Get the ultimate wind protection for you omnidirectional lavalier, field-recording, or headset microphone with the Bubblebee Industries The Windbubble PRO Fur Windscreen (Beige, XS). The PRO version features a special rubber mount, which absorbs shocks and stops the transference of vibrations through to your microphone's capsule. This XS-sized Windbubble PRO easily fits on microphones with a diameter of 3 to 5mm. The package includes two fur windscreens.

Note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a cardioid/directional microphone, then the original Windbubble is the preferred microphone windshield for your mic.

Wind Protection for Omni Lavalier Mics    Also for Field Recording & Headset Mics    Fits Mics 3 to 5mm in Diameter    Multi-Pile Faux Fur    Soft Rubber Mount    Acoustically Transparent

• Countryman: B3, B6, E3, E2, E6, H6
• DPA: 6060, 6061, 6066, 4466
• Sanken: COS-11 without metal popshield, COS-11D-HWM
• Sennheiser: MKE 1, MKE 2, HSP 2, HSP Essential Omni
• Sony: ECM-88, ECM-90
• Omnidirectional lavalier, field-recording, and headset microphones 3 to 5mm in diameter

• Unlike hard plastic mounts, The Windbubble PRO's soft rubber mount absorbs shocks and stops vibrations transferring to your mic's capsule.
• In addition, the rubber mount has a slight, conical shape inside, which prevents you to push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity.
• This means that your mic will consistently stay in the best possible position inside the windshield, making it possible to engineer a smaller, overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. 

• The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off mid-shoot.

• The Windbubble PRO utilizes the company's multi-pile faux fur specially designed with varying lengths of fur to help gradually slow down the wind before reaching the mic.
• The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency.
• The mic's capsule is kept in a calm bubble of wind protection and allowed to perform at its best.
• The Bubblebee fur is less shiny than others to better blend with skin, clothes, and other surrounding materials.

Related Questions and Answers

Q: 1. I have a RODE VideoMic (not Pro) that I mount on my camera's hot shoe. I find when I look through the viewfinder that the rear of the microphone assembly is pushing against my forehead. It's not comfortable, it defeats the damping effect of the mount, and I can't get my eye fully up to the viewfinder. Is the clearance the same on the Pro? Any suggestions on how to mount the mic further forward to avoid this problem?

A: You could simply add a small extention to the camera shoe to move the mic forward a bit. . https://www.bhphotovideo.com/c/product/752863-REG/Vello_SE_10_SE_10_Hot_Shoe_Extension.html

Q: 2. Will this work on a Nikon D90 or 750

A: The Nikon D90 does not have a mic input. However the D750 does, you will be able to use this microphone with the Nikon D750.

Q: 3. How far from subject can mic be placed from subject before too much noise?

A: Hello Kevin, the TX-M2 transmitter operates up to 100 meters/328 feet. Note that this is under perfect conditions and best practices include good line of sight, limiting WIFI interference, and keeping a well charged battery.

Q: 4. Can it be connected to rodecaster duo via wireless connection?

A: The RODE TX-M2 Handheld Wireless Microphone can only be wirelessly connected to RodeLink wireless mic receivers (Rode RX-CAM). That is how you would establish a wireless connection, and then the receiver can be physically connected to an audio interface such as the RodeCaster Duo.

Q: 5. Can I replace the 3.5 mm cable since it's demadged?

A: The attached 3.5mm TRS cable is not user replaceable. Please contact RØDE directly for repair: RØDE: Tel: (562) 364-7400 or (888) 412-4664 Email usasupport@rodemic.com

Q: 6. Can two of the Rode Interveiw Pros connect to one Wireless Go II receiver?

A: Yes, two units of the RODE Interview PRO Wireless Handheld Condenser Microphone can be connected to a single RODE Wireless GO II receiver at the same time.

Q: 7. I have this mic but with the old mount with rubber bands. Is the Rycote Lyre Shockmount compatible with the old mic and if so is it available by itself?

A: It's not technically compatible, but after seeing Phillip Bloom do this I also bought the Lyre and mounted my original Rode VideoMic Pro on it and have used it for the last 5 years without issue. https://www.magiclantern.fm/forum/index.php?topic=19627.0

Q: 8. I received this microphone and I was hoping to use it on top of my Sony Handycam. Unfortunately, it is not the same type of fitting. I can't find an adaptor. Any thought? (Aside of using one of those mounts)

A: To mount the Rode VideoMic Pro to a Sony Handycam or similar camcorder will require a mounting bracket. The Vello CB-510 is a recommended mount.

Q: 9. Would this be fully compatible with Linux as well? if not, what would be missing?

A: The Mackie DLZ Creator XS Adaptive Digital Streaming Mixer is currently not compatible with Linux computers.

Q: 10. Does it have a 3.5 connection? I need a new mic for another brand transmitter?

A: The MINIFUR-LAV by Rode is only a windshield. No mic included. The Rode Lav however which is pictured for reference, features a proprietary connector that allows you to choose the proper connection for a particular transmitter or application. Connectors are available for most popular transmitter brands as well as hardwired XLR and standard 3.5mm. For available connectors see the following link: http://bhpho.to/2aMB6xW