Polymaker 2.85Mm Polymide Pa612-Cf Filament 500G Black

Polymaker 2.85mm Polymide Pa612-cf Filament 500g Black

Product Code: eq155061
Availability: In Stock

$82.47 $113.81

Qty

13 reviews Write a review

Description
Reviews (13)

The Polymaker 2.85mm PolyMide PA612-CF Filament 500g Blackis made of carbon fiber reinforced polyamide, which is based on a copolymer of PA6 and PA12. Thanks to its chemical structure, this filament has a lower moisture sensitivity compared to PA6-based materials, and improved mechanical properties compared to PA12-based materials. This filament enhances dimensional stability, thanks to carbon fiber reinforcement and warp-free technology.

2.85mm Filament Diameter 500g Weight Nylon Material

Parameters
Filament Diameter	2.85 mm
Filament Material	Nylon
Color	Black
Weight	1.1 lb / 500 g
Packaging Info
Package Weight	1.81 lb
Box Dimensions (LxWxH)	9.4 x 8.2 x 2.9"

Printing Temperature: 482 - 572°F / 250 - 300°C
Bed Temperature: 77 - 122°F / 25 - 50°C
Printing Speed: 30 - 60 mm/s
Fan: OFF

Direct Drive

Retraction Distance: 3 mm
Retraction Speed: 40 mm/s

Indirect Drive

Retraction Distance: 6 mm
Retraction Speed: 60 mm/s

212°F / 100°C for 8 hours (Only if the material has absorbed moisture)

Related Questions and Answers

Q: 1. Is the case deep enough to use with the hoods attached for the lenses recomended?

A: The case is wide enough to keep the hoods on in reverse. The case is not long enough to have the hood attached for shooting.

Q: 2. Will this fit a Nikon D850 with a 24 f1.8 lens? Will it be snug or will there be some space??

A: According to Nikon's compatibility chart, yes, the Nikon D850 DSLR Camera will fit in the Nikon CF-DC4 Semi-Soft Case with the Nikon AF-S NIKKOR 24mm f/1.8G ED Lens, and will fit stored with the filter, lens cap, and bayonet lens hood in the reverse position.

Q: 3. Does the center column remove in order to have minimum height of 4"?

A: The bottom main section unscrews leaving just the top portion.

Q: 4. What is the diameter of the upper CF legs?

A: Diameter of the first upper leg is; 25mm.

Q: 5. Is center column removable?

A: Yes it is!

Q: 6. Is this case large enough to hold the Nikon D750 with a 24-120mm lens?

A: It holds my D810 wit a 24-70 perfect. I hope this helps!

Q: 7. What is the thread size?

A: This tripod has a reversible screw. One side is 1/4" the other side is 3/8".

Q: 8. Is this made in Thailand or China?

A: This tripod is manufactured in Thailand.

Q: 9. Is the case meant to stay on the strap while shooting?

A: Yes, the case stays on the strap when you are shooting.

Q: 10. What is the diameter of the base plate (where the tripod head attaches)? Will this fit nicely with the Manfrotto BeFree video head (it's base is 40mm)?

A: The base plate is about 2" wide, and would fit the Manfrotto BeFree video head quite nicely on it.

Daniel	28/09/2024
[Black] This stuff is impressive. It has a much higher tolerance for printing fine pieces. Its sand-able and workable and much more rigid than PLA. It does have some issues I'm finding joints aren't as well supported because of the fiber content versus plastic but once I engineer the model to accommodate, it works amazingly well. 5

Daniel	07/09/2024
[1.81 lb] This gold is the same as any other, the color is vibrant and the silk effect works well. Polymaker tends to be my go-to for these types of base material colors because the material works well, and I have the least number of issues for the price point. 5

Thomas	03/09/2024
[1.81 lb] This item arrived quickly from BH Photo. It was packed well with no damage. The storage box is large and can allow 2 1kg rolls or one larger roll to be stored. It has a nice dessicant storage space and humidity guage. It is a bit pricey since you can also get a heated drier/storage box that is less money now days. I just wanted a box without the cord attached. 5

Daniel	19/08/2024
[2.85 mm] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint 5

David	07/07/2024
[Black] Polymaker is one of the best filaments out there and for sure the best company out there I can think of. They do so much good for the community so I'm always more than happy to support them any way I can. This stuff prints like a dream. 5

Daniel	21/06/2024
[1.81 lb] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed. 5

Kris	17/06/2024
[1.81 lb] Easy to get and fast shipping , Thanks! 5

Daniel	15/06/2024
[1.81 lb] This material is one of my hands down favorites. The color intensity is truly a charcoal black. To me, it beats all other silk materials because of its light diffusing properties. Its rough to the touch and doesn't have the dry time CF does. Fantastic material and I will keep buying it again and again 5

Daniel	07/06/2024
[2.85 mm] Literally no reason to have this material, but its so fun. It glows bright and as expected, making stars, fidgets, light covers, what a blast. 5

Mikel	28/05/2024
[Nylon] This took two spools of yellow to create this basketball size Pac Man for my front yard garden. This yellow PLA turned out great and has weathered for about 6 months with no discoloration. 5