix selection. A third, Custom layer is available for ad-hoc user strip layout, where any combination of Inputs, FX Sends, FX Returns and Mix masters can be assigned

Qu-24's dynamics and FX algorithms are derived from the FX used in Allen & Heath's iLive pro touring series. Qu-24 boasts 4 stereo iLive FX engines, featuring emulations of classic reverbs, gated reverbs, delays, modulators, flangers and more. The FX library has the ability to grow with future firmware releases. FX are returned to the mix on dedicated return channels, so you're not tying up your mono and stereo input channels. Each Stereo FX Return has a dedicated 4-band PEQ

True digital mixing is about being able to save and recall scenes (snapshots) at the press of a button. Qu-24 can store up to 100 full Scenes for recall at will. Channels and mixes can be made Safe from Scene recall. For example, if an instrument or mic gets swapped out after the soundcheck, the channel can be made safe to avoid settings being overridden by Scene recalls. Or if a broadcast feed or walk-in iPod is added last-minute before the show kicks off, that mix or channel can be made safe from any scene change. In addition, single-parameter updates can be blocked using per-scene Recall Filters or a Global Recall Filter. So if you tweak the graphic EQ to reflect the room response when the audience gets in, you can block this to prevent any overwriting at scene change. Custom settings for each EQ, compressor, channel or FX can be saved as Library presets. This lets you store your tried and tested SM58 EQ or reverb pattern and apply it to other channels or shows. Libraries, Scenes and the complete Show configuration can be saved to a USB key, so you can carry the show with you, ready to use on another Qu mixer

Qu-24's built-in interface streams multi-track audio to your Mac: all mono channels, the Main LR mix and 3 selectable stereo pairs. The returns from the Mac can be assigned to the mono channels plus stereo. The interface is class-compliant on Mac OS X - which means it's truly plug-and-play, with no need to install a driver. It will be recognized straightaway by any DAW supporting Core Audio, including Logic, Cubase, Reaper, and Pro Tools. Standard MIDI control is tunneled over the USB connection so you can easily map the faders to the tracks of your favorite DAW. Alternatively, a MIDI driver is available for use with the Ethernet port

Forget soundcard drivers and software setup. Qu-24 has an integrated multi-track USB recorder, providing 18 channels of 48 kHz/24-bit recording and playback straight to or from your USB hard drive, allowing you to capture multi-track recordings of your shows. A selectable stereo pair can be recorded alongside 16 mono channels, and multi-track audio can be played back to 16 mono channels plus ST1. On top of this, Qu-Drive also provides stereo recording, patchable from any pair of Mix outputs, the Main LR (pre, post, or summed to mono) or even the PAFL bus, with 2- track stereo playback to ST3

Qu-24 is equipped with 5 cores of high-efficiency ARM core processing, with dedicated ARM cores running the touchscreen display and surface, USB streaming, Qu-Drive multi-channel USB recording / playback, Ethernet and fader automation. Between them the ARM cores provide processing, working in parallel to deliver extensive control, instant-on operation, and fast response. The mixer's DSP farm exploits next generation dual-core DSPs. With plenty of DSP power under the hood the channel processing is only using a fraction of capacity, so Qu-24 is designed to be future-proofed, with ample room for updates and extra functionality. The Qu DSP architecture employs varied bit depths, tailored to specific algorithms, with 48-bits on critical EQ functions and a 56-bit accumulator on the mix bus where it really counts, allowing every nuance of the audio to be captured in the final mix

Made from 18-gauge, cold-rolled Zintec steel, Qu-24's distinctive frame is designed for strength and rigidity. Allen & Heath has done unspeakable things to that chassis in the lab and it's taken everything they have thrown at it - even being stomped on by our resident ex-tank commander. Silence is a precious commodity in the live or studio environment, which is why nobody wants those moments of stillness ruined by the whirring of fans coming from the mix position. Qu's sleek profile generates optimal airflow through the mixer, eliminating the need for any fans

Add the Qu-Pad iPad app to your Qu setup and you're free to adjust the monitors on stage, roam around the venue whilst tweaking the PA, and then mix the show from the heart of the audience. Qu-Pad connects to the mixer over Wi-Fi and gives instant access to all live mixing parameters and settings. Qu-Pad requires the connection of a Wi-Fi router or access point to the Qu-24 Network port

Qu-24 is fully compatible with Allen & Heath's ME Personal Mixing System. Any number of ME-1 personal mixers can be chained from the dSNAKE port (or from an AR2412 Stagebox if you've got one connected to the dSNAKE port). Each performer can be given tailored control over their own mix, leaving the engineer free to focus on the audience experience

Qu-24 is a self-contained mixer, so if you've already got the analog cables you're good to go. If you're thinking of trading in the copper multi-core for a Cat5 digital snake, Qu-24's dSNAKE port has you future-proofed, allowing connection to a remote AR2412 or AR84 Stagebox. dSNAKE is Allen & Heath's proprietary networking solution, boasting a transport latency of only 105μs over cable runs of up to 390 feet (120 m). So if you're mixing FoH you can place your I/O on the stage and run a single Cat5 cable back to the Qu-24 in the mix position

Qu-24 packs 10 SoftKeys for more user-assignable functions such as Mute Groups, Tap Tempo, Scene navigation or PAFL Clear

Groups 1-4 are typically used as subgroups to LR for level masters and/or processing, for example to compress a drum kit or to tame multiple lavalier microphones with a single graphic equalizer

Qu-24's Matrix adds 2 further stereo outputs equipped with full processing to the console's extensive I/O. It is a 'mixer within a mixer,' fed from any combination of Group 1-4, Mix 1-10, and main LR. It can be used to provide a broadcast feed, a recording mix, or duplicate the main outputs for delay stacks and fill / zone speakers where independent GEQ and delay is applied

Related Questions and Answers

Q: 1. Does this have a hard limiter I can apply to all 32 inputs? (I have some screamers occasionally)

A: Yes. According to page 33 in the manual for the Allen & Heath Qu-32C; "At its extreme setting the compressor can be used as a limiter to prevent the signal exceeding a preset maximum level."

Q: 2. can you add waves plugins ?

A: This system is Core Audio compliant. You may load WAVES plug-ins into your Mac for use with your current compatible DAW.

Q: 3. HOW MUCH DOES THIS UNIT WEIGH?

A: Weight:ZED Sixty 10 FX: 4.4kg (9.7 lb)

Q: 4. I want to use this with ProTools 11 is there a usb or a slot to put a converter in?

A: The Qu-32 features a built in interface and can be used with Pro Tools using the rear panel USB connection. The interface is class-compliant on Mac OS X and drivers are available for Windows systems.

Q: 5. Can this be used with Zoomgov?

A: Yes

Q: 6. So phantom power is either all on or all off for all channels? No individual settings?

A: Yes, the 48V Phantom Power switch on the Allen & Heath ZED60-10FX - 6 Channel Mixer with Digital Effects and USB Connectivity is universal, sending phantom power to all four XLR microphone inputs when engaged.

Q: 7. Does this have a monitor output (not tablet) so you can have, say, all of your meters displayed on an external screen?

A: The Allen & Heath CQ-18T Compact 18-Channel Digital Mixer with Touchscreen does not have a video output.

Q: 8. Does this increase the channels of QU-16 mixer from 16 to 32 ?

A: No, the Allen & Heath AB168 Portable AudioRack is stagebox that allows you to position the inputs and outputs for your Allen & Heath Qu-16 mixer up to 393' (120m) away from the mixer using a single Cat5 cable. It does not increase the number of channels for the Qu-16 from 16 to 32.

Q: 9. Can the Allen and Heath Qu32 mixer use a Cat5 cable to send/receive audio to and from a DAW? Thanks.

A: No. Only USB.

Q: 10. What's the difference between qu series and qu chrome?

A: Chrome has shiny knobs & faders, the regular QU has the black rubber-ish knobs.