Bring your creations to life with the Polymaker 1.75mm PolyLite ABS Filament 1kg Yellowfrom Polymaker. Compatible with a wide range of 3D printers, this ABS material allows you to print high-quality models and working prototypes, ideal for seasoned and entry level users.

PolyLite ABS uses a specialty bulk-polymerized resin, producing lower volatile content and minimal odor during printing, keeping your work area neat and clean. This ABS filament operates at a printing speed ranging from 30 to 50mm/s, nozzle temperature of 473 to 509°F, and bed temperature of 194 to 212°F. Each spool comes in a resealable vacuum bag and includes a desiccant bag to help fend off moisture when not in use.

1.75mm Diameter    Nozzle Temperature: 473-509°F    Bed Temperature: 194-212°F    Printing Speed: 30-50mm/s    Desiccant Bag    Resealable Vacuum Bag

Related Questions and Answers

Q: 1. Does the camera come with a battery or do I need to buy one?

A: Mine came with a battery

Q: 2. What lens band will fit my Canon 24-105mm f4L lens?

A: The LENSband Lens Band (Glow-in-the-Dark Green) listed as 67-110mm is the one that should fit the Canon EF 24-105 f/4 lens.

Q: 3. What are the dimensions of this camera?

A: Maybe 3 by 2

Q: 4. Would an NEC PA242W-BK monitor be able to fit in here safely? Maybe with the stand detached?

A: I would need to know the dimensions of the monitor. I bought it to keep an Epson V850 Pro scanner in it when not using it.

Q: 5. hello when i try to connect via usb to my mac pro nothing shows up. any help?

A: Here are several suggestions with the point to remember the computer wants to read the MicroSD card and not the camera. 1.Make sure the card is in the camera and is properly inserted. 2 Try a different USB input. This is particularly true on laptops and it will need to be a powered USB input. 3. Use a different USB cable; any with the correct connections will work. 4. Try a different computer. 5. Get another MicroUSB card, make sure to format it in the camera and try that.

Q: 6. Will this work with the 3DR Solo? In the Solo gimbal?

A: No. The SOLO gimbal is specifically made to attach to the GoPro body and back connection for direct connectivity to the camera.

Q: 7. Has anyone tested the USB webcam functionality of this camera on a Linux system? I'm wondering whether it might be recognized as a webcam device by a Raspberry Pi running the Debian 'Wheezy' operating system. Thanks!

A: SURE, BY MISTAKE I BOOTED MY COMPUTER INTO KUBUNTU 14 10 AND THEN IN FACE BOOK AND THE PERSON THAT I WAS CHATING SAW ME AND TOLD ME THAT SHE COULD SEE ME.

Q: 8. Is there any performance difference between the SJ4000 silver and the SJ4000 black?

A: There are no performance differences at all between the black and the silver versions. The only differences are cosmetic in nature.

Q: 9. What mounts are included?

A: According to the manufacturer's website, the following mounting hardware is included with the camera:1 x Waterproof Housing1 x Quick Release Buckle1 x Housing Backdoor with Holes1 x Handlebar Seatpost Pole Mount1 x Curved Adhesive Mount1 x Flat Adhesive Mount1 x 3-Way Pivot Arm Mount2 x 3M Adhesive Tape1 x Frame Mount1 x Quick Release Clip for The Frame1 x Vertical Quick Release J-Hook Buckle1 x Universal 1/4 Camera Tripod Mount1 x Tripod Mount Adapte1 x Bandage Set (actually straps)1 x Stainless Steel Safety Tethe4 x Nylon Cable Ties

Q: 10. My sister stole my charger because I would not let her temporarily have it because 4 times i told her not to press the power while recording but she did it 5 times so I have a G or two of locked footage and no charger except a micro USB for my phone, can I use that?

A: In our opinion, you should be fine if you use your phone charger to recharge the battery. On the other hand, you two have probably patched things up by now.