The Bubblebee Microphone Foam for Shotgun Mics, Extra-Largefrom Bubblebee Microphone Foam for Shotgun Mics, Extra-Largeis designed for your extra-large shotgun microphone with 0.87" diameter to help protect against light wind disturbance and vocal plosives. With an acoustically transparent design made from lightweight, open-cell foam, the windscreen is effective at eliminating unwanted vocal plosive and swooshing from boom maneuvers. The windscreen's low profile makes it ideal for run-and-gun journalism, narrative and documentary film, or sports videography.

For Extra-Large Shotgun Microphones    Accommodates Larger Mic Diameters    Reduces Wind Noise    Prevents Vocal Plosives    Acoustically Transparent Design

Sennheiser MKH 30, MKH 40, MKH 50

Related Questions and Answers

Q: 1. Is there space to hold 2 mic clips?

A: You may be able to fit small mic clips in the pocket of the K-Tek Stingray Microphone Case for Two Short Shotgun Mics. The interior of the case is 6.75 x 2.4" and the diameter of a shotgun microphone is approximately 0.83 to 0.87" (21 to 22mm).

Q: 2. Is the foam glued inside or can I take it out?

A: The interior foam padding of the Alfa Case 18.5" MicTube Shotgun Microphone Case, Large (BH # AL20018MTLB) is tack glued.

Q: 3. Is this compatible with a Sennheiser MKH 8060 with no filter modules?

A: Hi Tony. Yes, that's the one to go for for 8060 + MZX (no MZF filter module). MF.

Q: 4. Can I use this with a Rode NTG5?

A: Yes, the Rycote 12cm Super-Softie is compatible for use with a Rode NTG5 microphone.

Q: 5. It's compatible whit Deity S mic 2s?

A: No. The Rycote 033202 Super Softie Windshield for Shotgun Mic (5.9" Long, 0.7 to 0.9" Diameter) is too long for use with the Deity S-Mic 2S Short Shotgun Microphone. The S-Mic 2S is 5.83" (148mm) long and the inside depth of the windshield is 5.9" (150mm) long, so which is longer than the length of the microphone. The Rycote 033201 Super Softie Windshield for Shotgun Mic (4.7" Long, 0.7 to 0.9" Diameter) [B&H # RYSS12M] would be a better option. The inside depth of this windshield is 4.7" (120mm).

Q: 6. Is there any difference between this and LastoLite?

A: If you are comparing the Lastolite Skylite Rapid Extra Large Kit (10 x 10'), B&H # LALR83344R, to the Manfrotto Extra Large Pro Scrim All-in-One Kit (9.5 x 9.5') listed above, the Lastolite kit would be slightly larger in size. The Manfrotto kit would include two (2) grip heads and two (2) ears which would allow you to connect the scrim to light stands, whereas these accessories would need to be purchased separately to connect the Lastolite scrim to a light stand.

Q: 7. Can i use this with DPA4017B ?

A: Better to use this longer version: Rycote Super Softie Windshield for Shotgun Mic (5.9" Long, 0.7 to 0.9" Diameter) B&H # RYSS15M DPA Microphones 4017B Shotgun Microphone B&H # DP4017B Dimensions ø: 0.75 x L: 8.35" / ø: 19 x L: 212 mm

Q: 8. how to assemble extra large lite dome?

A: This litedome was a bit challenging to assemble. Make sure you ordered the correct assembly for your strobe brand (purchase separately). First snap the medal rods together and insert the rods in the corners of the softbox skin , insert the square peice of cloth inside softbox. second unvelcro the corner ends of the softbox (I didnt figure this out until I was done). Third insert the rods in the holes of the strobe assembly, close velcro corners .

Q: 9. Can Sennheiser MKE 600 fit in this?

A: Hi there,It's not our official recommendation; however, you should (just about) be able to get away with an MKE 600 in the Super-Shield, Medium, since it's only 6mm over our recommended length. We would still recommend the Large, though!If in doubt, it might be an idea to bring the mic along to a dealer and try it inside the Medium, since everyone's needs are different.

Q: 10. Are Super softies made for 18" microphone like Audio Technica AT8015 ?

A: This Rycote 18cm Super-Softie Wind Shield for Shotgun Mics (Standard Hole) is only rated for mics up to 7" in length and 0.748 to 0.87" in diameter.