With a versatile magnification range and a generous objective lens for a bright picture, the EOTech 2-12x40 Vudu X SFP Riflescope BD1 Reticlemeets hunters' needs at close to medium range. Zooming is easy and accurate thanks to the removable throw lever and laser-engraved magnification ring. The BD1 reticle is illuminated with 10 brightness levels and an "off" setting in between for easy return to the right setting for the conditions. The elevation and windage turrets are capped to prevent accidental adjustment and correct the impact point by 1/4 MOA per click, with a total adjustment range of 80 MOA at 15 MOA per rotation.

Illuminated Reticle, Second Focal Plane    10 Brightness Levels with "Off" Between    30mm Maintube    80 MOA Elevation & Windage Adjustment    1/4 MOA Adjustment per Click    15 MOA per Rotation    Capped Turrets    Laser-Engraved Zoom Ring    Removable Zoom Throw Lever

• Versatile 2-12x zoom magnification for a range of common hunting scenarios
• 40mm objective lens provides the light-gathering capacity required to keep views crisp and bright during lower-light times of day or in heavy cover
• 55.7' field of view at 100 yards on 2x; 9.1' on 12x

• Placement in second focal plane keeps reticle the same size throughout the magnification range
• Ballistic circles for 2, 4, 6, and 8 MOA holdover
• 10 brightness levels ensure the aiming point can be seen in bright daylight or in challenging light
• Off setting between levels allows easy return to preferred setting
• Runs on one included CR2032 coin cell battery

• Throw lever makes transitioning between magnifications easy and precise
• Precise 1/4 MOA impact point correction
• Wide 80 MOA elevation and windage adjustment range
• Parallax adjustment for long-range use

Related Questions and Answers

Q: 1. Does this require an active TB3 cable? Or will a passive one also work?

A: This device can work with a passive Thunderbolt 3 connection, so long as the wire is within the length limit of passive TB3.

Q: 2. How bad is the fan noise?

A: The device has no fans. It uses passive heat dissipation for keeping cool(er).

Q: 3. If I have 3 of these set up at 3 studio cameras, I would need 3 at the mixer. How would I use Talkback for the 3 operators?

A: If you connect all three Blackmagic Design 2110 IP Mini BiDirect 12G Converters to a computer via USB-C, you can use the Blackmagic Converters Setup software to rout your talkback to each operator individually or all three at once.

Q: 4. What’s the latency?

A: Generally, the expected latency of the Blackmagic Design 2110 IP Mini BiDirect 12G Converter would be about 2 frames, but if the signals are gen-locked, the latency would then decrease to just a few lines of resolution.

Q: 5. Can I use 3 of these on camera end with a 2110ip 3X3G on mixer's end using a switch like the one you offer or any 10g switch?

A: Yes, multiple Blackmagic Design 2110 IP Mini BiDirect 12G Converters can be connected to a mixer via network switch, your video mixer would just have to support 2110 IP video input to ingest the signals.

Q: 6. What's the maximum length the cat6 cable will be able to run?

A: When using the Blackmagic Design 2110 IP Mini BiDirect 12G Converter along with Cat 6A cable, you can do a run of approximately 100 meters.

Q: 7. Can this product convert or decode srt, tcp, rtsp transmissions from other systems? Like the teradek bond backpack or a live u?

A: The Blackmagic Design 2110 IP Mini BiDirect 12G Converter is not able to convert or decode SRT, TCP, or RTSP transmissions. It is designed to be used in studio environments with SMPTE-2110 IP systems.

Q: 8. I'm a left handed shooter. Does the mount flip to either side or just the right?

A: it will flip to either side you just have to remove the screws from the mount to the magnifier and turn it around

Q: 9. Are the SFP transceivers included in this unit?

A: No there are no SFP transceivers included with the Blackmagic Design 2110 IP Converter 8x12G SFP.

Q: 10. How much bus power is required for this unit?

A: The manufacturer does not specify, however a device such as this can range anywhere from 5-10 W maximum.