Get the ultimate wind protection in super-windy conditions for your omnidirectional lavalier, field-recording, or headset microphone with the Bubblebee Industries The Windbubble PRO Extreme Long-Haired Fur Windscreen (Black, Large). The PRO Extreme Long-Haired version features longer fur for even more wind-noise protection. There is also an inner foam core for additional wind protection and a special rubber mount, which absorbs shocks and stops the transference of vibrations through to your microphone's capsule. This large-sized Windbubble PRO Extreme Long-Haired windscreen easily fits on microphones with a diameter of 11.5 to 14mm. The package includes two fur windscreens.

Note: The Windbubble PRO Extreme Long-haired is only suitable for omnidirectional microphones. If you have a cardioid/directional microphone, then the original Windbubble is the preferred microphone windshield for your mic.

Wind Protection for Omni Lavalier Mics    Also for Field Recording & Headset Mics    Fits Mics 11.5 to 14mm in Diameter    Inner Foam Core    Long-Haired Multi-Pile Faux Fur    Soft Rubber Mount    Acoustically Transparent

• Shure: WL183, MX183
• LOM: Uši, Uši Pro
• MicBooster: Clippy EM272, Clippy EM264
• Omnidirectional lavalier, field-recording, and headset microphones 11.5 to 14mm in diameter

• Designed for use in super-windy conditions, The Windbubble PRO Long-Haired utilizes a longer version of the company's multi-pile faux fur specially designed with varying lengths of fur to help gradually slow down the wind before reaching the mic.
• The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency.
• The mic's capsule is kept in a calm bubble of wind protection and allowed to perform at its best.
• The Bubblebee fur is less shiny than others to better blend with skin, clothes, and other surrounding materials.

• Unlike hard plastic mounts, The Windbubble PRO's soft rubber mount absorbs shocks and stops vibrations transferring to your mic's capsule.
• In addition, the rubber mount has a slight, conical shape inside, which prevents you to push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity.
• This means that your mic will consistently stay in the best possible position inside the windshield, making it possible to engineer a smaller, overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. 

• The PRO Extreme version is built with an inner foam core surrounded by the multi-pile faux fur to offer you an even greater level of wind protection for your microphone. This is especially helpful on those super-windy exteriors and a perfect solution for ENG and broadcast shoots.

• The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off mid-shoot.

Related Questions and Answers

Q: 1. Is this the new version that will Auto power on when the camera is turned on ?

A: Yes it does. This microphone features an auto-powering feature which keeps you from draining battery when the camera is not in use. When connected to your camera, the VideoMic Pro Plus detects plug-in power from the audio input on compatible cameras, and this signals the microphone to switch on. When the mic detects a loss in power, either from powering off or disconnecting the camera, the mic shuts off.

Q: 2. Is this compatible with Sennheiser ew-100 g3?

A: Yes, they are compatible.

Q: 3. Is this mic compatible with the Sony RX10M3 camera?

A: Yes, the Rode VideoMic Pro Plus is compatible for use with your Sony camera.

Q: 4. What Diameter mic will these clips fit? We have the less expensive AT mics with a 10 mm diameter.

A: The hole is about 6mm so they will probably fit a 10mm lav

Q: 5. Does it have a 3.5 connection? I need a new mic for another brand transmitter?

A: The MINIFUR-LAV by Rode is only a windshield. No mic included. The Rode Lav however which is pictured for reference, features a proprietary connector that allows you to choose the proper connection for a particular transmitter or application. Connectors are available for most popular transmitter brands as well as hardwired XLR and standard 3.5mm. For available connectors see the following link: http://bhpho.to/2aMB6xW

Q: 6. Will these fit Tascam DR-10L?

A: No. We recommend using the Auray Metal Windscreen for Senal OLM2 and Sennheiser ME2 Microphones (5-Pack) which is B&H# AUWLMOLM25. We also have the same windscreen available to purchase individually as B&H# AUWLMOLM2S.

Q: 7. Do these clips work with the mic that comes with the Sony UWP-D11 lav kit?

A: Yes

Q: 8. Do these clips fit the lav mics in the Saramonic Blink 500 kit?

A: Yes, the Auray clips can be used for the lavalier mics that are included with the Blink 500 and Blink 500 Pro wireless systems.

Q: 9. do i need to get a receiver separately for this or it comes with one?

A: The RODE Interview PRO Wireless Handheld Condenser Microphone is compatible for use with the RODE Series IV 2.4 GHz Receiver, which is included with the RODE Wireless GO II, RODE Wireless ME, and RODE Wireless PRO Wireless Microphone Systems. The Interview PRO Microphone is sold as an optional add-on accessory for use with any of these systems.

Q: 10. Will this fit the Rode lavalier go ?

A: Yes, the RODE synthetic mini fur is designed and made for the following unit. RODE LAV RODE LAVALIER-II RODE Link lav RODE RODELink Filmmaker RODE SC6-L RODE Wireless GO II RODE Wireless Go II RODE smartLav RODE smartLav+ Zoom H1 Zoom H1n