Polymaker 2.85Mm Polylite Petg Filament 1Kg Gray

Polymaker 2.85mm Polylite Petg Filament 1kg Gray

Product Code: eq156008
Availability: In Stock

$46.83 $66.50

Qty

18 reviews Write a review

Description
Reviews (18)

This Polymaker 2.85mm PolyLite PETG Filament 1kg Grayis a cost-effective PETG filament with balanced mechanical properties. Part of the PolyLite family of 3D printing filaments, PolyLite PETG is made with quality raw materials to deliver exceptional quality and reliability. PolyLite covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.

PolyLite PETG is compatible with most of the 3D printers available on the market, including the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.

Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.

Cost-Effective PETG Filament Balanced Mechanical Properties Made with Quality Raw Materials 1kg Weight Accuracy 446 to 464°F Print Temperatures 30 to 50mm/s Print Speeds

Parameters
Filament Diameter	2.85 mm
Filament Material	PETG
Color	Gray
Weight	2.2 lb / 1 kg
Packaging Info
Package Weight	2.865 lb
Box Dimensions (LxWxH)	9.2 x 8.5 x 2.8"

446 to 464°F

30 to 50mm/s

158 to 176°F

Glass with glue, PEI sheet

Low for better surface quality / off for better strength

Related Questions and Answers

Q: 1. Can this unit hold a battery for the Nikon D90 or 3000 or D7000 with the battery cover attached?

A: Yes. We use neoprene for the pocket so it can stretch to fit.

Q: 2. What are the internal dimensions of both the upper compartment and lower compartment?

A: Exterior 19 x 11.5 x 6" / 48.26 x 29.21 x 15.24 cm Laptop Compartment Dimensions 10W x 10H x 0.25D in Interior 10.5 x 8.5 x 4.5" / 26.67 x 21.59 x 11.43 cm Inside Dimensions 10.5W x 8.5H x 4.5D in.

Q: 3. Does this have a pouch for xtra batteries?

A: I'm sorry, no.

Q: 4. will this fit my 50mm 1.4?

A: Hi Sam, the lens case you need for your 50mm 1.4 is the LP1014.

Q: 5. Will this accommodate a Panasonic DMW-BLC12 battery (for the Lumix DMC FZ1000)? thank you

A: Yes this pouch would hold the Panasonic DMW-BLC12 Battery just fine. The size of the battery is similar to a DSLR Sized Battery.

Q: 6. Is this good for white balancing for for video in davinci resolve or should I get a white card?

A: Yes. but look into the following for better ICC profile results Calibrite ColorChecker Classic Classic BH #CACCC • MFR #CCC https://bhpho.to/3B1N8AG

Q: 7. Will a Watson NP-BN1 Lithium-Ion Battery Pack,for the Sony DSC-W800 fit this case?Looking at that camera as a back up.

A: You could put quite a few of those batteries in this pouch.

Q: 8. What fabric is in the interior? Is it padded?

A: The entire pouch is a soft canvas cover.

Q: 9. What is the longest lens that can be accommodated in the lower compartment?

A: A telephoto 70-200mm lens.

Q: 10. Will this hold VB 26 batteries for a Godox V1 flash?

A: No, the Tenba Reload 1-Battery Pouch (Gray) is a touch too small for the VB-26 battery,

Mikel	24/09/2024
[2.865 lb] This took two spools of yellow to create this basketball size Pac Man for my front yard garden. This yellow PLA turned out great and has weathered for about 6 months with no discoloration. 5

Brent	17/09/2024
[2.85 mm] I have used many types of filament. For me the Creality Filament is a great filament at a great price. I use it exclusively in my Bamboo X1 Carbon. Good stuff. 5

Daniel	14/09/2024
[2.85 mm] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed. 5

Daniel	27/08/2024
[2.865 lb] This stuff is impressive. It has a much higher tolerance for printing fine pieces. Its sand-able and workable and much more rigid than PLA. It does have some issues I'm finding joints aren't as well supported because of the fiber content versus plastic but once I engineer the model to accommodate, it works amazingly well. 5

David	08/08/2024
[2.85 mm] This filament works great at high speeds in the creality k1 max. I've printed things I 48 hours that would have normally taken 7 days. 5

Francisco	06/08/2024
[Gray] Excellent Filaments 5

Daniel	04/08/2024
[2.85 mm] I was skeptical at first, but this material really is chrome(ish).... as shiny as I've found, and boy is it fun to work with. This one wont dissapoint 5

Mikel	22/07/2024
[PETG] This Teal PLA turned out great. Inky has been out front for about 6 months under various weather condition and no issues. This turned out to be the best looking Teal for Inky. 5

Thomas	18/07/2024
[2.865 lb] This item arrived quickly from BH Photo. It was packed well with no damage. The storage box is large and can allow 2 1kg rolls or one larger roll to be stored. It has a nice dessicant storage space and humidity guage. It is a bit pricey since you can also get a heated drier/storage box that is less money now days. I just wanted a box without the cord attached. 5