Polymaker 2.85mm PolyTerra PLA Filament Sakura Pinkfrom Polymaker 2.85mm PolyTerra PLA Filament Sakura Pinkis a PLA-based 3D printing filament designed with a focus on being environmentally friendly. It's made to deliver high printing quality and speed while being easy to use and reliable. It's made with a material from Polymaker called Fully Bio Compound (FBC), which is a compound of PLA bioplastic and a bio-composite. Polymaker offers it as a cost effective and eco-friendly solution. Polymaker also emphasizes that PolyTerra PLA can easily be removed.

PolyTerra PLA filament is compatible with most of the printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more. For best printing results, it's recommended to print PolyTerra PLA in temperatures between 374 to 446°F.

PolyTerra PLA can be printed at a wide range of speeds. Polymaker recommends speeds between 30 and 70mm/s, but they have successfully tested it on some printers at speeds up to 140mm/s.

If your printer has a direct-drive extruder, the recommended retraction distance is 1mm and the retraction speed is 20mm/s. If your printer has a Bowden extruder, the recommended retraction distance is 3mm and the retraction speed is 40mm/s.

PolyTerra PLA degrades under the specific conditions of industrial composting, namely, at certain temperatures and humidity with the presence of micro-organisms. The degrade rate will depend on the size and thickness of the printed part.

Due to Polymaker's heat treatment of the filament, PolyTerra PLA can withstand temperatures of 212°F. However, the printed PolyTerra PLA parts can only withstand temperatures up to 140°F because the crystallinity of the filament changes during the printing process.To glue PolyTerra PLA parts together, common glues used for PLA parts can be used. Polymaker suggests cyanoacrylate glue (superglue) as generally the best choice.

Is PolyTerra PLA food safe? Compliant with RoHS directives 2011/65/EU and (EU) 2015/863, and REACH regulation, PolyTerra PLA does not contain toxic or harmful substances. However, the printed PolyTerra PLA parts might have micro-cracks and holes which are invisible to the naked eye even though the prints look smooth. Bacteria are prone to grow in these micro-cracks and holes, so it is not recommended to use the printed parts in food contact applications.

For more information, please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.

PLA Bioplastic & Biocomposite Compound    Compatible with Most 3D Printers    374 to 446°F Print Temperatures    30 to 70 mm/s Print Speed    Direct-Drive Retraction: 1mm / 20mm/s    Bowden Retraction: 3mm / 40mm/s    Heat Treated    Smooth Surface Finish    Recycled Cardboard Packaging and Spool

374 to 446°F

30 to 70mm/s

77 to 140°F

Glass, Blue Tape, BuildTak

On

Related Questions and Answers

Q: 1. Does it work w/ the iPhone 6 and/or iPhone 6+?

A: Yes it does. It works great with iPhone 6. I don't have iPhone 6+ so I can't tell you about it, but it looks like it won't be a problem.

Q: 2. Does this camera work with any type of film? I would like to know if it works with Kodak Porta 400 and CineStill 800.

A: The Ektar H35N will work with most standard 35mm film up to 36 exposure canisters. This will give you up to a total of up to 72 half frame exposures.

Q: 3. Will it work with the OM1 mk2 ?

A: Yes, the Spider Camera Holster SpiderPro Hand Strap V2 (Red) can be attached on the OM SYSTEM OM-1 Mark II Mirrorless Camera.

Q: 4. I tried the v1 strap, but it seems large for my mirror less body. Does the v2 strap fit smaller mirrorless cameras better than the v1?

A: The Spider Camera Holster SpiderPro Hand Strap V2 fits best with larger mirrorless camera bodies.

Q: 5. Is this strap compatible with Peak Design AL-4 Anchor Links?

A: According to the manufacturer, the compatibility with this SpiderPro Hand Strap V2 and the Peak Design Anchor Links would be camera dependent, as the strap connections can vary among the different makes/models.

Q: 6. Do these work with the Ikelite 8inch dome?

A: This is compatible with all Ikelite DSLR ports.

Q: 7. Will this work with a Canon Eos R?

A: Thank you, Maria - YES. you will not need to use any adapters - threads onto the neck strap slot. All the very best, Spider Team

Q: 8. Will the Spider hand strap work with Sony Cybershot RX10M4?

A: Yes, The Spider Camera Holster SpiderPro Hand Strap V2 will accommodate the Sony Cyber-shot DSC-RX10 IV but i snot ideal as the eyelets sit on the side of the camera.

Q: 9. What is the difference between this model and the original spider pro hand strap?

A: Proprietary Nylon core “remembers”, or conforms to your hand shape and shooting angle after repeated use.The updated design features a wider memory foam interior for optimal hand support all day long. The SpiderPro Hand Strap v2 is designed to fit both DSLR and Flagship Mirrorless camera bodies.

Q: 10. Does it come in other colors?

A: This case comes in black, dark brown, pink, and hot pink, in different sizes.