Ditch the disposable AA batteries in favor of this Bushnell Rechargeable Battery Pack for CelluCORE Trail Camerasfrom Bushnell. Compatible with select dual-sim models, the battery pack replaces the dozen AA batteries that usually run the camera. Recharging is easy with the included USB-C cable and the battery has a life cycle of 200 charges.

3000mAh Lithium Battery    200-Cycle Lifespan    For Select CelluCORE Models

CelluCORE 20 Dual Sim (119904D), CelluCORE Live (119908D), and CelluCORE 20 Solar (119904S)

Related Questions and Answers

Q: 1. How long will the batteries last?

A: How long the batteries will last varies depending on the type of batteries you are using and the camera settings. Bushnell recommends using a full set of eight Energizer® Lithium AA batteries in these Trophy Cam HD Aggressor models to obtain maximum battery life. Please take a look at the following link: https://bhpho.to/34zNcJ6

Q: 2. Does this camera take still and video at the same time?

A: The Bushnell Core DS-4K No-Glow Trail Camera (Camo) BH #BU119987C • MFR #119987C cannot take still and video simultaneously.

Q: 3. What format does it record videos in? H.264?

A: TheBushnell Core DS-4K No-Glow Trail Camera offers 1280x720 pixels, Full HD 1920x1080 pixels or up to a 4K resolution 3840x2160 pixels.video options.-The highest resolution 4k- 3840 x 2160, is known as Ultra HD or UHD resolution, not H 264.

Q: 4. Where is the microphone located? Is the sound on playback or download clear?

A: The microphone is on the bottom, see the link https://www.bhphotovideo.com/c/product/1320648-REG/bushnell_119876c_trophy_cam_hd_aggressor.html

Q: 5. What are the file formats for video, time lapse and stills? I'm looking for something Mac compatible.

A: Video is AVI, time laspe and stills is jpeg.

Q: 6. Is A.C. power source available on this camera?

A: There is no AC adapter available. Only AA or The Bushnell solar panel for power.

Q: 7. Can you set specific hours to record?

A: Yes, the Bushnell Core DS-4K No-Glow Trail Camera (Camo) has Field Scan mode for this. Allows you to capture images without requiring a trigger during a specified time period and interval.

Q: 8. The night pictures are poor. The image data says it used a 1 second exposure. The ISO setting was 50, which is fine for a sunny day at the beach, but not at night. am I missing a setting to raise the ISO?

A: Page 32 &33 of the manual: 1. Night photos or videos appear too dark a. Check the battery indicator icon to see if battery power is full. The flash will stop operating near the end of the battery life. b. You will get the best results when the subject is within the ideal flash range, no farther than 100 ft/30m. Subjects may appear too dark at greater distances. c. Please note that when the Capture Number parameter is set higher than "1 Photo", or with very short Interval settings, some images may appear darker than others due to the quick response and rapid retriggering of the camera, allowing less time for the flash to fully recharge before firing again. d. Make sure "LED Control" in the setup menu is set to "High" to ensure maximum output. You can also try setting "NV Shutter" in the menu to "Low" (slower shutter speed=brighter images, with tradeoff of increased blur if subject moves rapidly). e. The ARD (anti-reflective device) shield can be removed to maximize flash output. See page 28 for more details. I saw no reference in the manual in selecting ISO

Q: 9. Are the prices on the web site in Canadian dollars?

A: Prices on our website are shown and charged in USD.

Q: 10. I'm looking at the CelluCore 20 solar powered camera. It mentions AT&T or Verizon. What provider does it use in Canada?

A: The Bushnell CelluCORE 20 Solar Cellular Trail Camera BH #BU119904S • MFR #119904S only utilizes AT&T or Verizon cellular data plans North America (USA or Canada)