Polymaker 1.75Mm Polylite Abs Filament 1Kg Pink

Polymaker 1.75mm Polylite Abs Filament 1kg Pink

Product Code: eq154836
Availability: In Stock

$50.58 $68.79

Qty

9 reviews Write a review

Description
Reviews (9)

Bring your creations to life with the Polymaker 1.75mm PolyLite ABS Filament 1kg Pinkfrom Polymaker. Compatible with a wide range of 3D printers, this ABS material allows you to print high-quality models and working prototypes, ideal for seasoned and entry level users.

PolyLite ABS uses a specialty bulk-polymerized resin, producing lower volatile content and minimal odor during printing, keeping your work area neat and clean. This ABS filament operates at a printing speed ranging from 30 to 50mm/s, nozzle temperature of 473 to 509°F, and bed temperature of 194 to 212°F. Each spool comes in a resealable vacuum bag and includes a desiccant bag to help fend off moisture when not in use.

1.75mm Diameter Nozzle Temperature: 473-509°F Bed Temperature: 194-212°F Printing Speed: 30-50mm/s Desiccant Bag Resealable Vacuum Bag

Parameters
Filament Diameter	1.75 mm
Filament Material	ABS
Color	Pink
Weight	2.2 lb / 1 kg
Packaging Info
Package Weight	2.845 lb
Box Dimensions (LxWxH)	8.8 x 8.8 x 2.7"

Related Questions and Answers

Q: 1. Will this work with a Nikon Z9?

A: Yes, the Spider Camera Holster SpiderPro Hand Strap V2 will work on a camera even if it has a vertical grip like the Nikon Z9 Mirrorless Camera.

Q: 2. Is this strap compatible with Peak Design AL-4 Anchor Links?

A: According to the manufacturer, the compatibility with this SpiderPro Hand Strap V2 and the Peak Design Anchor Links would be camera dependent, as the strap connections can vary among the different makes/models.

Q: 3. What is the collapsed size of this phone stand?

A: The GEOMETRICAL Carbon Fiber Pocket Tripod Pro with Adapter Kit (Matte Black) is 2.29mm thick with the dimensions of a standard credit card at 2.1 x 3.4".

Q: 4. Will this work with a Canon Eos R?

A: Thank you, Maria - YES. you will not need to use any adapters - threads onto the neck strap slot. All the very best, Spider Team

Q: 5. The first line of the instructions says Select either iOS or Android on the handle Where is the switch to make this selection? It doesn't show up to be paired in Bluetooth on my phone.

A: Use the shutter button on the handle.

Q: 6. Does it work w/ the iPhone 7+?

A: Yes it will. The clamp open to 4 and the iPhone 7 plus without a case is 3.07 .

Q: 7. Does it come in other colors?

A: This case comes in black, dark brown, pink, and hot pink, in different sizes.

Q: 8. When using this do you have to remove the neck strap? Or can the strap stay on the camera?

A: Yes. The neck strap has to be removed.

Q: 9. Does this camera work with any type of film? I would like to know if it works with Kodak Porta 400 and CineStill 800.

A: The Ektar H35N will work with most standard 35mm film up to 36 exposure canisters. This will give you up to a total of up to 72 half frame exposures.

Q: 10. Will the Spider hand strap work with Sony Cybershot RX10M4?

A: Yes, The Spider Camera Holster SpiderPro Hand Strap V2 will accommodate the Sony Cyber-shot DSC-RX10 IV but i snot ideal as the eyelets sit on the side of the camera.

Daniel	29/08/2024
[ABS] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed. 5

Mikel	19/08/2024
[ABS] This Teal PLA turned out great. Inky has been out front for about 6 months under various weather condition and no issues. This turned out to be the best looking Teal for Inky. 5

Daniel	02/08/2024
[2.845 lb] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint 5

Daniel	08/07/2024
[ABS] Literally no reason to have this material, but its so fun. It glows bright and as expected, making stars, fidgets, light covers, what a blast. 5

Daniel	02/07/2024
[1.75 mm] This gold is the same as any other, the color is vibrant and the silk effect works well. Polymaker tends to be my go-to for these types of base material colors because the material works well, and I have the least number of issues for the price point. 5

Daniel	18/05/2024
[1.75 mm] This stuff is impressive. It has a much higher tolerance for printing fine pieces. Its sand-able and workable and much more rigid than PLA. It does have some issues I'm finding joints aren't as well supported because of the fiber content versus plastic but once I engineer the model to accommodate, it works amazingly well. 5

David	17/05/2024
[ABS] Polymaker is one of the best filaments out there and for sure the best company out there I can think of. They do so much good for the community so I'm always more than happy to support them any way I can. This stuff prints like a dream. 5

Mikel	07/04/2024
[2.845 lb] Clyde has been out for 6 months under various weather conditions. This Orange PLA turned out great for Clyde. 5

Mikel	30/11/-0001
[2.845 lb] This took two spools of yellow to create this basketball size Pac Man for my front yard garden. This yellow PLA turned out great and has weathered for about 6 months with no discoloration. 5