You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Polymaker 2.85mm Polylite Pla Filament 1kg Orange

Polymaker 2.85mm Polylite Pla Filament 1kg Orange
  • Product Code: eq155036
  • Availability: In Stock

$65.97 $103.57

Whether you are a seasoned creator or new to the world of 3D printing, the Polymaker 2.85mm PolyLite PLA Filament 1kg Orangeenables you to explore your imagination, bringing your designs to life.

Derived from corn starch or sugar cane, this Polylactic Acid (PLA) material provides a recyclable, natural, thermoplastic polyester suitable for printing a litany of creations. Featuring Polymaker's Jam-Free technology, you can experience less stops and interruptions during your printing process, streamlining production. PolyLite PLA has a printing speed range between 40 to 60mm/s and a temperature range of 374 to 446°F. This filament supports direct and indirect drive systems with a retraction distance and speed of 1mm at 20mm/s and 3mm at 40mm/s, respectively. Each spool and box are made from recycled material, ensuring a positive impact on the environment.

2.85mm Filament Diameter    1kg Weight    Polymaker Jam-Free Technology    40-60mm/s Printing Speed Range    374-446°F Temperature Range    Direct & Indirect Drive Compatible    Support for Heated Beds

Parameters
Filament Diameter2.85 mm
Filament MaterialPLA
ColorOrange
Weight2.2 lb / 1 kg
Packaging Info
Package Weight2.875 lb
Box Dimensions (LxWxH)9 x 8.8 x 2.8"

Related Questions and Answers

Q: 1. Is there a waterproof cover available for Sling III from Lowe or a third party?

A: I'm sorry but there is no waterproof cover available for the Lowepro Sling.

Q: 2. Does the bag have adequate padding inside to protect the camera and tablet?

A: it's for urban and travel purposes. as such the bag is very versatile and expandable, but only the portion to hold the camera and tablet has padding and that padding is fairly light. it's not intended to be thrown on the ground, but i have no fears for the safety of my equipment when used as intended. Perfect for mirrorless camera with a lens attached and an additional lens or flash. If you intend to use the expanded section for equipment you need to have it either in a padded case like those that come with most flashes or binoculars or a padded lens case. You can also fit another padded storage compartment in the expanded section for equipment not kept in cases. like i said very versatile bag for MFT/mirrorless.

Q: 3. Will this tripod work with a Sony SLT-A77V?

A: It Works with my A7II and a long lens. The tripod is so light that I won't let go of the camera when it is mounted. Certainly not when extended.

Q: 4. will my fuji xt4 , 50-140 lens and 16-55 lens --fit in this bag?

A: No, this bag is too small.

Q: 5. How does the twist-lock mechanism hold up over time? I photograph at the beach a lot and am worried about sand.I'm not very familiar with ball-heads - will they support my Bronica SQ ok? (It's under 8 pounds).

A: For my experience, I have a Fujifilm X-E1 with a telephoto lense and flash attachment. Altogether I don't think there are more than 8 pounds of load, but I like the twist-lock mechanism and its convenience. It's been holding up quite well for my hiking and mountain bike trips. I have gotten it wet with sand a few times and I usually wipe everything down after removing the parts. The thing you'll have to be careful is water, they tend to sip inside the legs where you twist to loosen it for extension, as that motion might bring water further in. I do say removing everything and putting it back together will do, but it's a 10-15 minutes task - but hey, it's all for keeping the equipment in good shape!

Q: 6. I would be carrying a Canon 50D with a battery grip, and two lenses. Anyone know, 1) if this could reasonably accommodate a DSLR with a battery grip, and 2) if you could actually carry a flash and an extra lens for a total of body, 2 lenses and flash?

A: I carry a Nikon D5300 which is a smaller body with an 18-300mm f3.5 lens with lens facing up in the bag, can also carry a flash and another lens. The width of the bag is not very wide, so may be tight for a camera with battery grip and if a large lens attached to it.

Q: 7. Is there enough room for NIKON D300 with 28-70 lens attached, Leica with 50mm lens attached, and Zeiss distagon 25mm ? Also, does it fit under the airplane seat?

A: Room for the camera gear - but doubtful it will fit under an airplane seat.

Q: 8. Will a Nikon D750 with an 85mm prime lens attached fit? If so, will an extra small lens also fit?

A: Yes you can fit a Nikon D750 with a Nikon 85mm lens into this bag.

Q: 9. Wondering how long the adjustable shoulder strap is?

A: Very long and adjustable total length is 49 inches.

Q: 10. Will Canon EOS 7D with 15-85 IS + 50MM 1.8+ Speedlite 600EX-RT + Extra Battery will fit into it?

A: I fit a camera of comparable size and lenses in the bag - Nikon D800. You'll be able to fit the camera and either an additional lens OR a speedlite inside the bag. There is an additional pouch outside the bag. I fit a water bottle in this pouch. It's not secure though so you may not be comfortable placing expensive equipment in it. Additionally, the padded liner inside can be removed to create more space. I take out the padding when I'm shooting with a battery pack/grip on.

28/09/2024

[PLA] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint

5
22/09/2024

[Orange] Cheap and works great in my bambu labs AMS on my X1C

5
27/08/2024

[2.85 mm] Works great in my Ender 3S1

5
21/08/2024

[2.875 lb] Pinky has been in my front lawn for about 6 months. This Pink is the best Pink PLA for Pinky.

5
15/08/2024

[Orange] Clyde has been out for 6 months under various weather conditions. This Orange PLA turned out great for Clyde.

5
13/08/2024

[2.875 lb] Another excellent Creality product!

5
13/07/2024

[2.875 lb] This material is one of my hands down favorites. The color intensity is truly a charcoal black. To me, it beats all other silk materials because of its light diffusing properties. Its rough to the touch and doesn't have the dry time CF does. Fantastic material and I will keep buying it again and again

5
04/07/2024

[9 x 8.8 x 2.8"] Literally no reason to have this material, but its so fun. It glows bright and as expected, making stars, fidgets, light covers, what a blast.

5
26/06/2024

[2.85 mm] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed.

5
23/06/2024

[9 x 8.8 x 2.8"] This took two spools of yellow to create this basketball size Pac Man for my front yard garden. This yellow PLA turned out great and has weathered for about 6 months with no discoloration.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Lanparte Dslr Kit V2 - No Battery & Monitor

$6,432.21 $10,034.25

Crown Audio Dci 2/300 2-channel Amplifier 300w

$4,860.00 $6,512.40

Marshall Cv730 Uhd 4k60 Ip Ptz Camera 30x Zoom

$6,840.00 $9,781.20

Sachtler Vario Ped 2-80 Tripod System

$94,335.00 $140,559.15

Universal Led Tv Remote Control

$1,119.00 $1,633.74

Zeiss Cp.3 15mm T2.9 Prime Lens Pl Mount

$18,270.00 $27,039.60

Lg 55uh5n-e 55" Uhd 4k Commercial Monitor

$5,280.00 $7,814.40

Pelican 1615airwd Hard Case With Divider Insert

$1,513.20 $1,891.50