Polymaker 2.85Mm Polylite Pla Filament 1Kg Purple

Polymaker 2.85mm Polylite Pla Filament 1kg Purple

Product Code: eq155037
Availability: In Stock

$48.72 $61.87

Qty

9 reviews Write a review

Description
Reviews (9)

Whether you are a seasoned creator or new to the world of 3D printing, the Polymaker 2.85mm PolyLite PLA Filament 1kg Purpleenables you to explore your imagination, bringing your designs to life.

Derived from corn starch or sugar cane, this Polylactic Acid (PLA) material provides a recyclable, natural, thermoplastic polyester suitable for printing a litany of creations. Featuring Polymaker's Jam-Free technology, you can experience less stops and interruptions during your printing process, streamlining production. PolyLite PLA has a printing speed range between 40 to 60mm/s and a temperature range of 374 to 446°F. This filament supports direct and indirect drive systems with a retraction distance and speed of 1mm at 20mm/s and 3mm at 40mm/s, respectively. Each spool and box are made from recycled material, ensuring a positive impact on the environment.

2.85mm Filament Diameter 1kg Weight Polymaker Jam-Free Technology 40-60mm/s Printing Speed Range 374-446°F Temperature Range Direct & Indirect Drive Compatible Support for Heated Beds

Parameters
Filament Diameter	2.85 mm
Filament Material	PLA
Color	Purple
Weight	2.2 lb / 1 kg

Related Questions and Answers

Q: 1. this work with swann dvr ?

A: I believe yes. I have an older Samsung DVR that came with a 500 meg hard drive. The new 1 terabyte drive worked perfectly OK right out of the box.

Q: 2. Will this hard drive only work for surveillance system?

A: This was one of the hard drives my NVR manufacture recommended. It has worked exceptionally well. I would highly recommend it but Im afraid I cant answer your question. Perhaps a computer tech would provide an answer. B&H is an excellent company with great customer service.

Q: 3. what is in the bundle? I have seen other bundles that include camera, case, batteries and film

A: In the Box: FUJIFILM INSTAX Mini 11 Instant Film Camera Bundle (Sky Blue) FUJIFILM INSTAX Mini 11 Instant Film Camera (Sky Blue) INSTAX Mini Instant Film (10 Exposures) INSTAX Photo Holder Clip Stand INSTAX DIY Idea Booklet

Q: 4. Is the WD10PURZ a CMR HDD?

A: The WD 1TB Purple 5400 rpm SATA III 3.5" Internal Surveillance Hard Drive (OEM) BH #WEWD10PURZ is CMR.

Q: 5. Are these already formatted for dvr?

A: Yes, mine came formatted. Just plugged it into my NVR and it started recording immediately.

Q: 6. I have a ZOSI dvr for 8 channel. Can this work to record video from them

A: If your recorder uses 3.5 inch drives with SATA connectors, this drive should work just fine. I am 99% sure that your recorder uses SATA drives. Its industry standard. Check the owners manual for maximum supported drive capacity. I know that some recorders have drive size limits and if you install a drive that is of bigger capacity than recorder can support, you may have issues. My Lorex NVR supports two 2TB hard drives and this drive was literally plug-and-play. Good luck.

Q: 7. iS THIS HDD COMPATIBLE WITH THE ZMODO DVR??

A: This is regular BARE drive. If your DVR requires some special embedded software, you need drive from manufacturer of DVR. It works for most of the DVRs I use for.

Q: 8. is this hard drive appropriate to mount in a Lacie Big 2 that will be constantly on?

A: It should work fine. This drive is used in surveillance equipment that is on 24-7.

Q: 9. is this drive compatable with hikvision 4k nvr?

A: Yes the wd purple drives are recommended for use by Hikvision

Q: 10. What is the difference in OEM and Retail other than packaging?

A: What Gary G. stated is accurate. Same everything except no fancy package, no cables, no screws, no software utilities... just the drive.

Daniel	24/08/2024
[PLA] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint 5

Mikel	05/08/2024
[PLA] This Teal PLA turned out great. Inky has been out front for about 6 months under various weather condition and no issues. This turned out to be the best looking Teal for Inky. 5

Daniel	04/08/2024
[2.85 mm] Literally no reason to have this material, but its so fun. It glows bright and as expected, making stars, fidgets, light covers, what a blast. 5

Daniel	24/07/2024
[2.85 mm] This stuff is impressive. It has a much higher tolerance for printing fine pieces. Its sand-able and workable and much more rigid than PLA. It does have some issues I'm finding joints aren't as well supported because of the fiber content versus plastic but once I engineer the model to accommodate, it works amazingly well. 5

Daniel	25/06/2024
[2.85 mm] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed. 5

Daniel	02/06/2024
[2.85 mm] This gold is the same as any other, the color is vibrant and the silk effect works well. Polymaker tends to be my go-to for these types of base material colors because the material works well, and I have the least number of issues for the price point. 5

Mikel	18/05/2024
[2.85 mm] Pinky has been in my front lawn for about 6 months. This Pink is the best Pink PLA for Pinky. 5

Mikel	22/04/2024
[PLA] This took two spools of yellow to create this basketball size Pac Man for my front yard garden. This yellow PLA turned out great and has weathered for about 6 months with no discoloration. 5