You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Leica R 19mm V2 Simmod Front Ring 85mm 82mm Filter

Leica R 19mm V2 Simmod Front Ring 85mm 82mm Filter
  • Product Code: eq155569
  • Availability: In Stock

$147.00 $232.26

Add a filter thread and a standard outer diameter to your lens using the Leica R 19mm v2 Simmod Front Ring 85mm 82mm Filterfrom Simmod. This dedicated ring with a knurled edge mounts on your lens using the three included set screws. It enables you to use 82mm threaded filters and 85mm-mount matte boxes or shades.

For Leica R 19mm f /2.8 v2 Lens    Adds 82mm Filter Thread    85mm Outer Diameter    Works with 85mm Matte Box or Shade    Knurled Edge, Set Screw Mounting    May Vignette with Full-Frame Sensors

Parameters
Filter Size Supported82 mm
Mount TypeScrew
Dimensionsø: 3.3 x " / ø: 85.0 x  mm
Packaging Info
Package Weight0.045 lb
Box Dimensions (LxWxH)5.85 x 5.4 x 0.6"

Related Questions and Answers

Q: 1. Will this fit the Leica Q with Leica handgrip?

A: I think it would. There is a little room side to side. However, if you're going to add the finger loop to the handgrip then I don't think so.You might want to check out Lowpro Adventura SH 100 II or something like that. A lot cheaper. I didn't find that until after I already bought this.

Q: 2. please, would this fit a Lumix DMC-FMZ300?

A: The Leica Neoprene Case with Short Front is too small for the Panasonic Lumix DMC-FZ300 Digital Camera.

Q: 3. Will this also work with the MB-T03?

A: No it will not.

Q: 4. Does this work with the SEL2870 Lens?

A: This lens cap is too big for the 28-70mm lens. You need the ALC-F55S lens cap for that lens. https://www.bhphotovideo.com/c/product/850516-REG/Sony_ALC_F55S_ALC_F55S_55mm_Front_Lens.html

Q: 5. Would this fit the Leica CL with the 23mm Lens?

A: This case can fit a Leica CL with a 23mm, but it will be a looser fit.

Q: 6. What is the 85mm adapter ring for? I can find no lens anywhere with that size. What am I missing?

A: The size of 85mm is a Front Diameter for some lenses. It will clamp on to the outer portion of the lens with an 85mm front diameter.

Q: 7. Will the Leica D Lux (typ 109) with handgrip fit into the neoprene case with short front?

A: No. This neoprene case ls nat fit DLuxBut leica M type.

Q: 8. I am looking for the adapter ring to use this donut with my 4x4 Cavision matte box. Can anyone point me to that adapter?

A: Since Cavision Matte Boxes come in different sizes, please email us with your request stating which Matte Box you have so that we can get you the right adapter. provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a

Q: 9. Would this work on the SEL2870 Lens?

A: No, the Sony 28-70 adapts to 55mm lens caps only. Please review the following item for your lens cap needs. Sony ALC-F55S 55mm Front Lens Cap BH #SOALCF55S • MFR #ALC-F55S https://www.bhphotovideo.com/c/product/850516-REG/Sony_ALC_F55S_ALC_F55S_55mm_Front_Lens.html?sts=pi

Q: 10. Is this compatible with Alexa 35?

A: Simmod does not state that the Simmod Canon FD Lens to ARRI PL Mount is compatible with the ARRI ALEXA 35.

03/07/2024

[0.045 lb] I have so many vintage lenses and I want to convert them all into LPL mount. And I love and trust Simmod. This adapter is expensive, yes, should it worth this much? No. But it’s made of very high quality materials. Not sure if it’s the L mount or this adapter but it wiggles just a tiny bit. Tiny but it’s there. Doesn’t bother me. My next step will be getting their conversion kit for FD SSC lenses. Then this expensive purchase will become more valuable. Also, super happy that Simmod partnered with BH! This way I can get all the simmod parts, accessories with free shipping and no tax with Payboo!

5
03/07/2024

[0.045 lb] Having dealt with adapters over many years, you know that nothing comes close to a PL mount (don't get me started on positive lock EF, not even close... plus even Canon has kicked EF to the curb). LPL now takes PL and makes it literally bigger and better. For whatever reason, changing PL lenses always took a while to get it to sit in perfect for the lock to work, but so far with LPL it's been a piece of cake every time. Maybe that's an added bonus thanks to the rear guide? Anyhow, you may be thinking well the LPL to L is still a click-in adapter to the camera body. Correct, but Ron has created a collar that allows you to bolt the collar down to a plate along with the camera cage, then tighten the collar on the adapter and it's not moving. To be honest, even without the collar, these mounts are super accurate, so very little play with them to start with, but the collar just locks everything down tight. I always hated when using a follow focus (especially a focus motor) and every time you made an adjustment it shifted the lens in the mounts. Even the tiniest bit of movement showed up in the shot, so when you have two weak points, you get a lot of movement when you throw in some torque. With this setup, any movement between the lens and camera is now completely gone. I bought 4 LPL to L mounts and collars, instantly you should realize that is a big investment, but 100% worth it. Every time I use them, they make me happy, so thank you Ron and crew for continuing to push this industry forward!!

5
07/06/2024

[0.045 lb] I've tried a few different PL mount adapters of varying prices from low to high. I can say with certainty that this is one of the best I've ever used. It has great machining, tight tolerances with no play when locked in. The lens feel supported and secure with the handful of lens sets I've tried. I have used other Simmod products in the past and have been happy so far with the quality of everything. I highly recommend giving this a try.

5
05/05/2024

[Screw] I own (and love) my newer Blackmagic Design 6k camera with full frame sensor and Leica L mount. I also have a number of wonderful new and old Zeiss PL mount fixed cinema lenses. (18mm - 200mm) So when I saw this adapter for sale at B&H, along with a good review of it, I took the plunge. I am not disappointed.

With this adapter, a fairly heavy Zeiss lens with ARRI PL mount, like their CP.2 25mm for example, hangs off the Blackmagic camera with no discernible wiggle. The lens goes on and off a bit tight, but hey, that's what I wanted. It looks great too, with excellent machining and black surface coating.

Note that — nothing to do with this excellent adapter itself — my oldest 1970s vintage Zeiss Super-16 lenses, while still producing great images, do vignette at the image corners, from 9mm to 16mm when the Blackmagic camera is set to FF 6k, exactly as I expected. But I could not have verified that without this Simmod adapter. Note also that simply changing the Blackmagic camera setting to capture a more restrictive Super-35 4k size, allowed more of my older PL mount Super-16 lenses to be used. The lens coating on those older Zeiss is not quite as nice as the newer CP.2 or CP.3 but still hard to see much difference in most lighting conditions. Again, this Simmod adapter allowed me to test all this.

5
26/04/2024

[82 mm] Does it is expected to do

5
19/04/2024

[0.045 lb] Fits perfectly on my Lumix L mount camera and enables me to use a wide variety of true Cinema lenses. Been a charm to use

5
30/11/-0001

[82 mm] Every thing fits and works great. I use no name adapter rings and they fit lousley on the holder. Buy Cokins. There's a reason!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Simmod Aluminum Front Lens Cap 85mm Black

$195.00 $304.20

Simmod Variable Nd Filter 82mm 1.3-6 Stop

$375.00 $551.25

Simmod 82-114mm Front Pro Simring

$117.00 $157.95

Simmod Simtray 4x4 Adapter 82mm Filter

$144.00 $214.56

Simmod Aluminum 95mm Black Front Lens Cap

$195.00 $259.35

Simmod Aluminum Front Lens Cap 114mm Black

$267.00 $323.07

Simmod Aluminum 80mm Black Front Lens Cap

$180.00 $239.40

Products You May Like

Marshall Cv730-nd3 4k Ptz Camera 30x Zoom Ndi|hx3

$7,869.00 $11,173.98

14tb My Book Usb 3.0 External Hard Drive

$824.97 $1,196.21

Canare 4s11 Bi-wire Speaker Cable 6' Black

$202.50 $251.10

Gigabyte G27f 2 27" 170hz Gaming Monitor

$629.97 $768.56

Gigapan Epic Pro V Robotic Camera Mount

$3,767.85 $5,388.03

Dji Nd Filter Kit For Mini 4 Pro - 3-pack

$165.00 $221.10