The Comprehensive HDMI Male to HDMI Female Power Injection Adapter is designed to provide extra power to HDMI connections where the output power of the HDMI source is insufficient. To operate, simply connect the male end of this adapter to the HDMI output of your source device, connect an HDMI cable from the adapter to your display device, and connect the attached USB-A plug to an available 5V USB power source. The extra 5V of power will help boost the signal to maintain quality over the HDMI connection.

HDMI-A Male to HDMI-A Female Adapter    USB-A Power Connector with 3' Cable    Supports up to HDMI 2.1    Thin 4.5mm Outer Diameter

Related Questions and Answers

Q: 1. Will a 3.5mm input plug without threads work with the VXLR+?

A: Yes, a non-threaded 3.5mm input will work with the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter, the threading is simply for locking connections.

Q: 2. Does this work with Sennheiser MKE2 lav mics?

A: Yes, it can work with MKE2 lavalier microphones.

Q: 3. is this needed for zoom h6 and rode wireless go?

A: No. The adapter you want is the Rode VXLR (B&H # ROVXLR) since you only need to convert the 3.5mm plug to XLR. The VXLR+ is used when you are using a condenser style microphone like a lavalier mic with a 3.5mm connector and need to connect it to an XLR mic input on a recorder or mixer. For instance, if you have a separate lavalier mic that you use with the Wireless GO transmitter, such as the Rode Lavalier GO, it is a condenser mic that requires plug-in power, which is a low voltage. A recorder or mixer's XLR input can supply phantom power, which is typically 48V and way too much power for a lavalier mic. The VXLR+ converts the 48V to a much lower voltage and allows you to use a mic like the Lavalier GO which requires 2.7V and connect it directly to an XLR input on the H6.

Q: 4. Can this allow me to use a RODE videomicGO on a SONY HXR-NX100? The Sony only has XLR inputs.

A: It should. I use it on all my cameras that have XLR inputs and it works great.

Q: 5. Does this work with Sennheiser MKE2 mics?

A: Yes it will

Q: 6. Can someone describe what is connected to each 1/8 in. connection (tip. ring, sleeve) in terms of signal, power, and ground? (This would go a long way to answering compatibility questions.) Thanks.

A: Although a specific wiring diagram is not available for the input connection on the Saramonic C-XLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter, we can confirm that this adapter is compatible with microphones using the common "Sennheiser" wiring configuration, which Saramonic lavaliers also use. This adapter is not compatible for use with microphones wired for compatibility with Sony wireless transmitters.

Q: 7. I'd like to connect my on cam cold-shoe shotgun mic (sennheiser, takes AAA) to audio mixer (zoom F4). Is this what I'm looking for?

A: You can use that but it isn't necessary. You can use a simpler adapter like B&H # KOAXMMF or B&H # ROVXLRB&H # ROVXLR

Q: 8. Can I use this on my sinhieser xwd wireless lav to connect to my c100 mark 2 with the top handle attacged

A: Hello Ben. The VXLR Plus is a 3.5mm TRS Female to XLR Male adapter and converts phantom power of P48 down to plug in power (2-5v). If that's what you need to do and you have the proper connections then, yes, it should work. If you don't need power then the Rode VXLR would work just as well.

Q: 9. Will this work w/ Sony PXW-Z90V? I dont understand the whole power converter thing

A: Yes the Saramonic C-XLR+ will connect to a mic input on the Sony PXW-Z90V.

Q: 10. My guess is that you can’t, but is it possible to only buy the phantom power converter?

A: The RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter adapts an XLR input with phantom power to a 3.5mm input with plugin power. There is no consumer device that does this without any connectors, although some type of OEM circuit may be available from electronics suppliers if you are working on a custom build.