View your SMPTE 2110 IP broadcast signal to HDMI displays with this Blackmagic IP to HDMI Converter 2110 Minifrom Blackmagic Design. The converter allows you to monitor SMPTE 2110 IP camera signals with up to UHD 4K resolution with audio on an HDMI display. It features a 10G Ethernet port that inputs SMPTE 2110 IP video and supports up to 16 channels of audio.

Because of its ultra-compact size, the unit can be mounted right onto your display or monitor cage. It can also be connected to a computer using USB-C for firmware updates and setup. It can be powered using the included power supply, or it supports PoE++ on a supported network.

2110 IP to HDMI Converter    Video Monitoring To/From Studio Cameras    Supports UHD 4K Video via SMPTE 2110 IP    Windows/macOS Software Utility    PoE++ and 10G Ethernet Power

• This model is designed for connecting a large-screen television or computer monitor to SMPTE-2110 IP systems
• The ultra-compact design means you can mount it behind the display or on a monitor cage
• The unit supports all SD, HD, and UHD 4K video standards up to 2160p60
• It has a standard 10G RJ45 Ethernet connection, so you can use regular Cat-6 Ethernet cables The converter can be powered via Ethernet (PoE), so you don't even need to connect the power
• A DC power supply is included

Related Questions and Answers

Q: 1. Does this work with Sony FS700, SDI 3G out, 12 bit out ?

A: It handles both 6G and 3G SDI. We use it with our 3G video equipment to use cheaper HDMI projectors, so it should work with your 3G camera, but we don't have that model to say for certain.

Q: 2. Will this convert PTZ Move 4k camera to SDI video?

A: No, the Blackmagic Design 2110 IP Converter 8x12G SFP does not convert PTZ Optics Move 4k camera to SDI video.

Q: 3. Would you be able to use two of these to create a point to point system instead of hooking into a network?

A: Yes, you can use two Blackmagic Design 2110 IP Mini BiDirect 12G Converter to create a point to point system.

Q: 4. Can this product convert or decode srt, tcp, rtsp transmissions from other systems? Like the teradek bond backpack or a live u?

A: The Blackmagic Design 2110 IP Mini BiDirect 12G Converter is not able to convert or decode SRT, TCP, or RTSP transmissions. It is designed to be used in studio environments with SMPTE-2110 IP systems.

Q: 5. Can I leave this unit plugged in?

A: Most of the racks that we install for clients are left on, but plugged into a battery backup/surge protector.

Q: 6. Can I connect this black magic box to an SMPTE 2110 network switch and output SDI video from it?

A: Yes, the Blackmagic Design 2110 IP Converter 8x12G SFP has eight SMPTE-2110 SFP IP fiber ports for ingesting SMPTE 2110 signals and will then convert the signal so that it can be output as SDI.

Q: 7. Can this converter perform the same functions as the Blackmagic Design Studio Converter (just for 8 cameras instead of one) ?

A: No, the Blackmagic Design 2110 IP Converter 8x12G SFP does not sever exactly the same purpose as the Blackmagic Design Studio Converter (BH #BLSCN). The Blackmagic Design Studio Converter can intake a signal via 10G Ethernet, which provides power and tally/coms support, where as the Blackmagic Design 2110 IP Converter 8x12G SFP is a signal convertor for sending 8 camera feed over longer distances, so the inputs are SDI can the SFP ports are for transmission to a receiver.

Q: 8. Can this unit allow for color tweaking in the ATEM Control Software with the ATEM Mini?

A: No it does not pass the necessary data from SDI to HDMI.

Q: 9. Is a separate SFP network connection required for each channel of video?

A: Yes, the Blackmagic Design 2110 IP Converter 8x12G SFP will require an SFP for each channel of video.

Q: 10. What's the maximum length the cat6 cable will be able to run?

A: When using the Blackmagic Design 2110 IP Mini BiDirect 12G Converter along with Cat 6A cable, you can do a run of approximately 100 meters.