Get the ultimate wind protection for you omnidirectional lavalier, field-recording, or headset microphone with the Bubblebee Industries The Windbubble PRO Fur Windscreen (White, XS). The PRO version features a special rubber mount, which absorbs shocks and stops the transference of vibrations through to your microphone's capsule. This XS-sized Windbubble PRO easily fits on microphones with a diameter of 3 to 5mm. The package includes one fur windscreen.

Note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a cardioid/directional microphone, then the original Windbubble is the preferred microphone windshield for your mic.

Wind Protection for Omni Lavalier Mics    Also for Field Recording & Headset Mics    Fits Mics 3 to 5mm in Diameter    Multi-Pile Faux Fur    Soft Rubber Mount    Acoustically Transparent

• Countryman: B3, B6, E3, E2, E6, H6
• DPA: 6060, 6061, 6066, 4466
• Sanken: COS-11 without metal popshield, COS-11D-HWM
• Sennheiser: MKE 1, MKE 2, HSP 2, HSP Essential Omni
• Sony: ECM-88, ECM-90
• Omnidirectional lavalier, field-recording, and headset microphones 3 to 5mm in diameter

• Unlike hard plastic mounts, The Windbubble PRO's soft rubber mount absorbs shocks and stops vibrations transferring to your mic's capsule.
• In addition, the rubber mount has a slight, conical shape inside, which prevents you to push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity.
• This means that your mic will consistently stay in the best possible position inside the windshield, making it possible to engineer a smaller, overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. 

• The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off mid-shoot.

• The Windbubble PRO utilizes the company's multi-pile faux fur specially designed with varying lengths of fur to help gradually slow down the wind before reaching the mic.
• The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency.
• The mic's capsule is kept in a calm bubble of wind protection and allowed to perform at its best.
• The Bubblebee fur is less shiny than others to better blend with skin, clothes, and other surrounding materials.

Related Questions and Answers

Q: 1. description says this is for Rode lavs -- are these also compatible with other brands?

A: They will fit sennheiser lavs if you remove the inner of two rubber rings. Nice snug fit.

Q: 2. How to connect to camera when mounting VideoMic Pro on a boom arm? Can I use a 10' 3.5mm TRS extension cable? Or can I plug into the a Rode Wireless Go and connect to the camera wirelessly?

A: The Rode VideoMic Pro Camera-Mount Shotgun Microphone could be connected to the camera over a cable such as the Rode VC1 3.5mm TRS Microphone Extension Cable for Cameras (BH #ROVC1) while mounted to a boompole. The VideoMic Pro can also be set up for wireless transmission by connecting to a wireless microphone transmitter and receiver system such as the Rode Wireless GO II (BH #ROWGIIS).

Q: 3. Any reason to get this over the regular Rode VideoMic?

A: Hello Justin, the Rode VideoMic Pro has a built in +20dB preamp which allows you to reduce the gain inside your camera. Note that the camera needs to allow you to lower its preamp. This will result in the microphone handling most of the gain and lowering the overall noise in your recording.

Q: 4. Can the presenter move around a little bit from the microphone and still get good quality recording to the camera?

A: This mic must be used with Rode's RX-CAM recorder. For quality pickup, the presenter does need to be consistently speaking within 3-6 inches of the microphone. Beyond that, it will be hard to hear the presenter.

Q: 5. Can I replace the 3.5 mm cable since it's demadged?

A: The attached 3.5mm TRS cable is not user replaceable. Please contact RØDE directly for repair: RØDE: Tel: (562) 364-7400 or (888) 412-4664 Email usasupport@rodemic.com

Q: 6. Can it be connected to rodecaster duo via wireless connection?

A: The RODE TX-M2 Handheld Wireless Microphone can only be wirelessly connected to RodeLink wireless mic receivers (Rode RX-CAM). That is how you would establish a wireless connection, and then the receiver can be physically connected to an audio interface such as the RodeCaster Duo.

Q: 7. Will this mic link with the Rode Wireless Go receiver?

A: Hello Larry. No, the RodeLink systems only work inside the RodeLink product line. The Wireless Go system only works as its own set currently. The TX-M2 will work perfectly with the Rode RX-Cam however.

Q: 8. Hello, are they any difference in sound quality between the one with the rubber band mount vs this rycote version? Thanks!

A: Not sure if there's a big difference as far as sound quality while still on a tripod or boom stand. But if your a run and gun type person, then the shock mount on this mic helps a ton!

Q: 9. Will this mic work with Canon XA30?

A: The Canon XA30 offers a stereo 1/8 (3.5mm) mini microphone input for use with this microphone.

Q: 10. Will this fit on a SmartLav+?

A: Yes, the Rode Synthetic Mini Fur Windshield for Lavalier Microphones will fit on the Rode SmartLav+ Lavalier Condenser Microphone for Smartphones with TRRS Connections.