Get the ultimate wind protection for you omnidirectional lavalier, field-recording, or headset microphone with the Bubblebee Industries The Windbubble PRO Extreme Fur Windscreen (Gray, Small). The PRO Extreme version features an inner foam core for additional wind protection and a special rubber mount, which absorbs shocks and stops the transference of vibrations through to your microphone's capsule. This small-sized Windbubble PRO Extreme easily fits on microphones with a diameter of 5 to 6.5mm. The package includes two fur windscreens.

Note: The Windbubble PRO Extreme is only suitable for omnidirectional microphones. If you have a cardioid/directional microphone, then the original Windbubble is the preferred microphone windshield for your mic.

Wind Protection for Omni Lavalier Mics    Also for Field Recording & Headset Mics    Fits Mics 5 to 6.5mm in Diameter    Inner Foam Core    Multi-Pile Faux Fur    Soft Rubber Mount    Acoustically Transparent

• Deity: W. Lav
• DPA: 4060, 4061, 4062, 4063, 4466, 4071, 4066, 4166, 4266, 4488, 4188, 4288
• Rode: Lavalier, Lavalier Go, SmartLav+, LINKLav
• Sennheiser: ME 2 (old style with removeable popshield 5.8mm in diameter from G2/G3 series)
• Omnidirectional lavalier, field-recording, and headset microphones 5 to 6.5mm in diameter

• Unlike hard plastic mounts, The Windbubble PRO's soft rubber mount absorbs shocks and stops vibrations transferring to your mic's capsule.
• In addition, the rubber mount has a slight, conical shape inside, which prevents you to push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity.
• This means that your mic will consistently stay in the best possible position inside the windshield, making it possible to engineer a smaller, overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. 

• The PRO Extreme version Extreme' version is built with an inner foam core surrounded by the multi-pile faux fur to offer you an even greater level of wind protection for your microphone. This is especially helpful on those super-windy exteriors and a perfect solution for ENG and broadcast shoots.

• The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off mid-shoot.

• The Windbubble PRO utilizes the company's multi-pile faux fur specially designed with varying lengths of fur to help gradually slow down the wind before reaching the mic.
• The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency.
• The mic's capsule is kept in a calm bubble of wind protection and allowed to perform at its best.
• The Bubblebee fur is less shiny than others to better blend with skin, clothes, and other surrounding materials.

Related Questions and Answers

Q: 1. Hi, I just bought this mic with the deadcat combo, when I fit the deadcat to mic there seems to be about 1/2 inch of space towards the front of the mic that doesn't touch the inside wind reduction sponge. is this normal? or did I get too long of a cat with my combo/kit?

A: You need to ease it on like a tight pair of socks. Slowly and gently.

Q: 2. I heard reports of people listening to clicks on recordings with Videomic Pro when shooting with smartphones. Why does this happen and how do I correct it?

A: Hello Marcelo, unfortunately, there are many reasons why this could be happening. Most of them don't have to do with any microphone manufacturer. The best solution would be to contact Rode directly to speak with someone over the phone to work out details.

Q: 3. Will this fit the Rode lavalier go ?

A: Yes, the RODE synthetic mini fur is designed and made for the following unit. RODE LAV RODE LAVALIER-II RODE Link lav RODE RODELink Filmmaker RODE SC6-L RODE Wireless GO II RODE Wireless Go II RODE smartLav RODE smartLav+ Zoom H1 Zoom H1n

Q: 4. Is it compatible with the Canon Vixia G40?

A: I use it with a Canon 70D and its great. If the G40 has a mic input I'd say yes.

Q: 5. Can two of the Rode Interveiw Pros connect to one Wireless Go II receiver?

A: Yes, two units of the RODE Interview PRO Wireless Handheld Condenser Microphone can be connected to a single RODE Wireless GO II receiver at the same time.

Q: 6. Hello, are they any difference in sound quality between the one with the rubber band mount vs this rycote version? Thanks!

A: Not sure if there's a big difference as far as sound quality while still on a tripod or boom stand. But if your a run and gun type person, then the shock mount on this mic helps a ton!

Q: 7. I have a RODE VideoMic (not Pro) that I mount on my camera's hot shoe. I find when I look through the viewfinder that the rear of the microphone assembly is pushing against my forehead. It's not comfortable, it defeats the damping effect of the mount, and I can't get my eye fully up to the viewfinder. Is the clearance the same on the Pro? Any suggestions on how to mount the mic further forward to avoid this problem?

A: You could simply add a small extention to the camera shoe to move the mic forward a bit. . https://www.bhphotovideo.com/c/product/752863-REG/Vello_SE_10_SE_10_Hot_Shoe_Extension.html

Q: 8. How far from subject can mic be placed from subject before too much noise?

A: Hello Kevin, the TX-M2 transmitter operates up to 100 meters/328 feet. Note that this is under perfect conditions and best practices include good line of sight, limiting WIFI interference, and keeping a well charged battery.

Q: 9. I received this microphone and I was hoping to use it on top of my Sony Handycam. Unfortunately, it is not the same type of fitting. I can't find an adaptor. Any thought? (Aside of using one of those mounts)

A: To mount the Rode VideoMic Pro to a Sony Handycam or similar camcorder will require a mounting bracket. The Vello CB-510 is a recommended mount.

Q: 10. Can it be connected to rodecaster duo via wireless connection?

A: The RODE TX-M2 Handheld Wireless Microphone can only be wirelessly connected to RodeLink wireless mic receivers (Rode RX-CAM). That is how you would establish a wireless connection, and then the receiver can be physically connected to an audio interface such as the RodeCaster Duo.