Raise your home entertainment to new heights with the EPV FRT101H2UST-DS DarkStar MAX UST-FR 49.5 x 88" Ceiling Light Rejecting Motorized Floor-Rising Projection Screen. The FRT101H2UST-DS is a 16:9, 101" diagonal, motorized, rising screen, featuring EPV's DarkStar UST, ambient light rejecting screen material.

This motorized, floor-rising screen comes preassembled and is powered via standard 3-prong AC connection. It requires no complicated installation, just plug and play. The DarkStar UST screen material is specially designed for bottom-placed ultra-short throw projectors to produce a high-contrast, uniform image with a wide viewing angle. The multilayer structure filters out up to 95% of overhead lighting to work well in many ambient lighting scenarios. For your convenience, RF, IR, and 12V trigger controls are included.

101" Diagonal | 16:9 Aspect Ratio    DarkStar UST CLR Screen Material    0.5 Screen Gain | 180° Viewing Angle    4K Ultra HD, Active 3D & HDR Ready    Pre-Assembled Motorized Rising Screen    For Bottom-Placed Ultra-Short Throw    Tab-Tensioned Design    Absorbs 95% of Overhead Lighting    Plug & Play 3-Prong AC Power Connection    IR & RF Remote Controls Included

The DarkStar UST is a ceiling light-rejecting front projection material designed specifically for tabletop-mounted ultra-short throw projectors. The DarkStar UST features a multilayer optical lens structure that absorbs off-axis light from above while providing a clear image. This allows the picture to be free from washing out the projected image.

• Internal radio frequency and infrared receivers with IR/RF remotes
• Infrared IR “eye” extension sensor and a 5-12 volt trigger to synchronize screen operation with the projector’s power cycle
• Detachable 3-way wall switch keypad, IR “eye” sensor, and RJ45 wired projector trigger
• Wireless 5-12 volt projector trigger through RF remote
• Rises and lowers using scissor-backed cross spring risers
• Tab-tension design helps maintain a flat, ripple-free projection surface
• Includes USB rechargeable IR and RF remotes

Related Questions and Answers

Q: 1. How Mini P can support smartphone, action camera and compact camera? it is amazing!

A: Yes, the Moza Mini-P is very versatile, giving the flexibility of supporting all of the above (smartphones, action cameras, and compact cameras) between 0.3 and 2 lbs in weight.

Q: 2. Can this unit be adapter to a wireless controller or is there a next step up that would not brak the bank?

A: I would think that it would take quite a bit of work to make it work wirelessly. There are 2 cables that it uses. One for the pan motor & the other for the tilt motor. They send a varying voltage to the motors to control the speed they move the cameras.

Q: 3. I recently purchased a zoom F4. When I plugged in one of my laveliers it seems only one side is working. So I plugged in the other lavelier and get the same result. To make sure it's not my headset , I listened to pre-recorded music.My headset are ok. So I also checked to make sure nothing is panned on the zoom f4. I haven't used my laveliers hardly at all over a few years. Then it was only once. Weird?

A: I would check and make sure you have mono mix on for the Zoom, and it's taking the XLR channels individually, not trying to do anything with a stereo mix which might have caused your one channel in headphones.

Q: 4. is there a demo video?

A: There are no official videos. However, an internet search will show consumer videos regarding the head. Unfortunately, we cannot vouch for these videos.

Q: 5. Is there a external rechargeable power unit for remote locations?

A: It doesn't, so I purchased a Goal Zero YETI portable battery power source. I actually have 2 of them, the 150 and the 400 (for extended use). They both work well and give the Gimbal plenty of power.

Q: 6. Can this be used with iPhone and Moment lenses?

A: Yes, there should be no issues with such pairings.

Q: 7. Will this work on O'Connor 35L legs?

A: Sorry, no. The correct spreader for the OConnor 35L legs has the part number of 334-130. Unfortunately it is no longer available from B&H or OConnor. Hopefully you can find it on the secondary market. Here is what you are looking for: http://bit.ly/2zpdJdF. If all else fails, you can get a 4'x4' piece of short pile carpet and put the tripod on that whenever you are on a floor or concrete. (You do not need a spreader if you are on grass, dirt or sand.)That is a trick used use Hollywood crews for generations.

Q: 8. Is this a true gimbal. If I mount this at the top of a pole will it stay level if the pole base is not?

A: The mount or pole needs to be plumb and level in order for this device to work properly.

Q: 9. Does this work with the Iphone SE2 and the Insta360 1R camera?

A: Yes, this will work with both.

Q: 10. Does this floor spreader compatible with the older O'Connor 25L series as well?

A: It is our opinion that the 25L can only work with it's own spreader, the Mid-Level Spreader (#33G-100). Unfortunately that spreader, like the tripod itself, is discontinued. Internet searches did not turn up any examples of it being available. We feel that the Floor Spreader for 30L / 60L Tripod won't work because the 25L's feet are not the inverted U shape that is needed to interface with this Sachtler designed floor spreader. (OConnor and Sachtler are owed by the same company thus their products are sometimes intertwined.)