The CAMVATE 1/4"-20 to 3/8"-16 Male Spigot 4-Packfrom CAMVATE 1/4"-20 to 3/8"-16 Male Spigot 4-Packhas a 1/4"-20 thread at one end and a 3/8"-16 thread at the other for mounting a variety of grip gear. The kit includes four pieces that are essential for mounting on super clamps or 5/8" receivers.

5/8" Pin Stud, 1/4"-20 & 3/8"-16 Threads    Knurled Center Ring    Nickel-Plated Iron Construction    Fits 5/8" Receivers

• 5/8" baby pin stud for mounting lighting accessories
• 1/4"-20 and 3/8"-16 screws for mounting cameras and other accessories
• Knurled center ring allows for a firm grip when tightening the pin
• Nickel-plated iron construction

Related Questions and Answers

Q: 1. Will this attach a be free fluid head to a magic arm mount?

A: Yes the Manfrotto 3/8" + 3/8" Adapter Spigot can attach to the BeFree head and the Magic Arm.

Q: 2. it looks like it can clamp smaller pipe than specified 1.65 or 42mm. Would this work to hold 30 lbs with a pipe between 1.3 and 1.6 ?

A: Nils, from my experience I would say yes. The cool part with BH is you can return things if they don't work out.The 1.65 is the top end of what the clamp will attach to. I hope this helps!

Q: 3. Is the junior pin steel or aluminum?

A: The Kupo Half-Coupler with 28mm Spigot is aluminum.

Q: 4. will this spigot fit into my PhotoFlex LS-B2320Y stand?

A: Sorry, I don't know. I use it in knuckles (aka gobo heads). They fit those perfectly, and let you use an 3/8 or 1/20-20 threaded attachments.

Q: 5. Could this be used to suspend a westcott flex 1 x 1 as an overhead light?

A: Yes, the MICROgrip Rod can certainly be used to mount a Wescott Flex 1x1. That fixtures weight is 7oz. and will easily be supported.

Q: 6. i will like to know if it will fit on a truss 12''x12''?

A: It depends on the size of the pipe in the truss. This clamp is for pipe 1.65 - 2.0" (42 - 52 mm) in diameter.

Q: 7. What is the smallest and biggest sized pipe that this can fit around?

A: The Avenger C4462 MP Coupler with 5/8" (16 mm) Spigot BH #AVC44621 is compatible with pipes from 1.65 - 2.0".

Q: 8. For the 3/8" -16 rods, they cannot be joined together like the 1/4"-20 rods, right?

A: The Matthews MICROgrip Rod (20") is like the smaller rods but uses a 3/8 inch thread not the smaller 1/4 thread.

Q: 9. Can the spigot be removed and updated to me longer?

A: yes by unscrewing the allen bolt.

Q: 10. Hi Guys, this picture does not seem to reflect a double ended spigot with male threads on either side. Can you verify that the photo is accurate? thank you

A: It doesn't. Male one one end Female on the other