Add automation to your DJI RS 3 or RS 2 gimbal with an unmotorized Dana Dolly with this eMotimo Conductor SA2.6 Motion Controller RSI Dana Dolly Kitfrom eMotimo. The kit provides everything you need to add remote, wireless configuration plus automation to your DJI RS 3 or RS 2 gimbal stabilizer rig when using a Dana Dolly, including the wireless motion controller, an RSI 6-Pin cable, a remote wireless controller, a D-Tap to 2.1mm locking power cable, a 12 VDC power supply, a microSD card for firmware, and the Dana Dolly integration kit.

The Conductor SA2.6 features CAN 2 expansion and control ports, a FIZ port for the Tilta Nucleus M, a LANC shutter control port, a turntable motor port, a slider motor port, and an RJ45 Ethernet port for management. The Dana Dolly integration kit includes a motor pod, port cable, slider belt, and two belt clamps.

Motion Controller for DJI RS 2 and RS 3    Includes Dana Dolly Integration Kit    Automate Motion Control Tasks    Turntable Integration    Wireless Remote Control via Remote    Includes Power and RSI Cables

Related Questions and Answers

Q: 1. How long is each pipe? What is the total maximum length of the assembled track?

A: This kit comes with six 39" lengths of schedule 80 aluminum pipe. That would give you 117 inches for each side of the dolly track, which is just a bit under 10 feet of length.

Q: 2. Can this be used with two FIZ motors? Product Information says that it already comes with one.

A: The eMotimo Spectrum ST4 Pro Bundle + Dana Dolly Integration can support one (1) additional motor. However, a more advanced option from eMotimo to consider, that will support up to 7-axis control, is the eMotimo Spectrum ST4.3 + Fz Pro + Dana Dolly Integration Bundle (Gold Mount), B&H # EMST4P3GMLCD, and it would allow you to control two (2) motors and a turntable at the same time. The eMotomo Spectrum ST 4.3 uses standard Tilta Nucleus-M focus/zoom motors such as the Tilta Nucleus-M Motor Kit I (B&H # TIWLCT03M1). Please see the following link for details on setting up the motor: https://bhpho.to/46QVuuR.

Q: 3. Is there a way to control this with a Skaarhoj controller? Or control more than 1 with the provided remote?

A: No, Skaarhoj controllers are not compatible with the eMotimo Spectrum ST4 Motion Control Pan & Tilt Head.

Q: 4. Are the threads etched on to the outside of the pipe or does this come with threaded connectors?

A: the pipes have a thread cut inside, then they machined nipples with 2 male threads on them to join the tubes. you keep the nipple mounted on one side, and there is a protective rubber cap for when not in use.they are awesome for when you need to be moving around location, rather than dragging long pipe around.the threads are a little fine, be careful getting them started so you don't strip them.

Q: 5. Does B&H offer a case for this item? Doesn't have to be for flight/carry-on purposes.

A: Hi. Unfortunately at this time, we do not include a case with the kit.

Q: 6. Does this include a motor? Is it compatible with Kessler's Drag Module (BH #KECS1107)? I am trying to add more drag to a Dana Dolly.

A: Yes. The kit includes the following. Motor Pod & Hardware Belt Clamps (set of 2) Length of belt selected 6' Cat5 Cable The following unit is compatible with dana dolly original & universal track ends.

Q: 7. How do the pipes connect? Are they threaded on both ends?

A: Yes they are threaded on both ends - male on one end and female on the other. Great kit BTW, and you get real personal service from the owner at Dana Dolly.

Q: 8. can the universal track ends hold these pipes?

A: Yes, because the Dana Dolly Portable Aluminum Pipe Kit is made and compatible with the Dana Dolly Universal Track Ends.

Q: 9. Can I bolt this down permanently to a surface? I want to attach it to the wall if a balcony.

A: Yes, you could do that.

Q: 10. Can I use it with the Proaim Polaris Dolly and also are there curves trails for this purpose ?

A: This set is for the Dana Dolly and would also work with the Proaim Polaris dolly. We are not aware of a curved option.