Polymaker 1.75Mm Polylite Abs Filament Light Blue 1Kg

Polymaker 1.75mm Polylite Abs Filament Light Blue 1kg

Product Code: eq154838
Availability: In Stock

$52.50 $72.97

Qty

15 reviews Write a review

Description
Reviews (15)

Bring your creations to life with the Polymaker 1.75mm PolyLite ABS Filament Light Blue 1kgfrom Polymaker. Compatible with a wide range of 3D printers, this ABS material allows you to print high-quality models and working prototypes, ideal for seasoned and entry level users.

PolyLite ABS uses a specialty bulk-polymerized resin, producing lower volatile content and minimal odor during printing, keeping your work area neat and clean. This ABS filament operates at a printing speed ranging from 30 to 50mm/s, nozzle temperature of 473 to 509°F, and bed temperature of 194 to 212°F. Each spool comes in a resealable vacuum bag and includes a desiccant bag to help fend off moisture when not in use.

1.75mm Diameter Nozzle Temperature: 473-509°F Bed Temperature: 194-212°F Printing Speed: 30-50mm/s Desiccant Bag Resealable Vacuum Bag

Parameters
Filament Diameter	1.75 mm
Filament Material	ABS
Color	Light Blue
Weight	2.2 lb / 1 kg
Packaging Info
Package Weight	2.84 lb
Box Dimensions (LxWxH)	10 x 8.2 x 2.7"

Related Questions and Answers

Q: 1. These seem great but I have two and thy are still blue. So, my question is "Has anyone ever had one turn Pink, and then turn turn back to Blue after microwave?

A: If the Barska Dehumidifier Pack is still blue, this would indicate that there is still room to collect more moisture. As soon as it has reached its limit, the pack will turn pink.

Q: 2. what is the length of the blue yeti blackout micrphone's cable?

A: The USB cable included with the Blue Yeti USB Microphone is 6 feet long.

Q: 3. Will this microphone work with a Zoom H4n?

A: Yes it will. Connect via the included XLR cable.

Q: 4. Will the Canon EOS R with 24-70 RF f2.8 lens fit in this?

A: Yes, a Canon EOS R with an RF 24-70mm f/2.8 can fit in the Moment Strohl Mountain Light Camera Loader.

Q: 5. Will this hold a Canon R7 with either a RF 24-240 lens or an RF 18-150 lens?

A: Yes, you can fit the Canon EOS R7 Mirrorless Camera with any of your 2 lenses attached inside the Moment Strohl Mountain Light Camera Loader (Blue). The bag interior dimensions are 9 x 6.5 inches. The camera with the Canon RF 24-240mm f/4-6.3 IS USM Lens wich is the longer lens is 7.5 x 5.5 inches.

Q: 6. Can this be used with Dragon Naturally Speaking or Windows Dictation, Google Speech, etc. In other words, will it work for speech to text microphone?

A: I do not see why not.

Q: 7. Why is the XLR a 4-pin?

A: The Yeti Pro has a male 5-pin XLR connector (not 4-pin) on the bottom which is a stereo XLR connector for stereo applications. A 12" Y-cable with two standard male 3-pin XLR connectors is included with the mic which outputs stereo audio via the left and right XLR connectors when using the mic in stereo mode. When the Yeti Pro is used in the other modes, a mono signal is output to both the left and right XLR connectors.

Q: 8. will a canon 5d mark iv with battery grip fit in here as well as a sigma 85mm and canon 50mm lens? possibly the sigma 35mm or an external flash?

A: No it will not. Maybe the body alone but with the grip for sure it is a no. I can't fit my D800 with the grip on. Hope this helps.

Q: 9. What is the best recording software to use with this for PC? Would I be able to use this with Vegas Video?

A: AUDACITY

Q: 10. Will it fit a Leica m camera?

A: The Leica Ettas Pouch is specific to the Leica Q2.

Vitaliy	08/08/2024
[Light Blue] it needs a bit of modification on the printer to work but it is easy. The material is strong but need heat to melt. 5

Daniel	24/07/2024
[1.75 mm] This stuff is impressive. It has a much higher tolerance for printing fine pieces. Its sand-able and workable and much more rigid than PLA. It does have some issues I'm finding joints aren't as well supported because of the fiber content versus plastic but once I engineer the model to accommodate, it works amazingly well. 5

Francisco	27/06/2024
[1.75 mm] Excellent Filaments 5

Daniel	12/06/2024
[ABS] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed. 5

Daniel	09/06/2024
[Light Blue] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint 5

Mikel	07/06/2024
[2.84 lb] Clyde has been out for 6 months under various weather conditions. This Orange PLA turned out great for Clyde. 5

Daniel	17/05/2024
[2.84 lb] This gold is the same as any other, the color is vibrant and the silk effect works well. Polymaker tends to be my go-to for these types of base material colors because the material works well, and I have the least number of issues for the price point. 5

David	15/05/2024
[2.84 lb] Had some other brand ABS+ that was supposedly for high speed printers, but it was warping like mad. I bought this on a whim, and it worked perfectly first time. Have yet to have a failed print with it (knock on wood). 5

Daniel	04/05/2024
[10 x 8.2 x 2.7"] This material is one of my hands down favorites. The color intensity is truly a charcoal black. To me, it beats all other silk materials because of its light diffusing properties. Its rough to the touch and doesn't have the dry time CF does. Fantastic material and I will keep buying it again and again 5

Mikel	04/05/2024
[Light Blue] This took two spools of yellow to create this basketball size Pac Man for my front yard garden. This yellow PLA turned out great and has weathered for about 6 months with no discoloration. 5