Qsc Ap-5102 10" Cinema Surround Loudspeaker

Product Code: eq15599
Availability: In Stock

$4,350.00 $5,437.50

Qty

20 reviews Write a review

Description
Reviews (20)

Designed for the latest immersive sound surround formats, the white QSC AP-5102 10" Cinema Surround Loudspeakerprovides uniform power-response from the Directivity Matched Transition (DMT) technology that matches the LF and HF coverage in the crossover region, as well as the axisymmetric waveguide for an uncompromised performance in both the vertical and horizontal axes. The wide 105° dispersion provides ideal coverage for large seating areas in a room with low-ceiling height.

The 15mm Baltic birch enclosure houses a 10" woofer and 3" compression driver, which combine for a frequency response of 60 Hz to 18 kHz (-10 dB) and a maximum SPL of 127 dB (peak). The loudspeaker can be used passively or bi-amped and accepts NL4 or barrier strip inputs connectors. QSC recommends a 720W amplifier capable of driving 8 Ohms. The QSC AP-5102 includes 15 threaded M10 insert points.

Designed for Cinema Applications Full-Bandwidth Reproduction 10" Woofer 3" Compression Driver Frequency Response: 60 Hz to 18 kHz Max SPL: 127 dB Peak Recommended Amp Power: 720W (8 Ohms) Axisymmetric Coverage: 105˚ Conical DMT Connectors: NL4 and Barrier Strip Includes M10 Threaded Inserts

PA Speaker
Configuration	2-Way
Total Power Capacity	Passive: 450 W Bi-Amp / HF: 80 W Bi-Amp / LF: 450 W
System Impedance	8 Ohms (Nominal)
Drivers
HF Driver	1 x 3" / 76.2 mm Compression Driver with 1.4" / 35.6 mm Throat
LF Driver	1x 10" / 254 mm Woofer
LF Voice Coil	3" / 76.2 mm
Magnet	HF: Ferrite LF: Ferrite
Performance
Frequency Response	60 Hz to 18 kHz -10 dB
Maximum SPL	121 dB (Continuous, Passive) 127 dB (Peak, Passive) 127 dB (HF, Continuous, Bi-Amp) 133 dB (HF, Peak, Bi-Amp) 121 dB (LF, Continuous, Bi-Amp) 127 dB (LF, Peak, Bi-Amp)
Coverage Angle	105° H x 105° V
Directivity	6.6 dB (Directivity Index) 4.6 dB (Directivity/Q Factor)
Speaker Sensitivity	94 dB
Connectivity
Audio I/O	Barrier Strip speakON NL4
Physical
Mounting	15 x M10
Construction Material	Metal Grille, Plywood
Dimensions	22 x 12 x 10.5" / 559 x 305 x 267 mm
Weight	48 lb / 21.8 kg

High-output loudspeaker for immersive sound surround formats
DMT (Directivity Matched Transition) ensures smooth, coherent power response throughout the listening area
Axisymmetric horn
10" woofer with 3.0" voice coil
3.0" voice coil compression driver with 1.4" exit
M10 threaded inserts and yoke mount fittings offer flexible and safe deployment options for a variety of applications
NL4 SpeakON connector and covered barrier strip terminals
Bi-Amp / Passive switchable
Clean industrial design with unadorned grilles complement most decors and settings
15-ply Baltic birch plywood construction
16-gauge powder-coated steel grilles

Related Questions and Answers

Q: 1. how many screws retain the rear portion to the speaker horn, and what is the center to center measurement on any of the two of the screws?

A: Atlas offers a full spec sheet for this unit including dimensions and mounting flange bolt pattern and specs. Please see the following link: http://bit.ly/1LrpIGe

Q: 2. It looks like the C221 is side-ported. How much space is required between them in an LCR configuration for the ports to work as designed?

A: The Ports sum with the LF almost in place. As long as the ports are not obstructed, there shouldn’t be an issue.

Q: 3. What amp would work with these speaker and theOklahoma Sound GSL-S-LWM-5 Greystone Lectern with Speaker and Wireless ?

A: JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 would work well with a powerful amplifier like the: Crown Audio XLS 2502 Stereo Power Amplifier (775W at 4 Ohm) B&H # CRXLS2502 775W at 4 Ohm Per Channel Band Pass Filter Per Channel Selectable Input Sensitivity Security Settings Disables Menu Buttons XLR, 1/4", and RCA Inputs Integrated PureBand Crossover System Efficient Forced-Air Fans Remote Power Trigger Peakx Limiters Provide Maximum Output Remote Power Trigger

Q: 4. do these connect with a speaker wire or something else?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 will require connection to an amplifier via speaker wire/cabling.

Q: 5. does this speaker have an individual volume control?

A: Do I hook up 110 power from a outlet to this

Q: 6. Is this for one or a pair?

A: This is a single speaker.

Q: 7. Maximum throw distance is 15m, but how close can the front be before driver integration and directionality compromises performance? Is 10 - 12 ft too close?

A: For all of the C211, The Horn is aimed down 10° and the system sums at about 3’ feet between the Woofer and Horn. The C221, C222, C222HP use a dual dissimilar technology that beams the HF downwards as required for commercial cinemas with stadium seating. I would not recommended these for home installs(with Limited Height) if the seats are not within the -20° angle of the horn.

Q: 8. Are these speakers weather resistant? For outdoor?

A: No they are not weather resistant. Enclosure Characteristics: Ingress Protection: IP-44 Operating environment: Designed for indoor use Operating Temperature: -4 to 122°F (-20 to 50°C)

Q: 9. How would these be in a 700sq movie viewing room?

A: A pair or two of the JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 would be thunderous in the small space you have described.

Q: 10. Is this price for 1 or 2 speakers?

A: Each system is one speaker unit.

Timothy	25/09/2024
[94 dB] As with all QSC products this works and fits the need I have and not breaking the bank. Sound and performs Great. 5

skip	14/09/2024
[94 dB] We installed two of these in a large space, that honestly needed about three times that many cabinets for coverage. We knew they would have to run at a high volume to be effective and they were! We powered them with the QSC RMX 2450 amp. They were clean, strong and tight. The client was happy and of course, so were we! 5

Amrit	01/09/2024
[94 dB] Decided to purchase this specific model and shopped around for the beat deal. Not only did B&H have them listed as the lowest price similar to sweet water & guitar center. They threw in speaker stands, cables and carrying case with a bonus Bluetooth module! 5

Mayer	28/08/2024
[94 dB] LOUD & CLEAR!!! 5

Lampa	07/08/2024
[2-Way] Excelent!! I have no words to splain,,,,,thank. B&H 5

Matthew	01/08/2024
[94 dB] This is an amazing cinema speaker. I ordered one to try before I purchased two more to complete my LCR setup in my dedicated home theater. The clarity is amazing. I no longer feel I’m straining to hear the audio that before felt like was “up in front”, this delivered the sound to me in my seat. 5

Sergey	01/08/2024
[2-Way] At home stereo set up, wanted to try new tech, noticed local rental joints are exclusively QSC (no passive speakers though). Ordered smallest QSC speakers - I liked their look for home and their 85 degree pattern; with the idea to return them if I don't like the sound . I employ them with a 200W Mackie amp and SVS-SB3000 sub, through a DDRC-24 Dirac Live room corrector. The result is very pleasing, and the Tannoys are now retired. There is more clarity in the sound and I can push more (a lot of) power into the system with the clarity still remaining there. I don't have to sit on the sofa to enjoy the sound, so 85 degree pattern is working well. Note they are not flat, they require EQ/DSP corrector. 5

Skip	29/06/2024
[2-Way] I bought 2 of these speakers to run out smaller workshop events with and to have them be the lead loudspeakers for our 500+ festivals where we rent 4-6 other similarly sized units. The vocals and cleanliness of music at nearly all volumes in unmatched. We love that these have a lot of manual controls (DEEP, flat, external sub + Vocal boost, normal) outside of the mixer to further tailor what we're using them for in any given set. Yes, these have the DEEP effect which adds a substantial amount of low end if you don't want to tie in subwoofers. Love them. 5

Pete	03/06/2024
[2-Way] I've had a pair of these for a few years now. They work very well as stage monitors. I use mine primarily as a monitor for my keyboards when performing. There is a multi-position switch that changes the EQ depending on the listening mode, but I usually leave it in Stage Monitor mode. Inputs are combination XLR / 1/4 TRS jacks. However, the daisy-chain connection to another monitor is XLR only - not 1/4 TRS, which is a pain in the neck sometimes. And the volume setting on the first monitor determines the maximum volume setting on any daisy-chained monitors. Overall, a very rugged monitor that has been dropped a few times and taken its share of abuse, but has never failed me. And it's a lot smaller and lighter than comparable stage wedges. To make sure I never lose the power cord, I have caribiners on the handle and the AC cord that I just snap together when transporting it. B&H occasionally has sales on these and also bundles (stand and XLR cable) - jump on those sales when available! 5