Polymaker 2.85Mm Polysmooth Filament 750G Pink

Polymaker 2.85mm Polysmooth Filament 750g Pink

Product Code: eq155294
Availability: In Stock

$74.97 $114.70

Qty

15 reviews Write a review

Description
Reviews (15)

The Polymaker 2.85mm PolySmooth Filament 750g Pinkis designed for hands-free post processing. PolySmooth is PVB based, which is more hygroscopic than PLA, so it requires a dry box. However, it can be post processed very easily with IPA for a smoother surface finish.

2.85mm Filament Diameter 750g Weight PVB-Based Material

Parameters
Filament Diameter	2.85 mm
Weight	1.7 lb / 750 g

Printing Temperature: 374 - 428°F / 190 - 220°C
Bed Temperature: 77 - 158°F / 25 - 70°C
Printing Speed: 30 - 60 mm/s
Fan: ON

Direct Drive
Retraction Distance: 1 mm
Retraction Speed: 20 mm/s

Indirect Drive
Retraction Distance: 3 mm
Retraction Speed: 40 mm/s

122°F / 50°C for 12 hours
(Only if the material has absorbed moisture)

Related Questions and Answers

Q: 1. Do these work with the Ikelite 8inch dome?

A: This is compatible with all Ikelite DSLR ports.

Q: 2. I tried the v1 strap, but it seems large for my mirror less body. Does the v2 strap fit smaller mirrorless cameras better than the v1?

A: The Spider Camera Holster SpiderPro Hand Strap V2 fits best with larger mirrorless camera bodies.

Q: 3. What is the collapsed size of this phone stand?

A: The GEOMETRICAL Carbon Fiber Pocket Tripod Pro with Adapter Kit (Matte Black) is 2.29mm thick with the dimensions of a standard credit card at 2.1 x 3.4".

Q: 4. Does it come in other colors?

A: This case comes in black, dark brown, pink, and hot pink, in different sizes.

Q: 5. Will this work with a Nikon Z9?

A: Yes, the Spider Camera Holster SpiderPro Hand Strap V2 will work on a camera even if it has a vertical grip like the Nikon Z9 Mirrorless Camera.

Q: 6. Will it work with the OM1 mk2 ?

A: Yes, the Spider Camera Holster SpiderPro Hand Strap V2 (Red) can be attached on the OM SYSTEM OM-1 Mark II Mirrorless Camera.

Q: 7. The first line of the instructions says Select either iOS or Android on the handle Where is the switch to make this selection? It doesn't show up to be paired in Bluetooth on my phone.

A: Use the shutter button on the handle.

Q: 8. Will this work on Nikon ZF?

A: The Spider Camera Holster SpiderPro Hand Strap V2 is compatible with the Nikon ZF.

Q: 9. Will the Spider hand strap work with Sony Cybershot RX10M4?

A: Yes, The Spider Camera Holster SpiderPro Hand Strap V2 will accommodate the Sony Cyber-shot DSC-RX10 IV but i snot ideal as the eyelets sit on the side of the camera.

Q: 10. Does it work w/ the iPhone 7+?

A: Yes it will. The clamp open to 4 and the iPhone 7 plus without a case is 3.07 .

Mikel	07/09/2024
[2.85 mm] Clyde has been out for 6 months under various weather conditions. This Orange PLA turned out great for Clyde. 5

Daniel	06/09/2024
[2.85 mm] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed. 5

Mikel	22/08/2024
[2.85 mm] This Teal PLA turned out great. Inky has been out front for about 6 months under various weather condition and no issues. This turned out to be the best looking Teal for Inky. 5

Daniel	12/08/2024
[2.85 mm] Literally no reason to have this material, but its so fun. It glows bright and as expected, making stars, fidgets, light covers, what a blast. 5

Thomas	05/08/2024
[2.85 mm] This item arrived quickly from BH Photo. It was packed well with no damage. The storage box is large and can allow 2 1kg rolls or one larger roll to be stored. It has a nice dessicant storage space and humidity guage. It is a bit pricey since you can also get a heated drier/storage box that is less money now days. I just wanted a box without the cord attached. 5

Daniel	03/08/2024
[2.85 mm] This gold is the same as any other, the color is vibrant and the silk effect works well. Polymaker tends to be my go-to for these types of base material colors because the material works well, and I have the least number of issues for the price point. 5

David	06/07/2024
[2.85 mm] Polymaker is one of the best filaments out there and for sure the best company out there I can think of. They do so much good for the community so I'm always more than happy to support them any way I can. This stuff prints like a dream. 5

Daniel	01/07/2024
[2.85 mm] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint 5