Designed by a team of former AKG personnel, the Austrian Audio OC818 Studio Condenser Microphone Kitis a large-diaphragm studio condenser microphone offering detailed audio capture and immense sonic customization for producers and engineers in personal and commercial recording facilities. The handmade 1" ceramic capsule features two gold-plated polymer membranes to enable multiple polar patterns. Utilize the 5-position switch to set the OC818 to figure-8, hypercardioid, cardioid, omnidirectional, or wide cardioid. Each diaphragm is routed to a separate output connector for dual-channel recording, which allows you to design custom polar pattern responses across five frequency bands via the open-source PolarDesigner plug-in or achieve a tweakable stereo image thanks to the StereoCreator plug-in (also open-source).

Alternatively, the secondary output can be connected to the optional OCR8 Bluetooth module if you wish to enjoy convenient wireless control and selection of 255 polar patterns via the free iOS/Android PolarPilot app. Front-panel switches are provided for easy access to the pad and roll-off settings. Set the pad to -10 or -20 dB to avoid distortion when miking loud sources such as drums or guitar cabinets. Activate the high-pass filter at 40, 80, or 160 Hz for attenuation of low-frequency problems including rumble and proximity effect. The OC818's housing is constructed of zinc-aluminum alloy for strength and durability. The OC818 Studio Set includes a vibration-reducing shockmount, a traditional mic clip, a mini 5-pin XLR to 3-pin XLR cable, a windscreen for mitigating noise from breaths and blasts of air, and a protective carry case.

For Vocals/Instruments in Studio & Stage    5-Position Polar Pattern Switch    Handmade Dual-Diaphragm Capsule    Per-Diaphragm Output Connectors    Selectable Pad at -10 or -20 dB    Selectable 40/80/160 Hz High-Pass Filter    Allows Wireless Remote Control via OCR8    44mm Dynamic Drivers    Over-Ear, Closed-Back Design    5 Hz to 28 kHz Frequency Response

• CKR12 ceramic capsule is handmade in-house at Austrian Audio's facility in Vienna
• Made to the same critical dimensions as the classic CK12 capsules
• Matched within 1 dB of every other OC18 or OC818 to allow the creation of stereo pairs (additional microphones available separately)

• High sensitivity and low self-noise means it can handle everything from a whisper to extreme SPLs without distortion
• Two-stage pad (-10 or -20 dB) to prevent distortion
• High-pass filter with three positions (40, 80, or 160 Hz) for reduction of low-frequency rumble and excessive bass

• 5-position polar pattern switch for figure-8, hypercardioid, cardioid (dual-cardioid mode when using the secondary output), omnidirectional, and "preset mode," which defaults to wide cardioid, but can be set to anything via the free iOS/Android PolarPilot app and optional OCR8 Bluetooth dongle (required for PolarPilot control)
• Microprocessor control of polarization voltages allows remote controlled polar pattern settings
• Dual outputs for recording each diaphragm separately
• Balanced 3-pin XLR main output
• Mini 5-pin XLR secondary output
• Includes mini 5-pin XLR to 3-pin XLR adapter cable for secondary output
• 48V phantom powered
• Includes shockmount, mic clip, windscreen, and protective carry case
• Debuts Austrian Audio's Open Acoustics Technology
• Works with select downloadable open-source plug-ins for extra flexibility

• Wireless control of polar pattern, pad, and high-pass filter settings in real time via Bluetooth (optional OCR8 required)
• Save, recall, and share favorite settings
• Discover and create 255 discrete polar patterns
• One setting can be stored in OC818 for use without PolarPilot app
• No digital technology in the audio or bias paths
• 60-second clipping monitor/logger

• Craft different polar pattern responses across 1-5 crossover bands
• Store, recall, and share presets
• Powerful Terminator AI for eliminating or rescuing selected frequencies and instruments
• Equalization control for imprinting the tonality of free-field or diffuse-field idealized responses
• Per-band solo/mute
• Supports comprehensive automation
• Linear phase
• Optimized for use with the OC818 in dual-output mode, but works with any dual-output source

• Stereo with one OC818
• Three different stereo techniques with fantastic post-processing possibilities using two OC818s
• One 4-channel recording, three different stereo techniques (X/Y, Mid-Side, Blumlein)
• Adjust spatiality in post processing
• Change stereo width in post processing
• Change orientation in post processing

• Create an Ambisonic B-format signal with two OC818 microphones

Related Questions and Answers

Q: 1. Does this include the ATH-M20 Headphones?

A: No, the headline description of the kit is wrong, but the product list farther down is right. It ships with Polsen headphones. They're listed on the current set up as Polsen HPC-A30 Closed-Back Studio Monitor Headphones.

Q: 2. The purchase of the microphone does come with the Cakewalk software does it not?

A: In the BoxSamson C01UCW USB Condenser MicrophoneStorage BagSwivel MountUSB CableTripodSoftware CD - SONAR CakewalkLimited 2-Year Warranty

Q: 3. Can this be used for karoke?

A: Through a computer you could....it just becomes a mic.

Q: 4. Before I place my order, can you tell me what additional accessories will I need to get started (aside from the computer)? Cables? Shock mount? Thanks!

A: The Audio-Technica Voice Actor Starter Kit ships with everything necessary to get started recording. The AT2035 mic ships with shockmount, and XLR cable for connection of mic to the interface is included as well.

Q: 5. latency?

A: When using headphones connected directly to the C)!U Pro you will receive a mix of the direct signal that the microphone is picking up with zero latency and the return audio from your software. When direct monitoring is disabled you are hearing return of all signal from your software and latency will depend on the computer specs and settings. With the speed and efficiency of currently available processors, latency is rarely an issue.

Q: 6. Can this be used for podcasting?

A: Hello, Thank you for contacting Samson Technologies. The C01U would work well for your podcasting needs! Another option to look into as well would be our G Track Pro microphone which has some different pick up patterns that may make it easier to execute a more conversational/interview podcast. If you have any other questions or inquiries, please let me know at any time. Best Regards, James

Q: 7. We bought this Mic and expected an xlr cable which was not included. Was a cable supposed to be included?

A: No, an XLR cable is not included with the AT2035 microphone. The mic comes with a shockmount and protective pouch for storage.

Q: 8. Which foam style pop filter(s) best fit this mic?

A: Hello, Thank you for contacting Samson Technologies. Our PS01 pop filter would work great in front of this microphone! If you have any other questions or inquiries, please let me know at any time. Best Regards, James

Q: 9. Is it side address or top?

A: Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

Q: 10. Does it come with a case?

A: The Samson C01U will ship with a Storage Bag.