Polymaker 1.75Mm Polymax Pla Filament 750G Gray

Polymaker 1.75mm Polymax Pla Filament 750g Gray

Product Code: eq155694
Availability: In Stock

$63.72 $90.48

Qty

16 reviews Write a review

Description
Reviews (16)

Polymaker 1.75mm PolyMax PLA Filament 750g Grayfrom Polymaker 1.75mm PolyMax PLA Filament 750g Grayis designed as an easy-to-print filament with improved mechanical properties. Part of the PolyMax family of 3D printing filaments, PolyMax PLA is produced with Polymaker's Nano-reinforcement technology to deliver exceptional mechanical properties and printing quality.

PolyMax PLA is compatible with most of the 3D printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.

PolyMax PLA also features Polymaker's Jam-Free technology, which improves the heat stability of the filament with softening temperatures over 284°F. As a result, the filament shows minimal softening in the cold end and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams.

Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.

Designed As Easy-to-Print Filament Nano-Reinforcement Technology Improved Mechanical Properties 750g Weight Accuracy 374 to 446°F Print Temperatures 40 to 60mm/s Print Speeds

Parameters
Filament Diameter	1.75 mm
Filament Material	PLA
Filament Properties	No
Color	Gray
Weight	1.7 lb / 750 g

374 to 446°F

40 to 60mm/s

77 to 140°F

Glass, Blue Tape, BuildTak

Related Questions and Answers

Q: 1. 8x10 card 1 or 2 ?

A: There are two cards in the package: One 4 x 5 (100 x 125mm), and one 8 x 10 (203 x 254mm)

Q: 2. Would this hold a roll of 35mm film?

A: I tried it. The pouch will hold a roll by itself and the flap closes completely. With the roll in its canister it sticks up a little, but the flap still closes enough to hold the film in.

Q: 3. What fabric is in the interior? Is it padded?

A: The entire pouch is a soft canvas cover.

Q: 4. could this fit a 13in MacBook m1 in the sleeve?

A: Unfortunately, a 13.3" MacBook M1 will not fit the included sleeve.

Q: 5. You have to take the bag off to access the camera?

A: You don't HAVE to. The bag can be swung off one shoulder and you can unzip the bottom area where the camera equipment is designed to be stored.

Q: 6. Does it come with the camera insert/dividers?

A: The Cooper DSLR Backpack comes with a removable camera insert with two dividers.

Q: 7. What are the dimensions?

A: The Calibrite ColorChecker Gray Balance card (CCGB) measures 8.5 x 11".

Q: 8. What are the dimensions of the camera space? It only lists the overal dimensions Thanks

A: The camera compartment is 5.5 inches tall by 9 inches wide by 4 inches deep.

Q: 9. will this fit my 50mm 1.4?

A: Hi Sam, the lens case you need for your 50mm 1.4 is the LP1014.

Q: 10. Can this be used for tray processing? I have always used the Polymax T solution in the past and can only find this RT version.

A: No, the, Kodak POLYMAX RT Developer and Replenisher (5L, to Make 25L) can not be used for tray processing. It is designed for Roller-Transport Processors.

Mikel	28/09/2024
[PLA] Clyde has been out for 6 months under various weather conditions. This Orange PLA turned out great for Clyde. 5

Steven C	23/09/2024
[1.75 mm] Although the amount of material is reasonable, a variety of colors are not included, like blue and black. 5

Daniel	18/09/2024
[PLA] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed. 5

David	01/09/2024
[1.75 mm] Polymaker is one of the best filaments out there and for sure the best company out there I can think of. They do so much good for the community so I'm always more than happy to support them any way I can. This stuff prints like a dream. 5

Daniel	17/08/2024
[PLA] This material is one of my hands down favorites. The color intensity is truly a charcoal black. To me, it beats all other silk materials because of its light diffusing properties. Its rough to the touch and doesn't have the dry time CF does. Fantastic material and I will keep buying it again and again 5

Daniel	01/08/2024
[PLA] This gold is the same as any other, the color is vibrant and the silk effect works well. Polymaker tends to be my go-to for these types of base material colors because the material works well, and I have the least number of issues for the price point. 5

Mikel	24/07/2024
[PLA] Pinky has been in my front lawn for about 6 months. This Pink is the best Pink PLA for Pinky. 5

Daniel	23/07/2024
[1.75 mm] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint 5

Chase	18/07/2024
[Gray] Another excellent Creality product! 5

Daniel	07/07/2024
[1.75 mm] Literally no reason to have this material, but its so fun. It glows bright and as expected, making stars, fidgets, light covers, what a blast. 5