Polymaker 1.75Mm Polylite Abs Filament 3Kg Black

Polymaker 1.75mm Polylite Abs Filament 3kg Black

Product Code: eq155863
Availability: In Stock

$149.85 $218.78

Qty

11 reviews Write a review

Description
Reviews (11)

Bring your creations to life with the Polymaker 1.75mm PolyLite ABS Filament 3kg Blackfrom Polymaker. Compatible with a wide range of 3D printers, this ABS material allows you to print high-quality models and working prototypes, ideal for seasoned and entry level users.

PolyLite ABS uses a specialty bulk-polymerized resin, producing lower volatile content and minimal odor during printing, keeping your work area neat and clean. This ABS filament operates at a printing speed ranging from 30 to 50mm/s, nozzle temperature of 473 to 509°F, and bed temperature of 194 to 212°F. Each spool comes in a resealable vacuum bag and includes a desiccant bag to help fend off moisture when not in use.

1.75mm Diameter Nozzle Temperature: 473-509°F Bed Temperature: 194-212°F Printing Speed: 30-50mm/s Desiccant Bag Resealable Vacuum Bag

Parameters
Filament Diameter	1.75 mm
Filament Material	ABS
Color	Black
Weight	6.6 lb / 3 kg
Packaging Info
Package Weight	9.36 lb
Box Dimensions (LxWxH)	12.7 x 12.6 x 5.8"

Related Questions and Answers

Q: 1. Would this fit an F5?

A: Yes, the Nikon Courier Bag (Black) will fit a Nikon F5 35 mm SLR camera body.

Q: 2. Will this work with the safety retention pins on Arca Plates? Yes or no?

A: No, it will not.

Q: 3. Is the ballhead's groove the standard size in order to fit the common Arca Swiss plates, or is it proprietary?

A: The mounting plate for the quick release is Arca-compatible.

Q: 4. Does the GoPro w/media mod output clean HDMI for a small video switcher (like new Atomos Ninja option), and if so - what resolution?

A: The GoPro Hero 10 with Media Mod will provide a clean hdmi out at 1080P/60fps. The below link will provide a list of supported resolutions. https://community.gopro.com/t5/en/Media-Mod-HDMI-Output/ta-p/585539

Q: 5. will the waterproof housing from hero 9 work with new version? as well as other items used with 9 version?

A: Yes, the waterproof housing will work with newer version of the product.

Q: 6. Can this camera take video without the fisheye effect?

A: After you shoot with the GoPro HERO10 Black, open in GoPro Studio, go to Advanced Settings and Remove Fisheye option.

Q: 7. Can this be used with a bluetooth microphone?

A: Unfortunately no. The GoPro Hero 10 will not have Bluetooth microphone capabilities.

Q: 8. Are the hero 6 batteries compatible with the Gopro Hero 10?

A: Batteries for the GoPro Hero 6 will not work for the GoPro Hero 10.

Q: 9. Does go pro only work with micro disk?

A: Correct. GoPro will only use Micro SD Cards.

Q: 10. How long can I ex=ect the battery to last?

A: Action camera batteries life span will vary based on the charge cycle, use of product and how the battery is carried for by the user.

Mikel	29/09/2024
[ABS] This took two spools of yellow to create this basketball size Pac Man for my front yard garden. This yellow PLA turned out great and has weathered for about 6 months with no discoloration. 5

Daniel	11/09/2024
[Black] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed. 5

Daniel	09/09/2024
[9.36 lb] This stuff is impressive. It has a much higher tolerance for printing fine pieces. Its sand-able and workable and much more rigid than PLA. It does have some issues I'm finding joints aren't as well supported because of the fiber content versus plastic but once I engineer the model to accommodate, it works amazingly well. 5

Daniel	04/08/2024
[1.75 mm] This gold is the same as any other, the color is vibrant and the silk effect works well. Polymaker tends to be my go-to for these types of base material colors because the material works well, and I have the least number of issues for the price point. 5

Daniel	23/07/2024
[9.36 lb] Literally no reason to have this material, but its so fun. It glows bright and as expected, making stars, fidgets, light covers, what a blast. 5

David	15/07/2024
[1.75 mm] Had some other brand ABS+ that was supposedly for high speed printers, but it was warping like mad. I bought this on a whim, and it worked perfectly first time. Have yet to have a failed print with it (knock on wood). 5

Mikel	29/05/2024
[Black] This Teal PLA turned out great. Inky has been out front for about 6 months under various weather condition and no issues. This turned out to be the best looking Teal for Inky. 5

David	12/05/2024
[ABS] Polymaker is one of the best filaments out there and for sure the best company out there I can think of. They do so much good for the community so I'm always more than happy to support them any way I can. This stuff prints like a dream. 5

Daniel	25/04/2024
[Black] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint 5