The Polymaker 2.85mm PETG-ESD Filament 500g Blackpairs electrostatic dissipation (ESD) with PETG with improved toughness. PETG-ESD is compounded with carbon nanotubes that allow it to dissipate electrostatic charges, thanks to its low surface resistivity. This innate property offers protection to delicate electronics during the electronic assembly processes or when printing electronical housings.

2.85mm Filament Diameter    500g Weight    PETG + ESD Material

• Printing Temperature: 482 - 554°F / 250 - 290°C
• Bed Temperature: 158 - 176°F / 70 - 80°C
• Printing Speed: 30 - 50 mm/s
• Fan: 20%

• Direct Drive
• Retraction Distance: 1 mm
• Retraction Speed: 20 mm/s

• Indirect Drive
• Retraction Distance: 3 mm
• Retraction Speed: 40 mm/s

149°F / 65°C for 6 hours
(Only if the material has absorbed moisture)

Related Questions and Answers

Q: 1. Can I use the Joby Ultraplate on this ball head

A: Yes that plate will work on the Joby Ballhead X.

Q: 2. Does this case affect image quality ?

A: The GoPro Rollcage for HERO8 Black will not affect or interfere with the images of the GoPro HERO8.

Q: 3. The Overview states it's easily interchangeable. It has a universal mounting plate which stays connected to your camera and slides into the Ballhead X for easy setup and quick interchangeability; switch between cameras in an instant. Does this have a quick-release then? How does it and how fast does the thread that's attached tot he DSLR un-mounts from the GorillaPod?

A: Jimmy,If I am understanding your question correctly you are asking how quickly the mounting plate attaches to the camera or lens. There is a flip-up lever on the bottom of the plate so you do not need a screwdriver and it takes three 360 degree turns to fully attach the plate. If extreme speed is desired you could just buy more than one plate. This is not a tripod system that is going to hold a long heavy lens even if the lens has a tripod mount collar.

Q: 4. Is the gray colored shoulder strap pictured in the default product photo included?

A: Yes, the PortaBrace Sandbag Transporter (Black) comes with the Padded Shoulder Strap.

Q: 5. https://www.bhphotovideo.com/c/product/1274435-REG/gopro_aamic_001_3_5mm_mic_adapter.html BH #GO35MA MFR #AAMIC-001

A: Yes, the GoPro mic adapter is compatible the Hero 10.

Q: 6. Does anyone know if this strap slides easily with some tension, or does it require two hands to adjust the length?

A: You would need both hands to adjust BlackRapid Camera Leash.

Q: 7. Is there a split version of this cable? I would need it to attach a thunderbolt device to the macbook retina. Of course then I loose the power charging cable. or would the macbook get power from thunderbolt devices?

A: This cable will not work with the retina MacBook because the retina MacBook has no Thinderbolt capability. The retina MacBook has a USB-C port but it only supports USB 3.1, not Thunderbolt. This adapter requires that Thundebolt 3 be supported behind a USB-C type port in the computer. As of July 2016, no Mac supports Thunderbolt 3 behind a USB-C connector, although this capability will most likely be integrated in Macs coming out in the fall 2016.

Q: 8. is that screw 5/8?

A: No, the thread is an M10

Q: 9. What is the pan base diameter of this head?

A: Unfortunately, this information is not provided by the manufacturer.

Q: 10. On the Matte White, is the Black side Glossy? I am looking for Glossy Black floor board.

A: Yes, the backside on this is glossy. Enjoy!