The E-Image GC102 Carbon Fiber Tripod with GH15 Headsupports cameras and accessories weighing up to 39.6 lb. The head and legs feature a 100mm ball/bowl, which provides a wide support platform. The legs are made from carbon fiber so they are lightweight and corrosion resistant, and they feature three leg sections with mono-lock leg locks. The mono-lock design allows you to lock and unlock all the sections of each leg using only one rotating locking lever. The tripod legs support up to 133 lb of load and are adjustable from 32.5 to 68.5". The legs feature spiked feet and come with a ground level and a mid-level spreader, as well as rubber feet to cover the spiked feet.

The GH15 head features a sliding balance plate system for attaching the camera to the head. It provides 10 counterbalance settings (zero to seven) that help the fluid head support loads up to 39.6 lb. With five fluid drag grades plus a zero setting on both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot. The head features a built-in 1/4"-20 accessory socket for available monitor support arms or other accessory items. It includes a padded carry bag with shoulder strap.

Supports up to 39.6 lb    100mm Ball/Bowl    3-Section Legs with Mono-Lock Design    32.5 to 68.5" Tripod Legs Height Range    9-Step Counterbalance Plus 0 Setting    5 Steps Plus 0 Fluid Pan & Tilt Drag    1/4"-20 Threaded Accessory Socket    Includes Ground Level Spreader    Works with Available Mid-Level Spreader    Padded Bag with Shoulder Strap

Mono-lock design allows you to lock and unlock the three sections of each leg using only one locking lever. The rotating lever provides a robust clamp mechanism that secures the legs and prevents them from slipping once locked. The single lever on each leg allows you to quickly lock the leg height without having to use two levers, making for a quicker workflow and sparing you from bending down to open the bottom leg lock to raise the legs fully.

The legs feature spiked feet that provide solid purchase on soft surfaces when not using the included ground level spreader.

The ground level spreader attaches to the spiked feet for working on delicate or hard surfaces.

The included mid-level spreader allows you to work on uneven terrain, such as stairs or rocks, while preventing the legs from flying apart. When using the mid-level spreader, you can use the included rubber feet to protect delicate surfaces from the tripod's foot spikes.

The head features a tilt range of - 60 to 90°, which allows you to tilt the camera so it points from almost straight down to straight up.

The 100mm bowl/base provides a wide platform for balancing and working with cameras and accessories up to 39.6 lb.

The bubble level illuminates at the touch of a button.

Related Questions and Answers

Q: 1. Are there any compatible quick releases for the gp2 plate? looking to add one to my shoulder rig.

A: We are not aware of a Quick Release System that is compatible with the GP2 plate. However you could always install a quick release assembly like the Manfrotto 577 to both the top of this tripod and your shoulder rig. From there you will be able to switch between the tripod and shoulder rig with a Manfrotto 501PL style plate.https://bhpho.to/2mRIakh

Q: 2. Does the new Manfrotto 2 in 1 spreader fit with these legs? Ikan does not have a telescopic spreader and the ground spreader is too much of a hassle.

A: It does not. The Manfrotto 2 in 1 Tripod Spreader, BH #MAMVASPR2N1, is only compatible with the Manfrotto 645 FTT and 635 FST series tripods.

Q: 3. How much does this weigh without the ball head?

A: I have contacted K&F and they are unable to provide the weight of the K&F Concept BA225 Carbon Fiber Tripod without the Ball Head.

Q: 4. Hi! I plan to use this tripod with a Sachtler aktiv fluid head, but for that I need to make sure of the compatibility. There is a centered hole in the bowl where the head is mounted and I would like to know it's diameter. Could you please check it for me?

A: Yes. The following unit will adapt to the 75mm bowl drop.

Q: 5. It says with 75mm ball but see the ball nowhere in any of the photos of descriptions. Rather it says 75mm bowl. Does this version come with a ball?

A: This product doesn't include a tripod head. You can get the same version with the head.

Q: 6. Can I ship immediately if I place an order?

A: As of the time of this posting, December 3rd 2018, this product is in stock and ready to ship.

Q: 7. Does this include Quick-Release Adapter with plate?

A: Hello,a quick-release system is built into the head of this tripod kit. The kit includes a quick release plate, and you can buy an extra under the SKU GP1 if you want to prep for quick-swapping or are unfortunate enough to lose plates easily.

Q: 8. Anyone had any luck replacing the center column after use as a monopod? Can't get it reconnected for the life of me.

A: If you are having difficulties with the K&F Concept BA225 Carbon Fiber Tripod with Ball Head, you can contact the company at customer@kentfaith.com

Q: 9. It is written that it comes with mid-spreader with rubber foot, but I don't see it in the picture. Could you confirm it?

A: The mid-level spreader, ground-level spreader and rubber feet are all included with the E-Image Two-Stage Carbon Fiber Tripod.

Q: 10. I'm planning to purchase this kind of tripod but do I need to purchase Manfrotto 520BALL 75mm Half Ball too in able for me to mount my Manfrotto 502AH Pro Video Head with Flat Base? Does it included in the package?

A: The Manfrotto 520BALL 75mm Half Ball is not included with this tripod. You will have to purchase it as well to mount the 502AH head on it. https://bhpho.to/2P4qQZm