Featuring an aluminum frame with small built-in magnets, the Kolari Vision Magnetic IRND Filter for RED KOMODO 6-Stopfrom Kolari Vision Magnetic IRND Filter for RED KOMODO 6-Stopsecures magnetically to the RED KOMODO cinema camera lens mount to sit securely between your camera and lens. It is a great solution when your lens doesn't feature front filter threads or if you want to add an additional filter to your single-filter matte box setup. This IRND filter provides a 6-stop reduction in light passing through the lens and filters out unwanted IR to keep the light neutral.

The filter glass features an antireflective multicoating, making the filter dust, scratch, and water resistant. It is designed to increase the transmission of light through the lens to the sensor, and it helps reduce flares and ghosting. A separately available mag mount accessory is required for attaching the filter to the camera.

Magnetically Attaches to Camera Mount    ND Filter, 6-Stop Light Reduction    Built-In IR Filtering for Neutral Look    Sits Between Camera and Lens    Aluminum Frame with Built-In Magnets    Requires Separately Available Mag Mount    Antireflective Multicoated Glass    Dust, Scratch, and Water Resistant

ND64
Light reduction: 6 stops

• Optical glass with multicoatings
• Water resistant
• Smudge resistant
• Dust resistant
• Scratch resistant

Related Questions and Answers

Q: 1. Is this compatible with RED's DSMC2 Line?

A: No it is not. it is made Specifically for the RED Komodo.

Q: 2. Does the cable work with Tilta Advanced Focus Handle with Run/Stop?

A: The Tilta Nucleus Nano R/S Cable is only compatible with the Tilta Nucleus Nano. For the Tilta Advanced Focus Handle with Run/Stop, you would need the Advanced Side Handle Run/Stop Cable for Red Komodo Camera. https://www.bhphotovideo.com/c/product/1607246-REG/tilta_rs_ta3_rd4_advanced_side_handle_run_stop.html

Q: 3. Can this be used with the 7" DSMC touchscreen?

A: The RED DIGITAL CINEMA KOMODO Link Adapter (B&H# REKOMODOLA) may not be used with the RED DIGITAL CINEMA DSMC3 RED Touch 7.0" LCD Monitor (Direct Mount) (B&H# REDSMC3RT7).

Q: 4. There are two posts with different answers from B&H. In Feb 2021 Geetika writes "You can purchase the Wooden Camera B-Box for the RED Komodo and there is a R/S port on the box. https://www.bhphotovideo.com/c/product/1572815-REG/wooden_camera_280500_b_box_red_komodo.html" implying it's a 3 pin connector. But in March 2022 Gracem writes "One end is 7-pin for connecting to one of the Tilta Nucleus-M motors, and the other end is the 9-Pin LEMO to plug in the EXT port on the Komodo.". So it 3 or 9 pin? Can you please give us a definitive answer?

A: The Tilta Nucleus-M Run/Stop Cable for RED KOMODO (27") is designed to connect to to connect directly from a Tilta Nucleus M controller and not through the B-Box.

Q: 5. I think the confusion in all these questions, which is still not answered is.... does this cable just go into the EXT port at the back of the KOMODO... is that the "R/S" port. Can the Tilta representative please answer this? And does it matter which port it comes into on the motor? 1, 2? no matter? (Just bought this cable)

A: The R/S function is shared within the EXT port. Any reference to the RED KOMODO's R/S port is going to point to the EXT port. The Tilta Nucleus-M Run/Stop Cable for RED KOMODO uses the EXT port on the RED KOMODO.

Q: 6. Can this be used to interface with the DJI RS2?

A: The RED KOMODO Link Adapter is meant to be used with a mobile device for wired camera control and Files Transfer Protocol Secure functions through the UBS-C port. As of 7/11/21, the RED Komodo Link Adaptor does not support DJI controls.

Q: 7. Would the new RED Komodo X Top Handle fit on top of this side handle?

A: No, the RED Komodo X Top Handle will not connect to the top of the RED DIGITAL CINEMA KOMODO Outrigger Handle. You would have to choose one or the other handle.

Q: 8. This cable looks like it would work to connect the Tilta Side Wooden Handle 2.0 with R/S Button to the Komodo EXT port to allow run/stop. Anyone confirm?

A: Tilta does not currently have a Side Wooden Handle that is designed to work with the Red Komodo.

Q: 9. Will this cable also power the focus Nucleus-M motor?

A: The Tilta Nucleus-M Run/Stop Cable does not power the Nucleus-M focus motor.

Q: 10. How much does this weigh? (Not the package; the actual item)

A: Approximately 0.97 lbs (440 g)​