Polymaker 2.85Mm Polylite Abs Filament 1Kg Black

Polymaker 2.85mm Polylite Abs Filament 1kg Black

Product Code: eq154829
Availability: In Stock

$50.58 $65.75

Qty

12 reviews Write a review

Description
Reviews (12)

Bring your creations to life with the Polymaker 2.85mm PolyLite ABS Filament 1kg Blackfrom Polymaker. Compatible with a wide range of 3D printers, this ABS material allows you to print high-quality models and working prototypes, ideal for seasoned and entry level users.

PolyLite ABS uses a specialty bulk-polymerized resin, producing lower volatile content and minimal odor during printing, keeping your work area neat and clean. This ABS filament operates at a printing speed ranging from 30 to 50mm/s, nozzle temperature of 473 to 509°F, and bed temperature of 194 to 212°F. Each spool comes in a resealable vacuum bag and includes a desiccant bag to help fend off moisture when not in use.

2.85mm Diameter Nozzle Temperature: 473-509°F Bed Temperature: 194-212°F Printing Speed: 30-50mm/s Desiccant Bag Resealable Vacuum Bag

Parameters
Filament Diameter	2.85 mm
Filament Material	ABS
Color	Black
Weight	2.2 lb / 1 kg
Packaging Info
Package Weight	2.825 lb
Box Dimensions (LxWxH)	9.8 x 8.2 x 2.8"

Related Questions and Answers

Q: 1. The Overview states it's easily interchangeable. It has a universal mounting plate which stays connected to your camera and slides into the Ballhead X for easy setup and quick interchangeability; switch between cameras in an instant. Does this have a quick-release then? How does it and how fast does the thread that's attached tot he DSLR un-mounts from the GorillaPod?

A: Jimmy,If I am understanding your question correctly you are asking how quickly the mounting plate attaches to the camera or lens. There is a flip-up lever on the bottom of the plate so you do not need a screwdriver and it takes three 360 degree turns to fully attach the plate. If extreme speed is desired you could just buy more than one plate. This is not a tripod system that is going to hold a long heavy lens even if the lens has a tripod mount collar.

Q: 2. Can i use hypersmooth whilst loop recording?

A: With the Hero 10 Black, one can use hypersmooth with loop recording.

Q: 3. Does go pro only work with micro disk?

A: Correct. GoPro will only use Micro SD Cards.

Q: 4. How long can I ex=ect the battery to last?

A: Action camera batteries life span will vary based on the charge cycle, use of product and how the battery is carried for by the user.

Q: 5. can owners comment on the effectiveness of the firmware fix for overheating?

A: Users have reported 40% increases in overall battery performance with the new firmware and no major issues with overheating.

Q: 6. What is its minimun focus distance?

A: The minimal focal distance of about 10in.

Q: 7. does it work with the SLR Zoom gorillapod?

A: Yes. Moreover, this ball head works with any tripod that can receive a ball head with 1/4 or 3/8 screw hole. The adaptor is included. Note that the Gorilla pods have a 1/4 screw.

Q: 8. What is the optimum storage requirement ? It says minimum v30 or UHS3. V30 doesn't have to be UHS3. Can someone please clarify? What is the minimum write and read speed requirements?

A: The HERO10 has the same support as the HERO9 for recommended UHS Speed Class 1 (U3) and Class 10 and UHS Video Speed Class 30 (V30) cards that are rated for 4K video.

Q: 9. Are the hero 6 batteries compatible with the Gopro Hero 10?

A: Batteries for the GoPro Hero 6 will not work for the GoPro Hero 10.

Q: 10. Can this camera take video without the fisheye effect?

A: After you shoot with the GoPro HERO10 Black, open in GoPro Studio, go to Advanced Settings and Remove Fisheye option.

Daniel	04/09/2024
[Black] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint 5

David	09/08/2024
[2.825 lb] Had some other brand ABS+ that was supposedly for high speed printers, but it was warping like mad. I bought this on a whim, and it worked perfectly first time. Have yet to have a failed print with it (knock on wood). 5

Daniel	11/07/2024
[2.825 lb] This material is one of my hands down favorites. The color intensity is truly a charcoal black. To me, it beats all other silk materials because of its light diffusing properties. Its rough to the touch and doesn't have the dry time CF does. Fantastic material and I will keep buying it again and again 5

Mikel	08/07/2024
[Black] This Teal PLA turned out great. Inky has been out front for about 6 months under various weather condition and no issues. This turned out to be the best looking Teal for Inky. 5

Daniel	03/07/2024
[2.85 mm] This stuff is impressive. It has a much higher tolerance for printing fine pieces. Its sand-able and workable and much more rigid than PLA. It does have some issues I'm finding joints aren't as well supported because of the fiber content versus plastic but once I engineer the model to accommodate, it works amazingly well. 5

Daniel	23/06/2024
[ABS] This gold is the same as any other, the color is vibrant and the silk effect works well. Polymaker tends to be my go-to for these types of base material colors because the material works well, and I have the least number of issues for the price point. 5

Mikel	26/05/2024
[2.85 mm] Clyde has been out for 6 months under various weather conditions. This Orange PLA turned out great for Clyde. 5

Mikel	23/05/2024
[2.825 lb] Pinky has been in my front lawn for about 6 months. This Pink is the best Pink PLA for Pinky. 5

Mikel	15/05/2024
[2.85 mm] This took two spools of yellow to create this basketball size Pac Man for my front yard garden. This yellow PLA turned out great and has weathered for about 6 months with no discoloration. 5

Daniel	01/05/2024
[Black] Literally no reason to have this material, but its so fun. It glows bright and as expected, making stars, fidgets, light covers, what a blast. 5